EF Squad's WhoresLounge

[bigdare23]

Ya think so?

Yep part out the whole (except the dizzy) and your good guy!!! :goodjob:

[EvasiveEF9]

...still need my damn fender!

Dare, got your message. I can get one from the shop for 50$ new (made by AutoPower). Just hoping to find one a little cheaper. And those damn mouldings are impossible to find...

[Halfwit]

i know a person selling a driverside ef for 40$.... i need passenger though

if u need it ill talk to him and bring it to the meet if u decide.

[EvasiveEF9]

Please do. Hopefully sooner than the EF meet. I'm willing to drive...

Let me know if he comes down on price. I can get a NEW one for about 50$. Was hoping to find one for like 20-30$. Hard to find, but I'm in hopes. But if I'm gonna pay more than that, I want DENTLESS.

I know...I'm picky. Told you...I can get you a new one (pass) for 50, as well.

[Halfwit]

i tried to fuck him down on price, hes not having my negotiations... he said it was certifit that he never used.

do u have paypal?

[EvasiveEF9]

Yes, I do...why?

[uproot]

Everybody Check out the poll in the EF SQUAD forum

[toonz]

just popping up.............

[EvasiveEF9]

I bet you do that when you walk past little boys at the movie theatre, too, don't you...

[EvasiveEF9]

Well, I'm getting in bed rather quickly before the dryer buzzes. If it buzzes before I get to bed, I'll feel like I should be folding them before I go to bed so they don't wrinkle.

Laziness for the W.

[bigdare23]

n/a d-series guys you serious need to check out this header forsale!

http://www.importatlanta.com/forums/showthread.php?t=123798

[EvasiveEF9]

Hmm...I was looking to go straight D15B from JHOT...

[Papa_Smurf]

thats a wild lookin header, but i love my a/c too much :).

Just yesterday we were putting in my dads new Edelbrock header on his b16, and that thing is a bitch to put in if you have a/c.

[bigdare23]

thats a wild lookin header, but i love my a/c too much :).

Just yesterday we were putting in my dads new Edelbrock header on his b16, and that thing is a bitch to put in if you have a/c.

hahahaha tell your pops a/c is for d-series LOL


Really, that header will put you at the top of the d-series dyno power list (I promise)!!! That's the best header ever made!!!

[cornercarver78]

Hi guys.. I sold my ls Eg and got this 91 si a few weeks ago. I've had a couple of crx's before but this is my first 88-91 hatch. See ya at the meet :goodjob:


http://i194.photobucket.com/albums/z75/cornercarver78/100_1661.jpg

[bigdare23]

Hi guys.. I sold my ls Eg and got this 91 si a few weeks ago. I've had a couple of crx's before but this is my first 88-91 hatch. See ya at the meet :goodjob:


http://i194.photobucket.com/albums/z75/cornercarver78/100_1661.jpg

nice and smart move! {eg's arent nothing but trouble LOL} :goodjob:

[EvasiveEF9]

Hatches are THE way to go. Anyone that owns one or HAS owned one will tell you so...

Welcome to the squad. If you plan to swap motors...I got one for ya...

Dare, I'd love to...that's just a LOT of cash...

[bigdare23]

Hatches are THE way to go. Anyone that owns one or HAS owned one will tell you so...

Welcome to the squad. If you plan to swap motors...I got one for ya...

Dare, I'd love to...that's just a LOT of cash...


Only if your talking about the hatches with the slate backs..........................

[EvasiveEF9]

Negative. How many times have you put an engine in your back, and a full cherry picker beside you...all without taking out your seats, or removing your hatch, and still closed it?

Or hauled a full attic insulation blower in the back and still closed it?

Yeah...thought so...

[bigdare23]

Negative. How many times have you put an engine in your back, and a full cherry picker beside you...all without taking out your seats, or removing your hatch, and still closed it?

Or hauled a full attic insulation blower in the back and still closed it?

Yeah...thought so...


I cant help it that it got a fat ass


Wagon>>>>Hatch

LOL :lmfao:

[EvasiveEF9]

I cant help it that it got a fat ass


Wagon>>>>Hatch

LOL :lmfao:
Hey, I never claimed ANYTHING for wagons. Just said a HATCH was the way to go...they're cosmetically better looking.

[bigdare23]

Hey, I never claimed ANYTHING for wagons. Just said a HATCH was the way to go...they're cosmetically better looking.

I'm just fucken around since this is our Post Whore thread now! :goodjob:

[EvasiveEF9]

I'm just fucken around since this is our Post Whore thread now! :goodjob:
I think tonight you and I have whored just about every thread in the EF section...

Anyways, I'm out. I gotta go for some training to get my fatass back in shape like it was when I was in the corps.

[bigdare23]

I think tonight you and I have whored just about every thread in the EF section...

Anyways, I'm out. I gotta go for some training to get my fatass back in shape like it was when I was in the corps.


I was thinking the same thing since we were bounce from thread to thread LOL

[Papa_Smurf]

hmmm....

so who all has had to cut into the cross member to get the headers to fit on their b16?

[EvasiveEF9]

hmmm....

so who all has had to cut into the cross member to get the headers to fit on their b16?
I've heard about that with the b16...haven't had any issues with my b18, though...I wouldn't imagine they'd be THAT different...it's close, but didn't have to cut.

[Papa_Smurf]

yea, well we defiantly had to cut the cross member with the JG headers. It's also rubbing on the oil pan just a little bit, but we plan to fix that tomorrow.

[EvasiveEF9]

yea, well we defiantly had to cut the cross member with the JG headers. It's also rubbing on the oil pan just a little bit, but we plan to fix that tomorrow.
Duct tape.

[Papa_Smurf]

lol i'd rather make the clearence some how, not just duct tape it.

