EF Squad's WhoresLounge

[toonz]

Hater 11 oh ok Halfwit! You must have alot of haters! Why do you think that we hate you?

[Halfwit]

Hater 11 oh ok Halfwit! You must have alot of haters! Why do you think that we hate you?
i know exactly why, cause im the youngest, and soo nto be best. n00b

[BTLFED]

Halfwit! Did you miss my kitteh?!

[Halfwit]

Halfwit! Did you miss my kitteh?!
nah but im almost tapped out.

[toonz]

Nobody hate's you (that I know of) LIRL!!!!

[toonz]

Oh my god here we go again with these damn cats LOL

[Halfwit]

Nobody hate's you (that I know of) LIRL!!!!
i have a list. your at the top.

[BTLFED]

nah but im almost tapped out.

LOL
http://img81.imageshack.us/img81/9307/1152773867135wc7.jpg

[BTLFED]

http://i2.photobucket.com/albums/y11/drloomis3/CaturdayNightFever.jpg

[Halfwit]

LOL
http://img81.imageshack.us/img81/9307/1152773867135wc7.jpg
dang

[Halfwit]

i wonder if dax picked up that BEAT.

[toonz]

Im at the top LOL GREAT!

[EvasiveEF9]

So uh...what are some good sources for JDM front conversions for our cars?

[toonz]

I dont hate you just sometimes your ass is annoying LOL

[Halfwit]

password:jdm.. they like 1200 ^^

[Halfwit]

I dont hate you just sometimes your ass is annoying LOLyour annoying all the time and i dont say shit.

[EvasiveEF9]

password:jdm.. they like 1200 ^^
Yeah, Hmotorsonline.com has them for like 700 for civic and 800 for CRx. Looking for cheaper, or east coast provider.

Found a shop in Ocala that has one on ebay right now for 500$ picked up...but I won't have 500 for about 2 weeks. Boo...

[BTLFED]

i wonder if dax picked up that BEAT.

I dunno but that thing was awesome.

http://i39.photobucket.com/albums/e152/penzoilthehippo/undress.jpg

[Halfwit]

LOL @ MY PARTS CAR.

[BTLFED]

What is so wrong with the body of that one?

[Halfwit]

What is so wrong with the body of that one?
front end.

[BTLFED]

Oh, well then lol

[EvasiveEF9]

front end.
Yeah, I see a fender and a tail light missing...

[Halfwit]

no u dont understand...when i got it it had no fenders, hood, bumper support, rad support ect.....oh yeah. it cost 250....already made it back..

[EvasiveEF9]

By racin' suckas in your d-series? ;)

[Halfwit]

no by selling parts off it...the d series sleeps on ppl though!

[EvasiveEF9]

And cats sleep on it :)

[toonz]

Damn that car is stripped LOL won't you meet up with me with that speedometer cable Buddy LOL

[toonz]

...................

[bigdare23]

:ninja:

[EvasiveEF9]

Just a public service announcement...bigdare sucks...

He doesn't show up to meets he starts.

He doesn't really have parts he says he has.

LoL, JKJK

Damnit, i think my phone is finally wasted for good...I knew putting it in that cup of powerade was a bad idea.

[bigdare23]

Just a public service announcement...bigdare sucks...

He doesn't show up to meets he starts.

He doesn't really have parts he says he has.

LoL, JKJK

Damnit, i think my phone is finally wasted for good...I knew putting it in that cup of powerade was a bad idea.


:blah: :blah: :blah: :blah: :blah:

I said I got ya............................................. I GOT YA! :goodjob:

[bigdare23]

halfwit, you really need this!

http://www.importatlanta.com/forums/showthread.php?t=105817

[EvasiveEF9]

LoL, just giving you a hard time.

So...EF crew may have the longest running thread on IA, LoL

[EvasiveEF9]

Just curious, what block does the ZC motor use? Like what would the ZC transmission hook up to? Would it mate a b or d series?

[toonz]

yup we are stronger than the other's

[toonz]

Just curious, what block does the ZC motor use? Like what would the ZC transmission hook up to? Would it mate a b or d series?


LOL no it won't LOL but I heard that someone's ZC shitted on someone's B16 just something I heard in the air LIRL

[bigdare23]

Just curious, what block does the ZC motor use? Like what would the ZC transmission hook up to? Would it mate a b or d series?

d-series my brother, its basically a 1st gen integra motor with ef motor mounts

[EvasiveEF9]

so basically...the ZC is like a DOHC d16?

If it's the D-series base, would the transmission mate a d-series motor?

[toonz]

yup

[bigdare23]

so basically...the ZC is like a DOHC d16?

If it's the D-series base, would the transmission mate a d-series motor?

it's like a d16a6 with a LS head (not really but similar). The tranny mates with any d-series.

[EvasiveEF9]

Hmm...cool.

[toonz]

Isn't D so smart LOL

[toonz]

Does anyone know if Scotsman is alright?

[bigdare23]

Isn't D so smart LOL

aint your pops smart! :goodjob:

[bigdare23]

damn we are almost up to 100 pages

[toonz]

ahahahahahahahahahahahahahahahaha!!!!!!!

[bigdare23]

who the baby toonz?

[toonz]

EF's run's this bitch!!!! We are more organized and we all get along and have a great time LOL everyone wants be like us LOL

[toonz]

Im not a baby ..........

[toonz]

Moral Orel is Corney as hell!

[bigdare23]

Im not a baby ..........

:gay:

[EvasiveEF9]

Does anyone know if Scotsman is alright?
What happened to him?

[bigdare23]

EF's run's this bitch!!!! We are more organized and we all get along and have a great time LOL everyone wants be like us LOL

And you know this!!!

[toonz]

What? Your a confusing ass guy! LOL that's my niece Grillin on dem Hoe's with her missing tooth LOL

[toonz]

nothing happened to him I was just wondering how is his swap going?

[bigdare23]

What? Your a confusing ass guy! LOL that's my niece Grillin on dem Hoe's with her missing tooth LOL


Why she crying??? Musta woke up to your face!!!




Hate Hate Hate Hate :lmfao:

[bigdare23]

uproot why u didnt come to the meet?

