What the...?

[94ej2]

that 626 backet looks scary if mikes welding it in....its thin. get some cardbox box and some plate of metal go to work with it. do it right the first time.

[xdavidscenex]

he is doing it right im there :p

[.:Stirfry:.]

lies

[DeeAOne]

the passenger side, is the 626 mount itself, or the 626 bracket also? And are u using the BF crossmember down bottom.

and is the passenger side mount on the trany bolted down? did any of them line up?

what mount are u using for the rear bottom tranny mount?

the pictures should explain most of it..lol

stock b6 crossmember, rear mount bolts up perfect. the front needs a little adjusted but will work. the passenger side motor mount is the hard part.


sterling the timing is done.

[jew_boy]

that 626 backet looks scary if mikes welding it in....its thin. get some cardbox box and some plate of metal go to work with it. do it right the first time.

bit my welding is pretty good now so

he is doing it right im there :p

lies

and you can take your ass else where

[FasTech]

GL on it, Louis.

[SlenderEG6]

i think u guys r doing a great job i seen the swap personaly today

[jew_boy]

i think u guys r doing a great job i seen the swap personaly today

Thanks mate.

[SlenderEG6]

^ ur bloody welcum m8

[94ej2]

i wasnt talking about your weld. you fukin jew. i was talking about the 626 bracket is thin.

[jew_boy]

i wasnt talking about your weld. you fukin jew. i was talking about the 626 bracket is thin.

its actually not that thin, i want to say its about 5/16 possible alittle smaller

[DeeAOne]

i think u guys r doing a great job i seen the swap personaly today

now you need to start on yours!

[SlenderEG6]

its actually not that thin, i want to say its about 5/16 possible alittle smaller

i think pt is tryin to say its possible to weld but not thick enough to get a good ENOUGH weld..... i dont think it will hold that big ass motor

[SlenderEG6]

now you need to start on yours!

start? ima head of u u just dont know it yet

[nemean]

fuck i dont know. black looks good but i dont like having a different colored bay than the car. to me that just says you got your car painted but didnt paint under the hood.

but black would be much easier than white.

Paint the bay black
That way if you ever do paint it anything but white... it'll work

[DeeAOne]

ahhhh idk. lol im leaning more back to white now. looking at it this morning and i think it will look clean with a fresh coat of white too.

[.:Stirfry:.]

and you can take your ass else where

aww is lil mikey mad..

[.:Stirfry:.]

ahhhh idk. lol im leaning more back to white now. looking at it this morning and i think it will look clean with a fresh coat of white too.

white bit

[JITB]

the pictures should explain most of it..lol

stock b6 crossmember, rear mount bolts up perfect. the front needs a little adjusted but will work. the passenger side motor mount is the hard part.


sterling the timing is done.

i was saying is that the 626 bracket or is it just the 626 mount? i cant tell. i asked because the mx3 passenger bracket bolts up differently to the chassis..

[DeeAOne]

i was saying is that the 626 bracket or is it just the 626 mount? i cant tell. i asked because the mx3 passenger bracket bolts up differently to the chassis..

the passenger side mount is a 626 mount and mount bracket. do you think the mx3 one would get rid of that gap?

[JITB]

the passenger side mount is a 626 mount and mount bracket. do you think the mx3 one would get rid of that gap?

yea man thats what ive been tryin to tell u..lol the mx3's bay and the bg/bf engine bay are identical. And the mount bracket on the passenger side of the mx3 gs mounts just like the 4cyl does, just the bolts that connect to the motor are different. The 626 is a whole different setup.

what are u using ont he passenger side as a mount and bracket?

try the 323 bracket on the driver side, and a mx3 v6 passenger side. If the driver side acts funny, try a bg driver side.

You might come out easier using a mx3 crossmember, that way you will be able to bolt in the motor to it, and mount the crossmember to the chassis anyway. Or just redrill holes in the bf crossmember for the mounts.

[DeeAOne]

hmm ill probably look for a mx3 mount since then. you say the 4 cyl mount will bolt on the wheel well ok, just not the engine right? its a little different?

[JITB]

hmm ill probably look for a mx3 mount since then. you say the 4 cyl mount will bolt on the wheel well ok, just not the engine right? its a little different?

no everything from the mx3 i mention is v6. i meant that the Gs passenger mount, mounts to the car like the protege. but holds the mount in a different position, so it bolts up to the v6, but uses the same bolt holes, as the 4cyl in the mx3, and the protege. If your gonna use anything. Its gonna need to be mostly mx3 gs v6, because thats the only chassis thats the closest to the BF that came v6.

[94ej2]

i think pt is tryin to say its possible to weld but not thick enough to get a good ENOUGH weld..... i dont think it will hold that big ass motor

yeah

[jew_boy]

aww is lil mikey mad..

naw I'm not mad. If I was mad I'd make sure to let ur ass know. PUNK

[94ej2]

this is a build thread. not high school drama. take that shit somewhere else.

[SlenderEG6]

^ x2

[jew_boy]

this is a build thread. not high school drama. take that shit somewhere else.

Pt stfu now the price is 400 for u

[.:Stirfry:.]

naw I'm not mad. If I was mad I'd make sure to let ur ass know. PUNK

.. .goes to grab my dictionary, flips the page to look up "cares".......
pages flip, fliping page, flips back, then flips the page again..
hhhhhhhmmmmm, word does not exist..
::..

[DeeAOne]

both of you gtfo, lol. meet up at the sonic or something and settle this, not here.

anyway. i havent had time to get out to the junkyard for a new mounts(rain everday and no money), so i snapped a few more pictures in daylight. ill get some more progress up soon.

you can really see where i need to do the adjusting now. the whole engine is leaning.

[.:Stirfry:.]

hey im not the one who has issues.
juss sayin
the person i have issues with is trista muahahaha

[SlenderEG6]

one sad thread....

[.:Stirfry:.]

one sad thread....

pick up yo fone fooooolll

[SlenderEG6]

pick up yo fone fooooolll

.........

[.:Stirfry:.]

.........

mkay.

[SlenderEG6]

anyways..... nice pics little loui.. u better be running by next season... ill be at the line waitin... ill give u a 1 semi length 2 bus lenghts a car length( with wheelie bar) and a motorcycle lenght( stretched) along with 2 hits!

[.:Stirfry:.]

awww i see whats goin on here

[SlenderEG6]

me too........

[.:Stirfry:.]

me too........

you blut e fluk/

[DeeAOne]

bump for an update. got the front mount done. one more left, then i can set it in and start wiring..