[EvasiveEF9]

lol i'd rather make the clearence some how, not just duct tape it.
Have you tried bending the pipe a little bit?

[GsrCrx]

yo i have a fully built engine on my 91 si, but it aint running right, anybody knows a good mechanic that can come to my garage and fix it? its a weird problem so he has to know alot about efs and turbos, lol

[Papa_Smurf]

Have you tried bending the pipe a little bit?

That's what we're going to do tomorrow :goodjob:. He's trying to get it ready for the meet.

[toonz]

Damn this thread is dead!

[bigdare23]

hmmm....

so who all has had to cut into the cross member to get the headers to fit on their b16?

not I (and I have a 1 piece header)

just beat it down a lil bit :goodjob:

[bigdare23]

yo i have a fully built engine on my 91 si, but it aint running right, anybody knows a good mechanic that can come to my garage and fix it? its a weird problem so he has to know alot about efs and turbos, lol


What kind of problem? And is it throwing any codes?

[EvasiveEF9]

yo i have a fully built engine on my 91 si, but it aint running right, anybody knows a good mechanic that can come to my garage and fix it? its a weird problem so he has to know alot about efs and turbos, lol
Mainstream. That's the ONLY thing I'm allowed to say...

not I (and I have a 1 piece header)

just beat it down a lil bit :goodjob:
LoL...beat it... Hey, guys...he said "beat it"

[jfrolang]

This thread needs some action!

[Papa_Smurf]

^ thats impossible.

[uproot]

action = http://www.adiumxtras.com/images/pictures/chuck_norris_random_fact_generator_6_3957_2224_ima ge_2578.jpg

[bigdare23]

yeah it's dead in here..........

[toonz]

Damn! What's up? The Sky, LOL

[toonz]

Man us EF'ers really get shit done around this Bitch, LOL, I'm proud of you all!

[toonz]

Im going to get off my ass and fix my crx soon, LOL, maybe she fucks up because she wants me to stay here in Atlanta 24/7, LOL

[bigdare23]

Toonz
Number 1, pick up your damn phone!
Number 2, get your lazy ass up and fix your car.
Number 3, tell my baby (you mama) I'll be over there soon with the childsupport I owe her for you hahahahahahahah.

[EvasiveEF9]

LoL...damn clownz (no...really, did I get it right, this time? LoL)

Yeah...going to see "Knocked up" tonight.

Catch ya'll on the flip.

[GsrCrx]

yo what up man, well i used to have a zc turbo on the hatch but i blew it, so we swapped a built mine me on the car, but when it starts it idles fine, but as soon as i press the gas it dies, so im thinking it has to be vacums or a electrical problem, but its throwing code 5 6 13 and 20, had a couple of guys take a look at it but they cant figure it out, thanks.......

[EvasiveEF9]

...are you the dude that called me?

[bigdare23]

LoL...damn clownz (no...really, did I get it right, this time? LoL)

Yeah...going to see "Knocked up" tonight.

Catch ya'll on the flip.


"Ya'll some damn clowns" is better but close enough :goodjob:

[bigdare23]

yo what up man, well i used to have a zc turbo on the hatch but i blew it, so we swapped a built mine me on the car, but when it starts it idles fine, but as soon as i press the gas it dies, so im thinking it has to be vacums or a electrical problem, but its throwing code 5 6 13 and 20, had a couple of guys take a look at it but they cant figure it out, thanks.......


Yeah your dude with the turbo rover motor that had his friend dyno at the last dyno meet.


{what you did with that motor?}

[bigdare23]

yo what up man, well i used to have a zc turbo on the hatch but i blew it, so we swapped a built mine me on the car, but when it starts it idles fine, but as soon as i press the gas it dies, so im thinking it has to be vacums or a electrical problem, but its throwing code 5 6 13 and 20, had a couple of guys take a look at it but they cant figure it out, thanks.......

5=MAP Sensor (Manifold Absolute Pressure) mechanical problem / disconnected piping


6=ECT Sensor (Engine Coolant Temperature) defective circuit or unplugged / defective sensor

13=BARO Sensor (Atmospheric Pressure) defective circuit or unplugged / defective sensor

20=Electrical Load Detector defective circuit or unplugged / defective sensor


looks like you have some bad sensors or a few unplugged items.

[EvasiveEF9]

Check the fuses, and test the sensors. I'll throw up a link to a helms manual if you need it. Keep us posted. Also, check ALL your vac lines...

[GsrCrx]

whats up yall, well the rover motor i had on it is gone, its cracked all the way around and piston cracked, but the guy that took it to the dyno when it wasnt running well kept it anyways, the thing is that a couple of people have already checked it and they said the sensors were good, and they cant figure out the vacuums since its turbo, if anyone on here knows how to fix this please let me know, and i will pay you to fix this...... thanks

[bigdare23]

BigDare's car is finally put back together!!!

Today I painted and reinstalled my lip and mounted my wheels back.
Thursday my 90-91 molding came in so I installed that.
All I need is a DA rear wiper arm so arm can clear my wing.
Also, I'm going to repaint my wiper arms black again!

[Halfwit]

werd?

[Black R]

hmmm....

so who all has had to cut into the cross member to get the headers to fit on their b16?


I don't have a b16, but on my swap I had to cut the shit out of the front crossmember with an aftermarket header...

After that, I wanted traction bars, so I got the jimfab joints and had to cut that too for clearance! :crazy:

So best solution is to get the fullrace traction bars, imho.

[Halfwit]

avid racing traction bars here, almost identical to full race, at 1/4 price.

[Halfwit]

and no cutting when u stay d series!!

except for your wrists when it never fucking runs.

[GsrCrx]

jajaja i hear that bro, lol +1

[Papa_Smurf]

where did you get your traction bars at? And how much did the cost?

[bigdare23]

I don't have a b16, but on my swap I had to cut the shit out of the front crossmember with an aftermarket header...