[toonz]

She's not crying LOL me and my boy was talking about grill's and she came up and said Uncle ToonZ do I have a grill LOL I said yeah LOL she says for real LOL I said yes LOL so I said show'em your grill like the rappers on TV and that was the mug shot that she gave me so I thought she was so funny I had to take a pic LOL

[bigdare23]

Here are a few picks from the meet. They arent great, but they will do (if someone has photoshop, can you light them up cuz I dont have it anymore)

http://i58.photobucket.com/albums/g273/bigdare23/EF%20meet/DSCF0001.jpg

http://i58.photobucket.com/albums/g273/bigdare23/EF%20meet/P1000153.jpg

http://i58.photobucket.com/albums/g273/bigdare23/EF%20meet/P1000154a.jpg

http://i58.photobucket.com/albums/g273/bigdare23/EF%20meet/P1000155a.jpg

http://i58.photobucket.com/albums/g273/bigdare23/EF%20meet/P1000156a.jpg

http://i58.photobucket.com/albums/g273/bigdare23/EF%20meet/P1000157.jpg

http://i58.photobucket.com/albums/g273/bigdare23/EF%20meet/P1000159.jpg

[bigdare23]

Now what bitches!!! LOL

http://i58.photobucket.com/albums/g273/bigdare23/DSCF0005.jpg

http://i58.photobucket.com/albums/g273/bigdare23/EF%20meet/newEFDynoresults.jpg

[toonz]

Look at the Gangstaz LOL

[toonz]

looks like the hatch's were running things this time LOL don't worry I'll be there next time REX's LOL

[toonz]

http://i58.photobucket.com/albums/g273/bigdare23/EF%20meet/newEFDynoresults.jpg

LOLOLOLOLOLOLOLOL you wish homey:lmfao: :lmfao: :lmfao:

[toonz]

jk

[toonz]

well im out guys...............

[Halfwit]

i saw cliff an his girl in teh pic!! weirdo.

[Halfwit]

halfwit, you really need this!

http://www.importatlanta.com/forums/showthread.php?t=105817
YEAH RIGHT, zc trannies are the worst thing to happen to a turbo d, unless u have under 140 whp. they have short gears, so all i do on mine now is spin 1-3 even rolling, on drag radials.

ZC TRANNIES SUCK unless u have a all motor d series.

im looking for a dx or an hf.

[EvasiveEF9]

Hey, halfwit, I've got a DX (I believe) tranny in the basement...trade it for your ZC if you want since I'm not going to turbo that motor...

[DrunkScotsman]

i got a d series dx tranny

[EvasiveEF9]

scotsman, was your old one DPFI or MPFI?

[DrunkScotsman]

i started with the d15 -dpfi , then went to the d16a6-mpfi , now the b16a-mpfi

[DrunkScotsman]

i still have most of the d16 in my garage

[DrunkScotsman]

D , i'm hurtin on those axles , thats all thats left

[EvasiveEF9]

I've got a lifetime warranty with napa if you happen to make it to woodstock this weekend with some cores...

[DrunkScotsman]

i might take you up on that , i'll let you know! thanx

[Halfwit]

i got a d series dx tranny
how much?

ef9, not trading zc, its already sold...when i swap it

[EvasiveEF9]

LoL, I'd give it to you if I had something else to put back in when I use the engine on something else.

[Halfwit]

yeah, but ppl like the zc, so its better for me to sell it, and buy a dx cause they should be cheap, need to make my money back for buying parts car.

[EvasiveEF9]

LoL, I hear ya. I think I picked up my DX for like 100$ picked up. No grinds. Thing is smooth.

[EvasiveEF9]

Looking at folding mirrors for my civ. Will the CRx folding mirrors fit on the Civ hatch?

[bigdare23]

yeah, but ppl like the zc, so its better for me to sell it, and buy a dx cause they should be cheap, need to make my money back for buying parts car.

People still rock the single cam??? nawwww cant be LOL

[bigdare23]

YEAH RIGHT, zc trannies are the worst thing to happen to a turbo d, unless u have under 140 whp. they have short gears, so all i do on mine now is spin 1-3 even rolling, on drag radials.

ZC TRANNIES SUCK unless u have a all motor d series.

im looking for a dx or an hf.

I know the gears are short, but it's LSD honestly thats what you need buddy :goodjob:

[EvasiveEF9]

Halfwit...parts car...still got the forward crossmember? Wouldn't mind pulling my front wheels back forward to where they're supposed to be...you know...before I hit a curb with it at the age of 16...

[bigdare23]

Halfwit...parts car...still got the forward crossmember? Wouldn't mind pulling my front wheels back forward to where they're supposed to be...you know...before I hit a curb with it at the age of 16...

I looked at the front end on ebay that you was talking about. It's the wrong one. It's listed as a EF9 frontend, but its really a EF8 frontend. EF9=Civic SiR EF8=CRX SiR which are different.

[EvasiveEF9]

Which one did you look at? And I'm aware they're different. I like the EF8 front more, so I wanna put it on. I've seen it done. It'll be a bit of mix and match...

[toonz]

So you want the ef8 front on your hatch? That's interesting!

[bigdare23]

Which one did you look at? And I'm aware they're different. I like the EF8 front more, so I wanna put it on. I've seen it done. It'll be a bit of mix and match...

Should of kept your rex then LOL! it can be done (just different fenders). I wouldn't do it, cuz I like the clear bumper lens on the ef9. {I'm a ricer}

[EvasiveEF9]

Well, if I do the conversion I'll cuz you a deal on my clear front end. How does free sound, since I don't want the shit in my basement after the swap, LoL. You think the fenders are the only difference? Think it'd matter if the swap was from an 88-89 or 90-91? I don't think anything else would matter except the fenders need to be 90-91 (I hate the look of 88-89s with the little screws in the friggin corner lights...I HATE those things!)

Toonz - EXACTLY. It's not something that's ALL that frequently done...

[toonz]

Im downgrading to the B16 next month kids so go ahead and start the bashing LOL

[EvasiveEF9]

Im downgrading to the B16 next month kids so go ahead and start the bashing LOL
What DID you have again?

[toonz]

I think I went far out of my range skipping the ZC,D series vtec, and the b16 LOL I thought the GSR would have liked me but that bitch dosn't

[toonz]

A slow ass fucked up cranky ass GSR B18C1 that's always bitchy!!!!!!

[bigdare23]

u know the rex and hatch fenders are shaped differently. So if u wanted to so the conversion more than likely u gotta use the hatch fenders. Oh yeah the fenders are not different between the years. the molding is different and how your mount your corner lights (but that can be changed by replacing the slots where u screw the light down, with the 90-91 style brackets.

[bigdare23]

The b16 family welcomes u with open arms!

[toonz]

Oh yeah LOL well really im not sure because A GSR longblock is going for 1800 and a complete swap for a b16a is going for 1500 and up .... I love my torque that's the only temptation that has me leaning toward another GSR!

[DrunkScotsman]

$40 halfwit , and toonz......B16 FTMFW!!!!!!!!!!!!!!!!

[KevinT707]

B16s suck.

[EvasiveEF9]

B18's ftmf-torque-w

[bigdare23]

hey stop the b16 hate'n!!!

[bigdare23]

B16s suck.

remember your roots chump!

[EvasiveEF9]

Just got my answer back...

EF8 fronts WILL fit on the EF9 body, but it doesn't look right, and there's some mods that need to be in affect. Looks like I'll be stick to the EF9 conversion, or keeping it USDM. I'll probably stay USDM since I can't do EF8, and I don't like the EF9 nose.

Also got word that no, the CRx mirrors DO NOT fit the Civic hatch.

