this is my first swap im trying.

i havent done much because i need a half shaft. i dont want to risk firing it up with no axle in the trans.

just to keep you guys happy, a little update

ordered an egr block off. the weird thing about having the millenia intake on the probe block is that the egr is now in two different places. millenias have the egr on the manifold while probes, mx6s, and 626s have them on the block...so i had to get one for the block as well. the plate on the block is an oem one off a millenia.

the aftermarket one


the oem one, tried my best to get a decent picture..



here's a little taste of the wiring nightmare. im starting to get the hang of it...kinda. i havent really cut deep into the harness yet. where my hand is the part of the harness that i need to dig through. same goes for the other picture with the green and yellow plugs on it. i wont be needing most of that anymore.





under the dash.


the new harness and fuse box i have to somehow work in.



hope to make some real progress soon. ive got to finish taking the 4 cylinder loom apart to keep the necessary wires.