After that, I wanted traction bars, so I got the jimfab joints and had to cut that too for clearance! :crazy:

So best solution is to get the fullrace traction bars, imho.


They dont make those anymore (cuz I was looking for a set)

fullrace ones are high as hell and stock radiators dont work with them.

[bigdare23]

avid racing traction bars here, almost identical to full race, at 1/4 price.


Yeah I went to nopi to try and them right, the damn non-knowing what the hell he's talking about sells clerk couldnt find them and then start giving me prices for swap bars

I was like swap bars =/ tractions bars and walked out shaking my head.

when I get the money again i'm going back with the part number.

[quickdodge®]

bigdare, you have PM. Later, QD.

[bigdare23]

where did you get your traction bars at? And how much did the cost?


ebay (around $200-$250)
nopi (around $350)
Fullrace ($500) + their radiator
jimfab (dont know cuz you cant get them anyway)

[quickdodge®]

What about the grandfather of the EF? You could always use an EB in the mix, you know. Later, QD.

[bigdare23]

What about the grandfather of the EF? You could always use an EB in the mix, you know. Later, QD.


LOL

[quickdodge®]

Ahhh damn. Left the shit in limbo. Won't hurt my feelings if you sway the nay way. Lolol. But if your guess is yes, then rest assured the best will rep. Lolol, again. Later, QD.

[bigdare23]

Ahhh damn. Left the shit in limbo. Won't hurt my feelings if you sway the nay way. Lolol. But if your guess is yes, then rest assured the best will rep. Lolol, again. Later, QD.


You are a damn clow QD :lmfao:


You need to come out and hang with you grandchildren the EFs

carb>>>FI :lmfao:

[quickdodge®]

Ok, I'll take that as a No. But I'll still check things out. Later, QD.

[Halfwit]

love to see the papa civic QD.

[bigdare23]

Ok, I'll take that as a No. But I'll still check things out. Later, QD.


just bs'n

:goodjob:

[quickdodge®]

Lolol. Yessir. I will gladly take you people under my fender and lead you to the way of the CVCC. Later, QD.

[bigdare23]

just for everyone info.........


QD is the newest EF squad member!!!

[Halfwit]

woot woot.


remember what u said when we posted pics of last years meet? :cry:
thought u hated us.

[quickdodge®]

woot woot.


remember what u said when we posted pics of last years meet? :cry:
thought u hated us.

Actually, I don't. I also don't recall EF having a group like this last year. I also don't hate anyone. Later, QD.

[Halfwit]

just something i remember.

[quickdodge®]

just something i remember.

You can shoot me a PM if you want. I honestly don't remember this. Later, QD.

[Halfwit]

it was a while ago, but SENT.

[SiGuy]

couple of questions...

1. do you have to live in atl to be apart of the ef squad
2. what do you have to do to get in
3. what is a ef? rofl....j/k

[Papa_Smurf]

1. It's best to be in Georgia somehwere to be part of the squad, that way you can get to know everyone in the squad, but you'd have to talk to one of the OG's for an official ruling on that one

2. No requirements other than you need to have an EF to my knowledge.

3. I think's its sum kind of golf cart of some sort.

[EvasiveEF9]

1. No.
2. Nothing. Own one. Come to meets. Post up. Be active.
3. Don't be gay.

[SiGuy]

1. No.
2. Nothing. Own one. Come to meets. Post up. Be active.
3. Don't be gay.

i live in panama city, fl. i would be down for a weekend trip when it comes to meets....but my ef is going to be a trailer queen when it comes to the 4 hour drive.....

are you telling me not to be gay or is not being a gay a requirement to be apart of the crew.

[EvasiveEF9]

Half and half. If you're gay, we'll probably make fun of you from time to time. You'll either A) take it like a man (no pun intended) and laugh it off, making sure to keep your distance (if you get what I mean) or B) lie to us and tell us you're not gay when in all actuality you are, or C) we'll never hear from you again.

Otherwise the meaning behind "Don't be gay" was primarily aimed at yes, we ARE a group of guys that have fun, and laugh things off, but at the same time, remember that first impressions last a life time. My Z3 fenders made an impression, and now I can't get them off my asses about it even though I've got two fenders getting ready to be painted for my car. I'm also still known as "Joker" even though I haven't held that name for a few months, now.

[SiGuy]

Half and half. If you're gay, we'll probably make fun of you from time to time. You'll either A) take it like a man (no pun intended) and laugh it off, making sure to keep your distance (if you get what I mean) or B) lie to us and tell us you're not gay when in all actuality you are, or C) we'll never hear from you again.

Otherwise the meaning behind "Don't be gay" was primarily aimed at yes, we ARE a group of guys that have fun, and laugh things off, but at the same time, remember that first impressions last a life time. My Z3 fenders made an impression, and now I can't get them off my asses about it even though I've got two fenders getting ready to be painted for my car. I'm also still known as "Joker" even though I haven't held that name for a few months, now.

rofl....no i am not gay...and i mean that...lol....you got me good you f#$%ker....i think i might get some shit about my homemade itb's.....they are pretty ghetto
http://www.importatlanta.com/forums/showthread.php?t=123090

car is for sale....but only as long as i cant get it running....lol.....it has been pissing me off

[EvasiveEF9]

Don't give up on it. Never quit.

You're a noob. You're gonna get picked on for a while. Many of us have ALOT of training to be "thugs".

Ghetto? Hell...you should see some of the squad cars, LoL.

[SiGuy]

Don't give up on it. Never quit.

You're a noob. You're gonna get picked on for a while. Many of us have ALOT of training to be "thugs".

Ghetto? Hell...you should see some of the squad cars, LoL.

noob to this site....yes.....noob to forums and cars...by no means

[bigdare23]

noob to this site....yes.....noob to forums and cars...by no means

What's SiGuy?