Which means project "USDM body-back-to-stock" will take place where I'll be ditching the Z3's, pulling dents, replacing the dented rear hatch and driver's door, trying to find a CF ZC or SiR (for usdm) hood, and will be stepping to 15" Rota Slips (or Drag DR23...same wheel) or Circuit 8's...but I think the Circuit 8's are heavier. Bondo for shaved-sides will get taken off, and side moldings will go back on.

or

Project "guts" will go into affect where I'll get the interior nice and finish it off in black. Got CRx seats (front), and CRx dash in sleek gray/black. Probably fake-leather sleek gray headliner (and sunvisors), and all black interior and black carpet will go in with new black door sills. Probably put 1 12 (removeable) in the hatch area with a cargo cover.

It'll be fun...daily driver that's nice and sporty, and I can have it ready for the track with one hour of prep time on the weekends.

Oh well, I guess...with a USDM body, I'm more likely to wanna jump it to the track for SCCA instead of keeping it on the streets. Also, I guess I'll have to hunt down a CRx shell again...someday. In the meantime, maybe I'll find a hatch shell, put the d15 in it, and sell it off...try to get some profit from it.

Getting a CRx will have to come after the two project cars I'll be working this summer, though.

Project one is a 1962 Plymouth Belvedere 4door getting built for drag. Owned by country music star Jennifer Nettles. Ditching the inline-6 in it, most likely, and going with a 318 or 383 V8, gutting the insides (floors are all rusted out) and working from the inside out.

Project two is 1972 VW Sandrail. Rebuilding the 1400cc (if I remember right) inline-four and it'll probably be built for the street...not offroading. Nothing mean. It's fun just to drive and look at, so I don't need to do anything radical with it. Sand it all down and repaint it, though. Ideas for color?

[Halfwit]

I know the gears are short, but it's LSD honestly thats what you need buddy :goodjob:
my zc is not LSD.

[bigdare23]

my zc is not LSD.

that why i posted the link. it was for a lsd zc tranny.

[bigdare23]

Just got my answer back...

EF8 fronts WILL fit on the EF9 body, but it doesn't look right, and there's some mods that need to be in affect. Looks like I'll be stick to the EF9 conversion, or keeping it USDM. I'll probably stay USDM since I can't do EF8, and I don't like the EF9 nose.

Also got word that no, the CRx mirrors DO NOT fit the Civic hatch.

Which means project "USDM body-back-to-stock" will take place where I'll be ditching the Z3's, pulling dents, replacing the dented rear hatch and driver's door, trying to find a CF ZC or SiR (for usdm) hood, and will be stepping to 15" Rota Slips (or Drag DR23...same wheel) or Circuit 8's...but I think the Circuit 8's are heavier. Bondo for shaved-sides will get taken off, and side moldings will go back on.

or

Project "guts" will go into affect where I'll get the interior nice and finish it off in black. Got CRx seats (front), and CRx dash in sleek gray/black. Probably fake-leather sleek gray headliner (and sunvisors), and all black interior and black carpet will go in with new black door sills. Probably put 1 12 (removeable) in the hatch area with a cargo cover.

It'll be fun...daily driver that's nice and sporty, and I can have it ready for the track with one hour of prep time on the weekends.

Oh well, I guess...with a USDM body, I'm more likely to wanna jump it to the track for SCCA instead of keeping it on the streets. Also, I guess I'll have to hunt down a CRx shell again...someday. In the meantime, maybe I'll find a hatch shell, put the d15 in it, and sell it off...try to get some profit from it.

Getting a CRx will have to come after the two project cars I'll be working this summer, though.

Project one is a 1962 Plymouth Belvedere 4door getting built for drag. Owned by country music star Jennifer Nettles. Ditching the inline-6 in it, most likely, and going with a 318 or 383 V8, gutting the insides (floors are all rusted out) and working from the inside out.

Project two is 1972 VW Sandrail. Rebuilding the 1400cc (if I remember right) inline-four and it'll probably be built for the street...not offroading. Nothing mean. It's fun just to drive and look at, so I don't need to do anything radical with it. Sand it all down and repaint it, though. Ideas for color?

do the damn thing!

[EvasiveEF9]

do the damn thing!
Which one? LoL

Anyone need any CRx or Civic pieces? Might be placing an order from Cali and he's got all kinds of crap if JHOT doesn't have what I'm looking for.

[bigdare23]

Which one? LoL

Anyone need any CRx or Civic pieces? Might be placing an order from Cali and he's got all kinds of crap if JHOT doesn't have what I'm looking for.

all the above!!!

[EvasiveEF9]

LoL, yeah, no doubt. Gonna be a fun-ass summer. All vacations cancelled. Well, I may still drive to DC and back...

[toonz]

$40 halfwit , and toonz......B16 FTMFW!!!!!!!!!!!!!!!!

hmmm:thinking: What's the 40 bucks for a run LOL you don't have a chance LIRL my shit smoke's it dosn't have loss of power chump :lmfao: :lmfao: :lmfao:

[toonz]

B16s suck.
:lmfao: :goodjob: :yes:

[BTLFED]

d-series my brother, its basically a 1st gen integra motor with ef motor mounts

Not really. Same concept as the D16A1, different execution. The ZC has more power than the D16A1, more aggressive cams, stronger bottom end, ETC.

And no, Halfwit does not need a ZC tranny. The gears are shorter than an A6 box, which would be kinda dumb with a turbo car.

[toonz]

that why i posted the link. it was for a lsd zc tranny.

:doh:

[BTLFED]

YEAH RIGHT, zc trannies are the worst thing to happen to a turbo d, unless u have under 140 whp. they have short gears, so all i do on mine now is spin 1-3 even rolling, on drag radials.

ZC TRANNIES SUCK unless u have a all motor d series.

im looking for a dx or an hf.

That's not exactly true either. ZC trannys are stronger than normal D series trannys, and are the only D series that use equal length drive axles with an intermediate shaft like the B series do.

[BTLFED]

Looking at folding mirrors for my civ. Will the CRx folding mirrors fit on the Civ hatch?

You have to modify them because the CRX windshield has more of a slope to it than a Civic hatch does.

[toonz]

Damn btlfed is on a roll today LOL

[BTLFED]

Damn btlfed is on a roll today LOL

I am an EF god. I know my shit.

[toonz]

osakajdmmotors FTMFW!!!!!!! GSR LongBlock with 45,437 miles on it for $1650

[EvasiveEF9]

You have to modify them because the CRX windshield has more of a slope to it than a Civic hatch does.
Totally forgot about that...


osakajdmmotors FTMFW!!!!!!! GSR LongBlock with 45,437 miles on it for $1650
Check, also, with NoyanUSA. That's who I got my LS from. East Coast supplier...

