turbos r really comin in strong with the v-8 crowd. get a blow through set up. that guy seems to really know what hes doin. they also sell blow through carbs. if you go twin just set up each side independently with wastegates too and run 7 psi per side. with a total of 14psi at entry and then run the 2 together right b4 the hard hat entry that has to be sealed on the carb and get your timming and fuel dead on. or get a big single setup and run the 2 exhausts together b4 the turbo.if you went to a fi set up you could tune with a lap top on the spot and lots of $$$$. but blow through with the right jetting in the carb is the cheaper route! take a look on youtube and type 2500hp dyno in the search bar and see what you think!