I believe you got those msd injectors from me right?

[EvasiveEF9]

noob to this site....yes.....noob to forums and cars...by no means
No no no...most importantly it's "noob to EF squad"

[SiGuy]

What's SiGuy?

I believe you got those msd injectors from me right?

yes i did

[bigdare23]

yes i did

that's what's up.

Did you ever get everything running good?


Joker leave him alone cuz he's cool.

[SiGuy]

that's what's up.

Did you ever get everything running good?


Joker leave him alone cuz he's cool.

i did get everything installed....but i am still running into some issues....you can check out my pics in the vehicles for sale section.....lol

i have been trying to solve this issue for about a month and still nothing.....

[bigdare23]

So why sell it? If your a rex driver, than your going to run into problems.

[EvasiveEF9]

...I'm cool, too...

Keep it. Fix it. Took me 3 months, LoL. Wait...no...like...4 or 5...

[SiGuy]

15 month project has come to an end.....i have been drifting one of my buddies sr20 240....i think i am going to move over to nissan.....maybe.....

[EvasiveEF9]

Ok. Give me your EF free, then. I PROMISE to give it a good home. I've got room in my garage for another...

[BTLFED]

1. No.
2. Nothing. Own one. Come to meets. Post up. Be active.
3. Don't be gay.

Then how are you a member, homo? :gay: :lmfao:

[EvasiveEF9]

Then how are you a member, homo? :gay: :lmfao:
Cuz my partner is a supermod. Lollercaust.

http://farm1.static.flickr.com/62/153451866_f1390617fd.jpg?v=0

[BTLFED]

Cuz my partner is a supermod. Lollercaust.

So you and Mr. Kidd finally resolved your differences?

[EvasiveEF9]

Shit...you beat me to it.

I admit defeat...THIS TIME, fucker...I owe you your next beer.

[BTLFED]

When might that be? LOL

[EvasiveEF9]

When might that be? LOL
Well, shit, gator's probably free this weekend, LoL

Pick a day...fri? sat? I think we may go to wild bills Thursday...not sure. I've got a date to go to with a server at Taco Mac...but then the girls are wantin' to go...and I'm not one to argue. Apparently it's like 1$/beer? WTF FTMFW!!!

[BTLFED]

Wild Bills? No thanks. That shit is way out in Gwinnett and I'm not doing that on a weeknight.

I have to work Saturday. :(

[EvasiveEF9]

Wild Bills? No thanks. That shit is way out in Gwinnett and I'm not doing that on a weeknight.

I have to work Saturday. :(
Courtney called you a poon...

[BTLFED]

Courtney called you a poon...

I like poon, yes......

[EvasiveEF9]

I like poon, yes......
No no no...she said your PHYSICAL BEING...your anatomy make-up is OF poon.

No..."you are what you eat" does not apply to supermods.

[BTLFED]

No no no...she said your PHYSICAL BEING...your anatomy make-up is OF poon.

No..."you are what you eat" does not apply to supermods.

Yes it does, especially because I LOVE licking pussy. :lickpuss:

BTW:

http://i192.photobucket.com/albums/z71/Nihilschiz/Lollercaust.gif

[EvasiveEF9]

No, but I already said it DOESN'T apply to you.

Seeing as my car is driven, I outrule you. That, and I hid your banstick, so I'm not worried.

Well, that and I have a higher post count and rep count than you (I'm starting to dream. Shh. Don't ruin it for me.)

[BTLFED]

No, but I already said it DOESN'T apply to you.

Seeing as my car is driven, I outrule you. That, and I hid your banstick, so I'm not worried.

Well, that and I have a higher post count and rep count than you (I'm starting to dream. Shh. Don't ruin it for me.)

Yes it does. Ask any of my x-girlfriends. :lickpuss:

And my banstick can't be hidden.

[EvasiveEF9]

What about auctioned off on ebay?

We'll just have gator grab your banstick....

We ARE talking banstick, right?

[jfrolang]

Why hasn't D posted pics yet? WTF Mr. Baker.

[bigdare23]

Why hasn't D posted pics yet? WTF Mr. Baker.


LOL, it's coming!!! Hopefully me and uproot can get a free min during the meet :goodjob:


{by the way, the body is 100% put back together}

[bigdare23]

sneak peak.....
http://www.importatlanta.com/forums/showthread.php?t=124491

[BTLFED]

What about auctioned off on ebay?

We'll just have gator grab your banstick....

We ARE talking banstick, right?

Depends...what's she trying to grab? ;)

[EvasiveEF9]

Depends...what's she trying to grab? ;)
Haha, courtney and I tried talking her into leaving a voicemail today at Zaxby's...with no prevail. She'll be there friday, it looks like.

[BTLFED]

Haha, courtney and I tried talking her into leaving a voicemail today at Zaxby's...with no prevail. She'll be there friday, it looks like.

Interesting.......Hmm......

[Papa_Smurf]

Whats the deal w/ sunday?

Mountains or no mountains?

[bigdare23]

The plans haven't changed yet.

[Papa_Smurf]

k, good, cause i'm looking forward to a mountain run.

Sum1 just told me that they didn't think the mountain run was going to happen..

[bigdare23]

Yeah its going to happen unless joker can't make it on sunday. The main reason for the mountain is so we can get some really good pictures!

[Papa_Smurf]

yea, good pics and exciting roads, i'm defiantly down.

didn't he say he was going to have a video cam too?

[bigdare23]

Honestly, I don't know (but more than likely yes).

[EvasiveEF9]

Someone else is supposed to have a mounted vid cam...don't know what the deal will be on that. I think my passenger(s) will have one...whether they ride with me or someone else. I'd like to get some of the EFs to spend some extra time up there so we can do some footage where we'll drop off the camera guy up the road, turn back, pass him, grab him, and move to the next spot...