[DrunkScotsman]

btlfed , could you please give me the exact axles and place to get them , to where as i would have no issuses at all ! , thanx-

[bigdare23]

Not really. Same concept as the D16A1, different execution. The ZC has more power than the D16A1, more aggressive cams, stronger bottom end, ETC.

And no, Halfwit does not need a ZC tranny. The gears are shorter than an A6 box, which would be kinda dumb with a turbo car.

I thought that was the problem with the ZCs???

And the only reason why I suggested that tranny cuz of the LSD. Plus wasn't streetstuff making like 200hp allmotor in his d?

[BTLFED]

btlfed , could you please give me the exact axles and place to get them , to where as i would have no issuses at all ! , thanx-

Generally with B series swaps you use 90-93 Integra axles WITHOUT ABS. The ABS ring will fuck up how they spline into your hub. As far as where to get them, you should be able to get some at any parts store.

[asserwer]

88 CRX Honda in the house, just kidding, whats up all

[BTLFED]

88 CRX Honda in the house, just kidding, whats up all

And you are?

[asserwer]

how do i join

[BTLFED]

how do i join

Join what? How did you get so many negative reps with only 10 posts LOL

[EvasiveEF9]

how do i join
Donate 150$ towards club event funding. First year is 200, though.

[Halfwit]

that why i posted the link. it was for a lsd zc tranny.
but hwat im trying to get across to you is no matter if it has 8 lsds in it, the gears are WAY TOO SHORT. if i do a 60 roll, i wont spin, but ill only accelerate til "like" 72 mph....a zc will never work.

[Halfwit]

That's not exactly true either. ZC trannys are stronger than normal D series trannys, and are the only D series that use equal length drive axles with an intermediate shaft like the B series do.
whats not true? u didnt contradict anything i had said...

i didnt say they were weak.
i didnt say they didnt use equal length axls..

your weird

[Halfwit]

my old cars...RICETASTIC..... i know i know, but i was 16..i learnd better.

[EvasiveEF9]

what the hell happened to that prelude?

BTW, anyone need any EF parts? Guy that I'm talkin' to is trying to find me some parts, and says if any of ya'll need parts, he'll try to get them as well. For buying as a "package" it'll come for cheaper both shipping and the more we buy, the more he'll discount...

Let me know. I'm looking at EF9 Folding Mirrors, Rear Fogs, and Power Windows :yes:

[Halfwit]

a lady in a camry failed ot yield... she turned left when i was going str8. messed my neck up.

[EvasiveEF9]

It's always those damn female drivers...

[crx_guy]

dang havent been on in a while but, here go's....
1991 honda crx dx- 1989 honda crx dx - of warner robins
start of with the 91- since theres more work to it

Auto to manual conversion
DPFI to MPFI
JDM B16A (Sir2) Swap from Integra XSi
Close-ratio YS1 cable tranny modified with OEM EK9 helical LSD
OBD0->OBD1 conversion
Frog Engine Controls jumper harness and VTEC subharness
Crome chipped P28 ecu
Stock CRX exhaust and intake
DC header
DA integra front brakes/knuckles


89-

Auto to manual swap
D15b2 , so anything after this doesnt matter lol
89 si tranny
89 lx ecu
full exhaust
and the headlights and tailights but who cares :)

soon to have b16a sir2 swap :) the pic of the car is old no longer have wheels, riding on steelies.

[EvasiveEF9]

To anyone who's been following up on my issues with my swap...

Is it possible the ECU is from an Automatic and it's wanting to shift? Or possible I should use a p75 instead of a pr4?

[bigdare23]

88 CRX Honda in the house, just kidding, whats up all

What's up? and welcome to the EF thread!

[bigdare23]

dang havent been on in a while but, here go's....
1991 honda crx dx- 1989 honda crx dx - of warner robins
start of with the 91- since theres more work to it

Auto to manual conversion
DPFI to MPFI
JDM B16A (Sir2) Swap from Integra XSi
Close-ratio YS1 cable tranny modified with OEM EK9 helical LSD
OBD0->OBD1 conversion
Frog Engine Controls jumper harness and VTEC subharness
Crome chipped P28 ecu
Stock CRX exhaust and intake
DC header
DA integra front brakes/knuckles


89-

Auto to manual swap
D15b2 , so anything after this doesnt matter lol
89 si tranny
89 lx ecu
full exhaust
and the headlights and tailights but who cares :)

soon to have b16a sir2 swap :) the pic of the car is old no longer have wheels, riding on steelies.

two for one special going on there! :goodjob:

[DrunkScotsman]

what the hell happened to that prelude?

BTW, anyone need any EF parts? Guy that I'm talkin' to is trying to find me some parts, and says if any of ya'll need parts, he'll try to get them as well. For buying as a "package" it'll come for cheaper both shipping and the more we buy, the more he'll discount...

Let me know. I'm looking at EF9 Folding Mirrors, Rear Fogs, and Power Windows :yes: i need the filler part btween the bumper and hood , gold if i can or black , lmk! good lookin out , halfwit , come get that tranny $30!

[Halfwit]

pm sent^

that prelude was d-shiznit...240 was "teh fastness" now hte crx is faster, looks hella better. buahahahaha.

[Halfwit]

the second meet was at the V when Halfwit drove his EK hatch if im correct? Yeah D I was there lol
BUAHAHAH IT ALL REVOLVES AROUND ME , even when i dont drive an ef.. bauahahahaha.

lol meets will be labled as

"when halfwit was there"

" the one halfwit didnt go to"

"the one where halfwit pwntd us"

[bigdare23]

BUAHAHAH IT ALL REVOLVES AROUND ME , even when i dont drive an ef.. bauahahahaha.

lol meets will be labled as

"when emo was there"

" the one emo didnt go to"

"the one where emo pwntd us"



if you want the meets to be label like that.

[Halfwit]

if you want the meets to be label like that.
editing posts is like so last tuesday.

dont hate.

[EvasiveEF9]

editing posts is like so last tuesday.

dont hate.
Were you a cheerleader in a past life?

:taun:

[Halfwit]

Were you a cheerleader in a past life?

:taun:
yep, but thats ok , cause u were a ford escort in a past life :gay: :taun:

[EvasiveEF9]

yep, but thats ok , cause u were a ford escort in a past life :gay: :taun:
That's ok, you were toonz in a past life. :tongue1:

[Halfwit]

That's ok, you were toonz in a past life. :tongue1:
oh no!!! i was a hater? shit i feel bad now...


lol i saw a thread on honda tech, lots of pics of "dax's" honda beat. its amazing.

[EvasiveEF9]

Yeah, I saw the beat, too, but only two shots. Neither were that great...got a link?

And yes...you were a hater. It crushed my ego and stuff, and so now I pick on kids, take lollipops from infants, and take lunch money from middle schoolers. I don't mess with highschoolers, they might actually be a challenge. That's why I'm at NGCSU...they teach me battle tactics, and how to sneak up on people and kill and stuff...then I'll feel confindent enough to take out mothers and senior citizens!

