engine builder needed

[1 SICK GT]

i build honda/acura motors. tell me what you need done if that is the motor you need done.

I build NA motors, but i have a few turbo motors coming up that i have to assemble. I measure Ring gap, bearing clearances, piston to wall clearance if you have forged pistons, i can degree camshafts if you need it done, measure roundness of bore, etc.

you cant just jump on a forum and build a honda engine. there are tricks to putting any engine together. its a numbers game. tighter or loose bearing clearances affect power and longevity, ring gap affects power and ring seal, etc.

what engine do you want built?

it's a madza engine 2.5L V6

[Twinturbo6]

it's a madza engine 2.5L V6

OK are you talking about the 4 bolt main, quad cam, kl03, 2.5 liter?

are you looking to stroke it using honda rods, machining the crank journals to accept said rods,( thusly creating a stroker motor ) and inserting custom sleeves at a larger ( 3 liter displacement ) size? effectively makeing it a 3.3-3.4 liter, capable of holding over 30 psi.

If so I am looking to do something alone those lines myself.

If not sorry to have disturbed you.

[1 SICK GT]

OK are you talking about the 4 bolt main, quad cam, kl03, 2.5 liter?

are you looking to stroke it using honda rods, machining the crank journals to accept said rods,( thusly creating a stroker motor ) and inserting custom sleeves at a larger ( 3 liter displacement ) size? effectively makeing it a 3.3-3.4 liter, capable of holding over 30 psi.

If so I am looking to do something alone those lines myself.

If not sorry to have disturbed you.

nope i don't want parts i have to modify, you might be refering to the guy that lives in tuscaloosa, al

just to let you know pauter makes rods for our cars and ross makes pistons they go in with no modifications