As of right now, though, the plan is to go up there and we'll do a semi-calm/semi-spirited run through the mountains, stopping here and there for photos. A second run will be held later in the day that will be more spirited with less stops. It wont' be a race, but it will be semi-competitive...just...without the passing and stuff.

[StraightSix]

I did get hold of my roommate's ChaseCam set-up and will bring it with me on Sunday.

I'm coming down for sure on Sunday.

[efman]

Someone else is supposed to have a mounted vid cam...don't know what the deal will be on that. I think my passenger(s) will have one...whether they ride with me or someone else. I'd like to get some of the EFs to spend some extra time up there so we can do some footage where we'll drop off the camera guy up the road, turn back, pass him, grab him, and move to the next spot...

As of right now, though, the plan is to go up there and we'll do a semi-calm/semi-spirited run through the mountains, stopping here and there for photos. A second run will be held later in the day that will be more spirited with less stops. It wont' be a race, but it will be semi-competitive...just...without the passing and stuff.
so joker when and where are we gonna meet up here ?

[EvasiveEF9]

I did get hold of my roommate's ChaseCam set-up and will bring it with me on Sunday.

I'm coming down for sure on Sunday.
Outstanding, glad to hear it...

so joker when and where are we gonna meet up here ?
Sometime after the varsity on sunday...
http://www.importatlanta.com/upload/files/5/EFsquadSUMMER.jpg

[efman]

we dont have an exact time cause i'm not going to the V but will meet yall in the mountains/ end of 400 so dare or evasive do yall have a clue of around when yall will be up here

[EvasiveEF9]

I would GUESS around 1...? How about throwing one of us your number and we can call you on our way up?

[efman]

i pm'd you

[EvasiveEF9]

Got you. You'll here from me.

[efman]

cool thanks man i'm getting new tires tomarrow morning =]

[bigdare23]

it starts in 10mins...

[SiGuy]

FINALLY AFTER A COUPLE MONTHS OF ISSUES....I FINALLY FIGURED OUT THAT I AM A RETARD!!!!

THE SPARK PLUGS WERE GAPPED @ .021 WHEN THEY NEEDED TO BE AT .047 TO .051
AND THE SPARK PLUGS WIRES WERE WRONG....THE CYLINDER # ORDER IS 4321 BUT I HAD IT WIRED UP 1234 .... SO THE SPARK PLUG WIRES WERE ASS BACKWARDS

IT IS TIME FOR ME TO MAKE MY WAY TO A GIANT EF MEET!!

[EvasiveEF9]

Smooth. Welcome back...?

[SLPR]

1989 CRX SI. all stock except for sittin on tein s-techs. will see a dohc zc swap soon.
heres my for sale thread(no longer for sale though).
http://www.importatlanta.com/forums/showthread.php?p=35730732#post35730732

[bigdare23]

1989 CRX SI. all stock except for sittin on tein s-techs. will see a dohc zc swap soon.
heres my for sale thread(no longer for sale though).
http://www.importatlanta.com/forums/showthread.php?p=35730732#post35730732


nice :goodjob:

Oh yeah, if your motor in your Si is good i wouldnt swap a zc in it. It's not much of a upgrade for a Si since it's adding more weight (not not much power). If you had a DX or HF then you will notice the difference more. :2cents:

[quest]

the ef squad founder is my nephew u will see pics of my 91 si rex pretty soon im under construction ls wheels cumon soon !!! represent BIGDARE 23

[bigdare23]

the ef squad founder is my nephew u will see pics of my 91 si rex pretty soon im under construction ls wheels cumon soon !!! represent BIGDARE 23

Bout time you post kid!!! Hurry up get your ride back clean.

[SLPR]

nice :goodjob:

Oh yeah, if your motor in your Si is good i wouldnt swap a zc in it. It's not much of a upgrade for a Si since it's adding more weight (not not much power). If you had a DX or HF then you will notice the difference more. :2cents:
yea i was gonna go with the Si motor till it died on me. its got 155,xxx on it so it should have alotta life left to it, as long as i take care of it.

[BTLFED]

nice :goodjob:

Oh yeah, if your motor in your Si is good i wouldnt swap a zc in it. It's not much of a upgrade for a Si since it's adding more weight (not not much power). If you had a DX or HF then you will notice the difference more. :2cents:

Don't listen to a word this man says. He obviously has no idea.

[EvasiveEF9]

Don't listen to a word this man says. He obviously has no idea.
Nor does this guy. He keeps telling people he's got a CRx...

BTW - Wild Wings friday. I'm making it tradition with or without you...and I'm requesting Emily from now on. Looks like a couple people may or may not visit us this friday.

[BTLFED]

Nor does this guy. He keeps telling people he's got a CRx...

BTW - Wild Wings friday. I'm making it tradition with or without you...and I'm requesting Emily from now on. Looks like a couple people may or may not visit us this friday.

I'd like to "request" Emily too. :lickpuss: :idb: ;)

[EvasiveEF9]

I'd like to "request" Emily too. :lickpuss: :idb: ;)
God...wouldn't we both?

Courtney's gonna read this...but I don't give a damn what she says. I think that server is relatively cute. I'd give it to her. Or at least put it in her mouth til the swelling went down...or...didn't go down...

[bigdare23]

Don't listen to a word this man says. He obviously has no idea.


{roll eyes}


:blah: :blah: :blah: :blah: :blah:

[Halfwit]

woot.

[Whiteboy™]

is that the CRX that was sitting at mainstream?

[Halfwit]

YES IT IS, I HAVE IT BACK NOW. who is this./?

[Whiteboy™]

this is Alex, black sedan....

[Halfwit]

i dont think i met you.

