This entire arguement is pretty dumb.

1. The car passed Tech at a Road Race venue. Hallett Raceway in OK to be exact if the other thread is to be believed. So it PASSED a Tech, most likely an SCCA tech. So whatever he did, he did it right. Either that, or the Tech Inspectors up there are fucking stupid.

2. Weld in or Bolt in, the car upended and landed flat on the roof. It was a flat hit. Not a side glance or a roll but a flat fall straight on the roof. That will test the best of bought cages. When I safetied for a Stunt man friend of mine, he welded one up for a Pipe Ramp roll for in a Limousine, it was welded the entire length of the Limo insides. He hit the ramp too close into center and lazy flipped it. The only thing that kept his from pushing through was that he landed on a bed of cars. It he would have landed flat onthe pavement, same thing would have happened.

3. As for bikes being safer than cars. That's a toss up. Anytime you go skidding across the ground on some Cow Skin, then do a tumbleweed in the grass, you are going to get hurt. I know AMA racers who are good, and they are injured about 30% of the time. Missing work and other things. I don't see that of my Amatuer Auto racing friends. Not by a long shot.

So...none of you know what kind of cage it was, what size the feet were, if they were welded or bolted in....so whats the arguement and how in the hell does this have a thing to do with Stance people? That's about the dumbest statement i've heard in this entire thread. OP, if you would have shown a thread of a Hella Flush guy with a bolt in Cusco cage who flipped it in the mountains of North Georgia...I would agree with you. But you chose a track teched race car that landed on a flat hit. Plus....you are 25 years old, you aren't much past Kiddie status yourself.

So go try and pick on another style of vehicle....or at least post a photo and thread of the style you are trying to make fun of. This entire thread reeks of stupid.