[Halfwit]

limk to honda beat = http://www.honda-tech.com/zerothread/1892536

[EvasiveEF9]

Dude, that is badass! I want one!

[bigdare23]

This is a JDM partlist of all the stuff I can get as of Monday. If you are interested PM with and I will give you my source! :goodjob: {Also, this stuff will be gone quick so if you want something you got to jump on it asap!

ItemNumber--CarStockNumber--Make--Model--Chassis--Category--Notes

22178--11035--Honda--CR-X delsol--EG2-Engine & Transmission Set--B16A A/T
22327--10989--Honda--CR-X--EF6--A/C Controller--w/relay, auto
22328--10989--Honda--CR-X--EF6--Interior Clock
22329--10989--Honda--CR-X--EF6--Corner Lights
22330--10989--Honda--CR-X--EF6--Power Window Unit
22331--10989--Honda--CR-X--EF6--Fenders
22332--10989--Honda--CR-X--EF6--Front Bumper-w/frame
22333--10989--Honda--CR-X--EF6--Front Seats-damaged
22334--10989--Honda--CR-X--EF6--Headlights
22335--10989--Honda--CR-X--EF6--Hood
22336--10989--Honda--CR-X--EF6--Power Folding Mirrors--w/switch and relay {mines HaHaHa}
22337--10989--Honda--CR-X--EF6--Rain/ Wind Guards
22338--10989--Honda--CR-X--EF6--Rear Bumper-w/frame
22339--10989--Honda--CR-X--EF6--Rear Seat Conversion--damaged
22340--10989--Honda--CR-X--EF6--Side Skirts
22341--10989--Honda--CR-X--EF6--Steering Wheel
22342--10989--Honda--CR-X--EF6--Tail Lights--w/rear garnish

All of these parts are coming off of a 1990 Honda CR-X 1.5x (EF6) (except the engine). I "believe" that car would have the facelift frontend (a.k.a SiR frontend). So you can the get the whole frontend conversion for cheap!!! If you are interested PM me!

[bigdare23]

Here are a list of engines!!! (some might be sold by now)

21677--Prelude--BA8--Engine & Transmission Set--F22B M/T
21667--Integra--DC2--Engine & Transmission Set--B18C M/T Type R (LSD)
21666--Integra--DC2--Engine & Transmission Set--B18C M/Type R (LSD)
21663--Civic--EF9--Engine & Transmission Set--B16A M/T (LSD) {Drunk's motor}
21669--Civic--EG4--Engine & Transmission Set--D15B M/T
21664--Civic--EG6--Engine & Transmission Set--B16A M/T
21661--Civic--EG6--Engine & Transmission Set--B16A M/T (LSD)
21662--Civic--EK4--Engine & Transmission Set--B16A A/T
21665--Civic--EK9--Engine & Transmission Set--B16B M/T Type R (LSD)

[EvasiveEF9]

*sigh* no hatchback love...

[bigdare23]

*sigh* no hatchback love...

call them!

[DrunkScotsman]

evasive , you read my post on here? the one about the filler piece?

[EvasiveEF9]

Yup, got it read. I'll be taking it, but I can't do anything til this weekend. That and I think Halfwit said he had one, didn't he?

[EvasiveEF9]

Female friend of mine just wrecked her DA. Anyone want to do a brake upgrade, or anything like that? I might have all the parts I need to get mine running right afterall, LoL. If anyone wants any DA parts, let me know...I may buy the car from her and part it out...

[DrunkScotsman]

i could use the upgrade , lmk a price!

[EvasiveEF9]

First let me make sure I'm getting it and stuff...who knows, I may go hunting for another shell and build the fuck out of it. Then I'll have two beasts. The teggy's got the ECU, motor, trans, axles, and brakes all around. Apparently the car's still driveable, just pretty damn fucked up.

As stated, I may just build me another CRx or civic...I don't know yet...we'll see soon!

[BTLFED]

whats not true? u didnt contradict anything i had said...

i didnt say they were weak.
i didnt say they didnt use equal length axls..

your weird

Nevermind. You obviously missed my point.

[DrunkScotsman]

Cory!!!!!! let me see pics of your new wheels!!!!!!! you got plans for this weekend?

[BTLFED]

To anyone who's been following up on my issues with my swap...

Is it possible the ECU is from an Automatic and it's wanting to shift? Or possible I should use a p75 instead of a pr4?

If it is an automatic ECU it won't do shit as far as it running crappy. It will just throw a check engine light for the automatic transmission lockup solenoid.

[BTLFED]

BUAHAHAH IT ALL REVOLVES AROUND ME , even when i dont drive an ef.. bauahahahaha.

lol meets will be labled as

"when halfwit was there"

" the one halfwit didnt go to"

"the one where halfwit pwntd us"

Now you are starting to sound like Kevin. Don't be that guy. :slap:

[EvasiveEF9]

If it is an automatic ECU it won't do shit as far as it running crappy. It will just throw a check engine light for the automatic transmission lockup solenoid.
Pretty sure it's stick. Only quest is is it 90-91 or 92-93 (OBD1 vs 0)

We'll see. Either way, it's like I've got a complete build for another crx or civic, LoL. Most likely, I'll part out the car and get rims, body work and paint done to mine...either that or rims and interior, and get the front pulled (finally...after all this time, LoL) I may try just getting that trac-bar first, though...see if that'll do me...

I'll most likely be selling off the wheels, F/R brakes, and MC/Booster/Prop, and I may keep the engine. Tranny...don't know yet... ECU...keep if it's good and it'll make my car run like it's supposed to...otherwise sell it off.

[EvasiveEF9]

Boo...it's an auto. Tranny and ECU to be sold off. Oh well, still got axles, motor (for parts or build) with 140K on it (probably for build :) ) out of a 1993.

[BTLFED]

I need the prop valve for the brakes!

[DrunkScotsman]

sup B-RAD!

[EvasiveEF9]

Car's is mine...I got a shit ton of stuff, but I'm not gonna list a for-sale thread, cuz I can't til I get pics...but...here's what I know she's got...

(I'm keeping the motor...)
LS Automatic Transmission (93, no slips)
LS PR4 Automatic ECU (93)
All glass
Doors (2dr model)
Tail lights
Trunk lid
Wheels (they're aftermarket...that's all I know about them as of right now)
All interior, decent condition (that's all I know right now)
-including seats (front and rear)
-including center console
-Steering wheel with airbag
-Gauge cluster
-rear panels
--what else is there?
Radiator
Power Steering (lord knows I won't use it)

Now the shit you wanted to hear:
LS rear discs
LS Front discs
Ebrake cables
Prop (I assume it's 4040...won't know til I get it, but I'm certain it's 4040 or 4035)
Booster
MC

MIGHT SELL:
B18 motor (not sure if it's the A1 or B1 or B, yet)
LS Axles/halfshaft (I can do a napa exchange for good axles)

I'll see what else is good when I get her in...