[Konstantin]

89 CRX Si - Alpharetta/Roswell

[Papa_Smurf]

EVERYONE CHECK OUT THE HYPE IN THE WHORES LOUNGE!!!!

Link: http://www.importatlanta.com/forums/showthread.php?t=129015&page=1&pp=20

[Papa_Smurf]

awe, thread go bye bye :(

[Whiteboy™]

i dont think i met you.

well i know your name, lol

[bigdare23]

I remember when this thread was "Da Shit" Damn that was so 6 months ago.

[EvasiveEF9]

What did I miss in the whoreslounge?

[toonz]

I'm back so what does this mean ...........hmmmmmmmm...........LOL.........me being tha shit and all............. I guess this thread is the shit again huh..................LOL.......................... ........just whoring up a bit...........................LOL................. ............SuckaZ..........................LOL... .........................Joker how you been man...........................still fucking with your dream girl huh...............PALM-mala...............LOL...........get it...........................LOL.................. ......LOL.....................................bye bye!

[coreylol]

ATL
88 HF stock,stripped
91 HF b16, various bolt-ons, soon to be swapped to the 88

[cactusEG]

here lol

[EvasiveEF9]

LoL, actually...naw, I gave up the hobby of girls. I'm now on the hobby of rifles. You should uh...see my collection. Check out my group shot...

[toonz]

Im still into hand guns LOL ask D about'em and I'm legal, LOL

[Halfwit]

whatsup toonz?

[toonz]

Wassup Halfwit? I see you sold some of your stress in your life, LOL

[toonz]

I like the new ride tho

[Halfwit]

I like the new ride tho
thanks....yeh still tryna sell some of the stuff, and the headache is still in my backyard, but should be gone soon.

[EvasiveEF9]

Im still into hand guns LOL ask D about'em and I'm legal, LOL
I'm working on rifles, first. Longer range. :)

But hey, man, let's go to the range some time if you're ever up this way, or whatever. And yes...I'm legal, as well. Not to mention trained...

[toonz]

Good Halfwit! Joker I always told D we should meet up to go to a range but I guess I was to busy or something. One day when I get the rex running me and you should go shoot and we can bring D to teach him how to hold one, LOL, oh and my boy Jeff too!

[AnTi-PooN]

i have a desert eagle (dinosour hunter)

[EvasiveEF9]

Skinny, come on out, then!

Toonz, that sounds like an awesome idea. Seriously. I've got an old WWII M1 Carbine .30. Wood stock. Just shy of mint condition. Inherited it from my dad who inherited it from his dad. I'm working to get an AR15 fairly soon...VERY soon if I don't get this jet ski. As for pistols...don't have one, yet. When I do, it'll probably be a 9mm sig or beretta.

[bigdare23]

I'll come with my airsoft gun





(Roll eyes)

[Papa_Smurf]

Evasive, you getting into guns because you want to take your E-Thuggin to real life?

[AnTi-PooN]

my frends dad has a russian military issue something rifle shoots 303 or sumthin butits crazy

[EvasiveEF9]

Evasive, you getting into guns because you want to take your E-Thuggin to real life?
E-thuggin'? Please. I'm not QD, or Mr. Kidd. I just call out Toonz cuz he's easy prey.

[EvasiveEF9]

I'll come with my airsoft gun


(Roll eyes)

I've got a rifle you can try out. Once you shoot a gun...it's just a totally different feeling from anything else...it's really unexplainable.

[JDM onlyy]

Coooool...other EF drivers...lol. I got one but it's ugly right now and doesn't run cause some retard decided to loosen my cam gear and forgot to tighten it back up and it shaved my cam gear and cam gear key down...bleah. But yeah I'm an EF driver and once my car is right, I'll have pics and be coming to the meets. :goodjob:

[Papa_Smurf]

sweet, definitely take sum pics so we can see what your car looks like

[bigdare23]

post pics!!!! Basically everyone's car is a work in progress and they still rep it!

[EvasiveEF9]

Coooool...other EF drivers...lol. I got one but it's ugly right now and doesn't run cause some retard decided to loosen my cam gear and forgot to tighten it back up and it shaved my cam gear and cam gear key down...bleah. But yeah I'm an EF driver and once my car is right, I'll have pics and be coming to the meets. :goodjob:
What motor do you have? I might be able to donate a cam and/or came gear to your cause...

[toonz]

Yeah Joker those sig's are the best!

[toonz]

LOL, D with his airsoft!

[EvasiveEF9]

Yeah Joker those sig's are the best!
YOU GOT ONE!?!?!?

Originally I wanted a Beretta 9mm. It's military/police spec, but I heard from my gun expert/friend that they have a tendancy to pinch your skin, and sometimes malfunction. He highly advised either the 229 or 226...I think it was the 226. I will get one as soon as money comes right...

[toonz]

YOU GOT ONE!?!?!?

Originally I wanted a Beretta 9mm. It's military/police spec, but I heard from my gun expert/friend that they have a tendancy to pinch your skin, and sometimes malfunction. He highly advised either the 229 or 226...I think it was the 226. I will get one as soon as money comes right...
226:goodjob: but I don't have A sig. I'm working on one now tho. I have a smif&wesson 9mmSW9VE glock-look-alike, LOL, but it damn sure does the job!:lmfao:

[EvasiveEF9]

Not a big fan of gloks anyways. They look to shoot bullets at the handler, LoL. I've got an old-wester style S&W .357 long-nose I could bring out :)

[toonz]

Sounds like a plan!

[SL65AMG]

IM back...... but you all know that. just had to make it official

[EvasiveEF9]

Sounds like a plan!
Call the date.

[I <3 my EF]

Okay guys a 91 std hatch d15b1 hoping to buy a zc from a dude soon, hopefully. New to this whole import atl thing so just posting saying I have an Ef.
It's just the usual STD EF black bumpers with steelies. Nothing special.