[EvasiveEF9]

...and I'll be getting her in this weekend.

[DrunkScotsman]

i need those axles to finish my swap! , lmk a price!

[EvasiveEF9]

See if you can get cores...if you can't I'll probably hand them over to you for like...50$ for the pair, halfshaft for another 25$.

[BTLFED]

Prop (I assume it's 4040...won't know til I get it, but I'm certain it's 4040 or 4035)

PRICE DAMNIT!!!

[EvasiveEF9]

PRICE DAMNIT!!!
Be nice to my sister, don't take her home, and 30$ sound good?

Don't you wanna see if it's 4040 or 4035, first?

[BTLFED]

Be nice to my sister, don't take her home, and 30$ sound good?

Don't you wanna see if it's 4040 or 4035, first?

Be nice to your sister :yes:

I don't give a fuck what the ratio is. It is a prop valve for 4 wheel discs, which is what I need. My disc/drum prop valve isn't going to work worth a damn with 4 wheel discs lol

[EvasiveEF9]

Be nice to your sister :yes:

I don't give a fuck what the ratio is. It is a prop valve for 4 wheel discs, which is what I need. My disc/drum prop valve isn't going to work worth a damn with 4 wheel discs lol
Well, this is what I've learned. If you're going just as daily driver, or whatever...either one is fine. For Integra brakes all around you want 4040. If you plan to keep stock fronts, go with the 4035.

However, I had rear discs, and stock fronts on the stock MC and Booster with the 4040, and didn't have a problem even during heavy driving. OCCASIONALLY the back would get a little loose. Then again, I had blown struts on the front during that time...

I don't know. If you're not doing uber-speed performance, either one is fine. But I'd prefer to give you the heads up and share the info I know then to scam you. ;) It's just how an EF-driver does business.

[Halfwit]

Now you are starting to sound like Kevin. Don't be that guy. :slap:
oh sorry........master.....

[EvasiveEF9]

Wow...no one's posting tonight about ANYTHING...

[Halfwit]

i know, its weird...

[EvasiveEF9]

I'm looking for a steering wheel and mirrors. What're you doin'?

[Halfwit]

thinkin of ways to try to get my shit done. i put off paintin it last weekend for some reason...gonna focus next week on gettin it to the shop..pickin up tranny sunday.

all else is done so

finish paint
find a way to get it to shop
wait on parts ect...

[EvasiveEF9]

I've got a tow strap :)

No, but I DO have access to a fullsize pickup. UHAUL Trailer say what?

I'm also looking at parts...is the B-series in EF SUPPOSED to have a frount mount? I'd always heard no...I never used one...and I don't see how one COULD be used...

[Halfwit]

I've got a tow strap :)

No, but I DO have access to a fullsize pickup. UHAUL Trailer say what?

I'm also looking at parts...is the B-series in EF SUPPOSED to have a frount mount? I'd always heard no...I never used one...and I don't see how one COULD be used...
well i have access to a f150, but i would have to buy a hitch ect for it...and on u hauls site they said "thy dont rent car dollys for that vehicle" not for an f150 wtf?

for an ef front mount, u cut out front bumper support (weight reduction ftw)

ask slow hatch, he has a ls turbo..but that is how mine fits...

[EvasiveEF9]

well i have access to a f150, but i would have to buy a hitch ect for it...and on u hauls site they said "thy dont rent car dollys for that vehicle" not for an f150 wtf?

for an ef front mount, u cut out front bumper support (weight reduction ftw)

ask slow hatch, he has a ls turbo..but that is how mine fits...
I was wondering about an intercooler in the front. Doesn't that KILL safety standards, though?

For uhaul's site, fuck the site, just put in ANY truck that it takes to get it to accept.

I've got balls (lol) and the slide in universal hitch with like a 2" drop or lift, and a 1.5" drop or lift (if I remember them right). I used to be a landscaper, so I've got a couple balls and like two hitches.

[Halfwit]

I was wondering about an intercooler in the front. Doesn't that KILL safety standards, though?

For uhaul's site, fuck the site, just put in ANY truck that it takes to get it to accept.

I've got balls (lol) and the slide in universal hitch with like a 2" drop or lift, and a 1.5" drop or lift (if I remember them right). I used to be a landscaper, so I've got a couple balls and like two hitches.
safety standards? ITS AN EF. no matter what if it gets a good front end collision, bumper support or not its done.

im gonna go by a u haul place and see what they say and how much their hitches and dolleys are.

[EvasiveEF9]

Sounds good...

Yeah...pretty much you drive an EF you're signing a will...

[Halfwit]

my plan....if it gets wreked....get motor out as fast as i can b4 insurance takes it. lol

throw together a dual cam zc head on a d15 block, integra alternator....zip tie that bitch together. give it to insurance company like :D :yes: :taun:

[EvasiveEF9]

Give them a dual cam ZC head? Are they shitty or something?

Got pictures of the Belvedere that we're gonna be building this summer, and tomorrow I'll have pictures of the integra I'm parting out...

I got lucky. Integra girl had minimal coverage, LoL. She was like "I'm getting X amount for it". I was like "Let me have the engine out of it, and I'll sell the good parts off of it, and get you more. Let the wrecker come and take what I leave behind"

Man, when the tow truck gets there, there ain't gonna be SHIT left! LoL

[toonz]

Wow...no one's posting tonight about ANYTHING...
Damn do any of you dudes have girls :lmfao: It was Valentines day LOL national cake day for us guys :lmfao: :yes: ...... you were suppose to go out and buy candy, flowers, etc, etc, etc for your girl LOL or am I the only one in the EF click that does that kind of stuff:lmfao:

[toonz]

Thank God it's over!

[bigdare23]

I've got a tow strap :)

No, but I DO have access to a fullsize pickup. UHAUL Trailer say what?

I'm also looking at parts...is the B-series in EF SUPPOSED to have a frount mount? I'd always heard no...I never used one...and I don't see how one COULD be used...

I'm not using one on my swap, but it can be donw with some (a whole lotta work). My boy who did my swap has a front mount hehehe. He didnt want to buy aftermarket motor mounts so he chopped out DA mounts installed polyurathane (I can spell for shit) bushing in them and welded them on his hatch. That motor doesnt move in this engine bay!

[toonz]

oh no!!! i was a hater? shit i feel bad now...


lol i saw a thread on honda tech, lots of pics of "dax's" honda beat. its amazing.
I don't hate on you Halfwit :tongue1: if you thought I was hating on you I was just playing LOL I like your car seriously:lmfao:

[bigdare23]

Damn do any of you dudes have girls :lmfao: It was Valentines day LOL national cake day for us guys :lmfao: :yes: ...... you were suppose to go out and buy candy, flowers, etc, etc, etc for your girl LOL or am I the only one in the EF click that does that kind of stuff:lmfao:
so basically this is how your day went huh?

:phone: :burnout: :hot: :2cents: :hitit: :leghump: :love: :bootyshak :flash: :hump: :lickpuss: :ky: :idb: :nautjerk: :jerkit: :piss: :boobies: :super:

[toonz]

LOL^ something like that LOL

[toonz]

I am an EF god. I know my shit.
:eek: A New title:lmfao:

[EvasiveEF9]

Damn do any of you dudes have girls :lmfao: It was Valentines day LOL national cake day for us guys :lmfao: :yes: ...... you were suppose to go out and buy candy, flowers, etc, etc, etc for your girl LOL or am I the only one in the EF click that does that kind of stuff:lmfao:
My girl of two years left me back in september. I was saving for a ring (which is where all the money came for the swap).

She never informed me...but she was looking for another guy for the last like 2 months. Oh well...she went out and caught something :yes:

In addition, you may have missed that I'm in a military academy. I wasn't really allowed to go out last night after 7pm...

To summarize...I get mine without having to spend money on that bullshit.

Baller status.


:eek: A New title:lmfao:

Fuck! There goes the neighborhood...

[Halfwit]

blah.

[bigdare23]

Hahahah


Hey joker are their females at your school?

[Halfwit]

uhoh...JOKER your answer determines whether d goes to military avcademy or not..lol

[EvasiveEF9]

Nope. If you come here you have to love the penis...

Nah, JK.

I've heard two numbers. One was 60% female, the other was 6:1 girl/guy ratio.

[Halfwit]

if it was 6:1 girl/guy U WOULD NOTICE. for every 100 ppl , there would be like 17 guys to 83 girls....

[EvasiveEF9]

Well, it's hard to keep up. ALOT of students are commuters. I don't know actual numbers, but I think like half population is commuter. About 30% is corps that live on campus (plus a few commuters) and anoter 25-35% are female dorms.

These aren't exact, so don't take my word...but look at it this way. Most of the population that is male is in the corps, and the corps makes up about 30% of the population.

[Halfwit]

so what are you? campus? how leniant are they on what u do or is it like college? cant be out past 7? thats weird...tell me.. im curious

[EvasiveEF9]

Well, it all depends on your status. Are you male and living on campus, or off campus. (if you're male and living on campus you HAVE to be in the corps). The only way you can be male and NOT be in the corps is to live inside the 50mile radius.

The main SUCK is that it's a dry county. They sell beer, but no liquor unless you're at a bar. Alcohol's not allowed on campus so any parties take place OFF campus.

My advice is if you're looking to attend here and you don't plan to go military...be a commuter.

[Halfwit]

Well, it all depends on your status. Are you male and living on campus, or off campus. (if you're male and living on campus you HAVE to be in the corps). The only way you can be male and NOT be in the corps is to live inside the 50mile radius.

The main SUCK is that it's a dry county. They sell beer, but no liquor unless you're at a bar. Alcohol's not allowed on campus so any parties take place OFF campus.

My advice is if you're looking to attend here and you don't plan to go military...be a commuter.
no i have no want to go to a military academy, i was jsut wandering what u did..

[Halfwit]

is to day gonna be the day this thread hits 100 pages? i think so, and 2000 posts

[EvasiveEF9]

Oh...and I'm second semester freshman in the corps. I carry the rank of c/pvt. There's alot of comradery. Everyone in the corps is your friend (mostly). I deal with alot of military bullshit like CIP (which was this last weekend, which ws why I was late saturday) where the corps spends about a week cleaning every square cm of their room for a detailed inspection once a semester. We get un-detailed inspection twice a week (tues/thurs) for our uniforms and rooms (which are 15x15). MWF we do PT for an hour (running 20minutes up and down hills, and whatever other shit they feel like making us do). Communal showers and bathrooms or "latrines". Everything must be kept clean and orderly in the barracks at all times. We also have what's called and FTX once a semester. Basically, they throw us in the woods with our military gear, and we spend a night (fall semester) or a weekend (spring semester) in the woods. It's cold; we eat MRE's (military thing. "Meal Ready to Eat") We do drill every monday where we learn military tactics and learn to march and how to use M16's (I can fully disassemble, reassemble and do a functions check in 1:30, roughly) we have an on-campus shooting range, rifle time, drill team, and other various specialty teams like columbo who rappel, and for a show they rappelled off a 3story building here on campus, and learn survival skills. Aggressors learn to rush and attack without ever being seen, and survival skills.

If you're in the corps and not enlisted, or commissioned, you get 750$/semester, plus about 250$/semester for uniform money.

It's not all bad, despite some of the bullshit that occurs. It's something to be proud of, people look up to the uniform...its' got me outta two tickets, already. It's highly looked upon for resumees, we get to play with guns on campus (not something you get elsewhere!) the scenery is gorgeous, keeps you in shape, and well disciplined, the tuition is cheap, and if you'r ein the corps, you get to ride in a helicopter through the mountains once or twice. We have alot of traditions which also make it pretty cool. Again...it's something to be proud of, and alot of it's pretty cool.

And...I can iron the shit out of anything, LoL. I can make a shirt stand up on it's own if you want me to, LoL. Hey...ladies love it.

[Halfwit]

what are hte time restrictions though? do u have to be there every day? or are weeknds urs to do/ go where u please?

[EvasiveEF9]

Well, it depends...

Females have to be in by 2 Sun-Thurs, but there's no punishment if they don't come home at night.

Corps is split. Commuters in the corps just have to be here at 645am (sun-thurs) to report in for formation. Then they can leave after duty is pulled (usually done by 8am)

Resident in the corps NOT on quarters has a midnight curfew.
Resident in the corps ON quarters has a 7pm curfew.

You are on quarters if you mess up your grades. I had a bad semester, so I'm still on quarters.

I think that covers everything...LoL

[Halfwit]

so u HAVE to be there at 7pm sun- sat? better get those grades up....i know that the payoff come s later, but damn that must suck now.

[EvasiveEF9]

Agreed...and it DOES suck. I'm in a 15x15 cell. I can't go out to eat, even. It sucks. Stone walls, tile floors...I fuckin' hate it. But...I do need the grades...

[EvasiveEF9]

Speaking of 2000 posts...check my post count, too. I gotta stop posting. I'll get the 2000th post of the thread on my 2000th post :)

[Halfwit]

wait, so after ur classes and stuff u cant leave if its b4 7? thats only on quarters though right? seems like u would never get todrive your car....do u have a place to work on car?

[EvasiveEF9]

Not really a place here to work on the car...
Some weekends are closed where we can't leave for misc. military crap...

You can do whatever you want between classes before 7. But once 7 hits, you gotta be in the room...

[Halfwit]

whatever u want? u jsut said u cant leave the place..lol

[Halfwit]

OMG!! only 1 more week and ill be free of my full time job, and only have my part time job!!woot..

mucho trabajo con mi coche FTW!!

[EvasiveEF9]

No no...before 7, we can do whatever we want. After seven we're locked down...