[Papa_Smurf]

post sum more pics of your ride bro.

i could help you out w/ the swap, well, my dad could anyways lol. He's swapped it twice,one in my car and one in his car, so it's like second nature to him

[EvasiveEF9]

Yeah, man, welcome to the squad. If you drive an EF, you'll fit right in. Black, white, hispanic, or mutt...we love everyone. Except the gays. If you're gay, we have a couple people that aren't exactly sure of the themselves...so you gotta watch out for 'em. I'm not gonna call out who it is, but what I can do is give you a hint...the begining of the name sounds like "tune". Just be weary...

[toonz]

LOL, nah, his name used to be Joker and he used to drive a gray primered EF with z3 fenders, LOL, he thought it was JDM so he changed his name to something EF9

[I <3 my EF]

Thanks for the welcome I'll try to make it to the next meet. If my parents let me maybe you guys can see my awe-inspiring driving skills this Sat.

[Double_0_Rusty]

89 civic hatchback Si.

Mods:
Aem Cold Air intake
Zc swap
Battery relocation with Dc sports Tie down
Aerospeed coil overs
2000 Si wheels
Full exhaust
Dc sports 4-2-1 header
Alpine head unit
silverstar headlight bulbs

[Double_0_Rusty]

89 civic hatchback Si.

Mods:
Aem Cold Air intake
Zc swap
Battery relocation with Dc sports Tie down
Aerospeed coil overs
2000 Si wheels
Full exhaust
Dc sports 4-2-1 header
Alpine head unit
silverstar headlight bulbs

[bigdare23]

Nice hatch rusty! How far are you from uga? I'm down here visiting my woman until next week.

[Double_0_Rusty]

Nice hatch rusty! How far are you from uga? I'm down here visiting my woman until next week.

Thanks bro. My house is like 13mins from UGA. I actually live in Bishop, but I rep Athens hard...lol

[toonz]

hmmmmm........

[Double_0_Rusty]

^^^^hrmmmm lol

[Papa_Smurf]

so we've gotten a bunch of new members lately...

thats great. i'm just hoping that they come to the meets!!!!

[Papa_Smurf]

double, is that a DOHC or SOHC ZC?

i'm counting on a DOHC....

[Double_0_Rusty]

Yo man its a DOHC

[bigdare23]

Thanks bro. My house is like 13mins from UGA. I actually live in Bishop, but I rep Athens hard...lol


nice, I may see you around sometimes then :goodjob:

[Double_0_Rusty]

10-4:goodjob:

[Papa_Smurf]

Yo man its a DOHC

oh tight, thats badass. now i've got sum1 to battle when we dyno :goodjob:

but i'm going to be looking into getting a jackson racing supercharge in a few months...:ninja:

[toonz]

I want to drive so bad!

[Double_0_Rusty]

oh tight, thats badass. now i've got sum1 to battle when we dyno :goodjob:

but i'm going to be looking into getting a jackson racing supercharge in a few months...:ninja:

I dunno if mine will be put on a dyno anytime soon. lol

i hear ya....i want to supercharge mine....in a few days I am ordering Skunk2 dual bend short throw shifter, and Im looking for some black rota gt3's.

[Papa_Smurf]

dont you have the Si's.... if you, what are you doing with them?

idk, that may be sum1 els i;m thinking of...

[Double_0_Rusty]

dont you have the Si's.... if you, what are you doing with them?

idk, that may be sum1 els i;m thinking of...

yeah bro i have the Si's. I want to trade someone for some rota's and throw some cash to boot. Right now they are on the car.

[Papa_Smurf]

ahhh i'm drunk and i'm about to smash it!!!

woot toot for sex!!!!!!

[bigdare23]

This thread is dead so its going to disappear in a few days....

[Papa_Smurf]

lol this thread was TEH SHIT when i first got on IA, and now this... what a shame..

[Double_0_Rusty]

So uh I was pulling out of my driveway yesterday around 6ish, and saw a bad ass crx come by me. I don't know if it was anyone from on here. But it was kinda silverish blue? with 17's maybe 18's? BTW I live out in the country near Athens. Lemme Know if it was one of you guys.

[EvasiveEF9]

FUCK NO! THIS SHIT WILL NOT BE ON LOCK DOWN!

Take your damn sales to PM's.

Toonz, wtf are you...

[jfrolang]

bump.

[EvasiveEF9]

TTT

[Double_0_Rusty]

up

[EvasiveEF9]

:bump: <= "bump" mascot

[Double_0_Rusty]

:bump: :goodjob:

[Papa_Smurf]

ben, that guy said $600 and he'll deliver that car to you man, thats a deal.

it even runs!!!

[EvasiveEF9]

:bump: :goodjob:
...don't you mean :goodjob: for the :bump: mascot?

[jfrolang]

the SQUAD has spoken. We like our useless old thread.

[Double_0_Rusty]

...don't you mean :goodjob: for the :bump: mascot?

yeah.....wait im confused.:thinking: Nonetheless, :bump: ! :D

[EvasiveEF9]

the SQUAD has spoken. We like our useless old thread.
I guess Dare's just gonna have to bite it.

[EvasiveEF9]

Hey...shouldn't ya'll be headed to wild wings...?

[Double_0_Rusty]

Hey...shouldn't ya'll be headed to wild wings...?

If it's in Athens I would be down, but I live to far away:(

y'all have fun:goodjob:

:bump:

[EvasiveEF9]

If it's in Athens I would be down, but I live to far away:(

y'all have fun:goodjob:

:bump:
If you show to the big meet...I'll consider forgiveness...

[Double_0_Rusty]

If you show to the big meet...I'll consider forgiveness...lol when is the "big" meet?

[Papa_Smurf]

thats still yet to be determined rusty...

and ben, i see you have interest in that guys hatch. hope you get it

[Cato ED-6]

I think we decided, during the mini-meet, that its going to be in early November. If I'm not mistaken. Just ask ben or dare, I'm not 100%.

[Papa_Smurf]

I think we decided, during the mini-meet, that its going to be in early November. If I'm not mistaken. Just ask ben or dare, I'm not 100%.

thats when the big meet is?

well hrm... cause ben said that we would do a mountain run again when is cooled down, like in november.... but i guess those plans are shot because of his hatch :thinking:

[Papa_Smurf]

Spoon's EF9 on the track:

http://www.youtube.com/watch?v=_cm53S9OWco

(i want a b16) :yes:

[jfrolang]

Spoon's EF9 on the track:

http://www.youtube.com/watch?v=_cm53S9OWco

(i want a b16) :yes:
I like how they were basically shitting on it, and then they drove it and were all impressed. :D

[Papa_Smurf]

I like how they were basically shitting on it, and then they drove it and were all impressed. :D

lol yea, i liked that too. I also liked the part where he had that big hammer and the magic wand....:screwy:. People in JDM Land are weird....

[Papa_Smurf]

Oh yea, on a side note, i offered my dad $1,000 for his engine and he's considering it, because he wants to get a B18c5 from jhott.

So, mr. baby blue hatch might have a b16 in the future :ninja:

[ash7]

Sign me up!

http://i2.photobucket.com/albums/y44/hatch77/betsy.jpg
http://i2.photobucket.com/albums/y44/hatch77/betsyengine-1.jpg
http://i2.photobucket.com/albums/y44/hatch77/betsyinside.jpg

-jonathan

[MikeyPrzy]

Mikeyprzy 1991 Honda Civic HB gogogo 16.8 @82.9 gogoogo FAST CARRRRRRRRR

[Papa_Smurf]

Sign me up!

-jonathan

post these up in the picture thread :goodjob:.

[EvasiveEF9]

CRX 7, what climate is that?

MikePrzy, welcome.

[jfrolang]

CRX 7, what climate is that?

MikePrzy, welcome.
That would be a 90-93 Accord unit.

[Papa_Smurf]

CRX7, is this the b20 CRX that was for sale on here awhile back?

[ash7]

yessir

*sigh* the things I've had to fix are almost countless, all the ghetto wiring, horrible interior, (now paint), suspension... the list could go on.

-jonathan

[Papa_Smurf]

yessir

*sigh* the things I've had to fix are almost countless, all the ghetto wiring, horrible interior, (now paint), suspension... the list could go on.

-jonathan

yea, i remember seeing it before and it didn't appear to be in the best shape.

well, it's a great project car that i know you will bring justice to :goodjob:

[ash7]

yea, i remember seeing it before and it didn't appear to be in the best shape.

well, it's a great project car that i know you will bring justice to :goodjob:

that's the exact same thing i thought

"what a great project car, it's almost done!" lol

to be brutaly honest... i used to HATE the way a CRX looks. A-Ran can quote me as saying "one of the ugliest hondas they ever made..."

...and look at me now, lovin it. These things are totally sweet; i love the way they drive.... it's def. geared torwards being a "driver's vehicle." And it looks a little better every morning when i walk out to it to drive it to work.

Consider me hooked
-jonathan

[Papa_Smurf]

that's the exact same thing i thought

"what a great project car, it's almost done!" lol

to be brutaly honest... i used to HATE the way a CRX looks. A-Ran can quote me as saying "one of the ugliest hondas they ever made..."

...and look at me now, lovin it. These things are totally sweet; i love the way they drive.... it's def. geared torwards being a "driver's vehicle." And it looks a little better every morning when i walk out to it to drive it to work.

Consider me hooked
-jonathan

to be honest, i never really liked CRX's either. I think thats because all i saw was the completely stock looking ones rollin around on the streets, and they were never appealing to me :no:. But my dad got an EF hatch and started working on it, motor swaps etc etc. and i just became hooked on all EF's and i had to get one for myself.

And i totally agree with you on the "driver's vehicle" comment. just wait till you bring it up to the mountains, you're going to absolutly love it :goodjob:

[bigdare23]

goodnight homies!!!

[ash7]

And i totally agree with you on the "driver's vehicle" comment. just wait till you bring it up to the mountains, you're going to absolutly love it :goodjob:

speaking of:

A-Ran and i are headed up to the Tail on the weekend of Oct. 5th. We'll be staying there all weekend watching fools drive themselves off a cliff. If anyone wants to come with, just shoot one of us a PM and we'll get back to you with all the details.

I don't want this to be anything big or organized (the more folks that come, the more problems are created), but if a couple guys want to tag along that'd be sweet.

-jonathan

[StraightSix]

Did anyone else notice the S2K cluster?

[Papa_Smurf]

Did anyone else notice the S2K cluster?

yea, we talked about it in another thread...

does it actually register the speed, i thought you had to have a hydro tranny for those for it to work or somethin :thinking: i dunno, i'm half asleep.

[Konstantin]

What was the other thread?

[Papa_Smurf]

car pic section:

http://www.importatlanta.com/forums/showthread.php?t=137228

[ash7]

It requires a cable to digital convertor for the VSS in order to register speed...

:) i have this convertor. lol (but i can't get it to work right for some reason or another... dang)

-jonathan

[Papa_Smurf]

It requires a cable to digital convertor for the VSS in order to register speed...

:) i have this convertor. lol (but i can't get it to work right for some reason or another... dang)

-jonathan

so it doesn't work, the speedo? thats sucks.

[ash7]

It should work, i have all the hardware. but i believe i have a couple wires mixed up, I've been too busy with everything else on the car to have time to fix it.

...drives me insane though. I'll probably fix it tonight.
-jonathan

[Double_0_Rusty]

EF'S UNITE....lol What's going on peeps?