[Halfwit]

No no...before 7, we can do whatever we want. After seven we're locked down...
oh ok... thats no so bad..unless classes end at 6:45..lol

[EvasiveEF9]

LoL, we DO get to pick our own schedules and classes.

[Halfwit]

well no matter how bad it gets, at least u have an ef.......

[EvasiveEF9]

Yup...soon to be an EF with my choice of D15, B18, or B18. :) Yes...2 b18's, LoL.

I'm gonna start stripping the car this weekend, so claim your parts. Axles and prop valve have already been claimed...

I can't wait to get building on these things...

Oh, here's some shots of the Belvedere:
http://photos-769.ak.facebook.com/ip002/v64/57/96/51102816/n51102816_30594769_1554.jpg
http://photos-770.ak.facebook.com/ip002/v64/57/96/51102816/n51102816_30594770_1894.jpg
http://photos-771.ak.facebook.com/ip002/v64/57/96/51102816/n51102816_30594771_2181.jpg
http://photos-773.ak.facebook.com/ip002/v64/57/96/51102816/n51102816_30594773_2825.jpg
http://photos-775.ak.facebook.com/ip002/v64/57/96/51102816/n51102816_30594775_3417.jpg
http://photos-776.ak.facebook.com/ip002/v64/57/96/51102816/n51102816_30594776_3723.jpg
http://photos-780.ak.facebook.com/ip002/v64/57/96/51102816/n51102816_30594780_4933.jpg
http://photos-782.ak.facebook.com/ip002/v64/57/96/51102816/n51102816_30594782_5497.jpg

[Halfwit]

someone rly "floored" that gas pedal..lol

[Halfwit]

why are u stripping car? u man all interior/ suspension/ motor? and your atlking about integra right.?

[EvasiveEF9]

Yeah...LoL. The whole floor is probably just going to get cut out and we're going to give it a whole new floor. The actual chassis itself looks to be alright, though, but won't know til we get the body off.

[EvasiveEF9]

why are u stripping car? u man all interior/ suspension/ motor? and your atlking about integra right.?
Correct.

1993 Integra RS (I think RS) 2dr, 4spd auto. Exterior black in color, haven't seen inside. She ran it into the back of a trailer. Car is fine, just messed up front end (hood, bumper, lights, and fenders, too, I think) car is still driveable, but the estimate in damage is about 1800$, so she said fuck it. 140K miles on it. Told her I could probably get her back more than what the salvage yard offered, so I'm parting it out for her unless someone wants the whole thing...

[Halfwit]

Correct.

1993 Integra RS (I think RS) 2dr, 4spd auto. Exterior black in color, haven't seen inside. She ran it into the back of a trailer. Car is fine, just messed up front end (hood, bumper, lights, and fenders, too, I think) car is still driveable, but the estimate in damage is about 1800$, so she said fuck it. 140K miles on it. Told her I could probably get her back more than what the salvage yard offered, so I'm parting it out for her unless someone wants the whole thing...
if there is rear interior carpet, from the trunk, or like the trunk "board" that goes over spare tire i would like that...dibs and price..

[EvasiveEF9]

For you my friend...and simply cuz I don't think I could sell off the carpet and board...it'll be free. I was gonna just throw it out when the car goes, but if you want it, it's yours.

[Halfwit]

i do i need it for my ek (ill make it fit..lol) it has nothing so i need a board that has carpet to coverthe spare tire well. appreciate it.

[Halfwit]

Currently Active Users Viewing This Thread: 3 (3 members and 0 guests)
Halfwit, EvasiveEF9, bigdare23

BIG D in tha house.


we gettin close to 100 pages too.

[EvasiveEF9]

I know...I'm dragging ass cuz I wanna be on the 100th page, LoL. Not goin' anywhere til I get it...

But yeah, the carpet and wood is yours.

[Halfwit]

goin to second job, holler. guess ill miss the 100th page..tear

[EvasiveEF9]

SUCKER! If ONLY you didn't have that job right NOW...

[EvasiveEF9]

The ULTIMATE ownage for cats. Your pictures don't mean shit...

http://video.google.com/videoplay?docid=4412027748204910365

[mySLOrex]

mySLOrex- 1988 CRX si- man. d15b swap. full bolt ons. nos waiting to be tuned. buford GA

[EvasiveEF9]

Dyno'd?

PAGE 100 FTMFW!

[Halfwit]

page 100!!! woot..now back to work..lol

[toonz]

Im here bitches!!!!

[toonz]

. I was saving for a ring (which is where all the My girl of two years left me back in septembermoney came for the swap).

She never informed me...but she was looking for another guy for the last like 2 months. Oh well...she went out and caught something :yes:

In addition, you may have missed that I'm in a military academy. I wasn't really allowed to go out last night after 7pm...

To summarize...I get mine without having to spend money on that bullshit.

Baller status.



Fuck! There goes the neighborhood...

Sad to hear man ............ just find a girl you can be good friends with!!!!!!

[EvasiveEF9]

Sad to hear man ............ just find a girl you can be good friends with!!!!!!
I'm fine with the split, I got an engine, and she caught something :goodjob:

As for a girl to just be friends with...was workin' on that, man, but the girl I"m with no is like "all or nothing". And damnit, I don't wanna lose her completely, but I'm not NEAR ready to have any tie-downs. I hate saying it...but I may have to cut my losses...

[slow_hatch]

I'm here fellas :goodjob: So whats new with the EFsquad??

[uproot]

well one thing that's new is that i gotta work on saturday :(

dont think i can make the meet

[bigdare23]

Damn 100 pages ef ftmfw!

[EvasiveEF9]

Whoa....wait, is there a meet this saturday?

And the only thing new is we hit 100 pages. And I posted pictures of project Jnett (the 62 belvedere) one page ago, and I also posted that I got a 93 LS that I'll be parting out. Want brake upgrades? :goodjob:

[uproot]

maybe there's not a meet... i thought there was lol

[toonz]

Damn uproot your late as hell LOL hahahahahahahahah LIRL

[uproot]

hahaha ah man... yeah, that's freakin hilarious

[bigdare23]

well one thing that's new is that i gotta work on saturday :(

dont think i can make the meet

Saturdays ftl!

[toonz]

JokertypeR is that true or is that your way to escape your true thoughts about her................

[toonz]

hahaha ah man... yeah, that's freakin hilarious
:lmfao: :lmfao: :lmfao: :lmfao: :lmfao: it's just too funny:lmfao: :lmfao: :lmfao: :lmfao: :lmfao:

[uproot]

so then... when is there gonna be another meet?

[EvasiveEF9]

JokertypeR is that true or is that your way to escape your true thoughts about her................
Which part?

[toonz]

nevermind^

[toonz]

so then... when is there gonna be another meet?
I think the EF president :lmfao: is aiming for mid-April. Really I have no clue just ask D he's around here somewhere!