Real hp out of SOHC motor... possible?

[w3bcod3r]

Is it possible to get some real hp out of a SOHC motor... and if yes what would you do...?

[Vteckidd]

stock motor you can get 220-230 out of the VTEC engines

Non Vtec 180-200 is more realistic

they are fun cars if you do the turbo kit right an keep the turbo small!

[JDM onlyy]

stock motor you can get 220-230 out of the VTEC engines

Non Vtec 180-200 is more realistic

they are fun cars if you do the turbo kit right an keep the turbo small!

I knew a dude that made 280whp on a stock block and head....blew it to hell when the boost upped itself..Lol. Shit was pretty funny...he'd doing it again too....stock internals, only with a d16z6 this time. Before it was a Mini Me

[Bruce Leroy]

Is it possible to get some real hp out of a SOHC motor... and if yes what would you do...?

Don't you drive an accord? Whats "real hp"?

Boosted f22 will net you more power than a d.

Thread on h-t about boosted f22
http://www.honda-tech.com/zerothread/1657517

[SoLJames95]

F is stronger then d. What Mike said about the motors on power in a d series is a lil high. 220 to 230 damn. That shit will blow up!

[blue_5g_zc]

why do so many people underestimate the D series? look on other sites and they make 300+ all day with built bottom ends and stock heads.

thats about all u need for a fast driveable daily

[-S Double C-]

why do so many people underestimate the D series? look on other sites and they make 300+ all day with built bottom ends and stock heads.

thats about all u need for a fast driveable daily

actually d series vtec stock heads are good for 400whp all day long. You could tear open a d16 throw in 150 vitara pistons a set of tuner toy rods or eagle and basic oem stuff and put down 400whp with ease with less then a grand in your motor. And it would be SAFE if tuned right! There's a shitload of d16's on H-T putting down over 400whp on stock sleeves with vitara pistons. 500whp range with cp's and je's on sotck sleeves.

[blue_5g_zc]

actually d series vtec stock heads are good for 400whp all day long. You could tear open a d16 throw in 150 vitara pistons a set of tuner toy rods or eagle and basic oem stuff and put down 400whp with ease with less then a grand in your motor. And it would be SAFE if tuned right! There's a shitload of d16's on H-T putting down over 400whp on stock sleeves with vitara pistons. 500whp range with cp's and je's on sotck sleeves.

preaching to the choir man, i run a built bottom D with vitaras and scat rods. stock head with arp studs and HG

[LSTurboHatch]

preaching to the choir man, i run a built bottom D with vitaras and scat rods. stock head with arp studs and HG

thats the way to go. i would be running vitaras if i didnt get such a good deal on these wisecos.

[EmminoDaGreat]

300+ d series dont last... i can show you...

[Bruce Leroy]

300+ d series dont last... i can show you...

Not a completely true statement. i know of d17's that have over 300whp for atleast a year. Granted they are built, but they are still d series.

[Kyle]

Casey made 285hp for about 30 minutes total.

[bigdare23]

Casey made 285hp for about 30 minutes total.

I knew his name would come up sooner or later

[©hris]

Dezod has a 370whp D17

[©hris]

Gaining 350+ whp in a D17 EM2 would cost upwards of $10,000 or more w/ no sponsor hookups and having a shop do all of the work.

[SoLJames95]

Been there done that. You wont even make 230 whp on stock internals for long time. You need to build and dont try to up boost past tune. Not worth it.

[-S Double C-]

Been there done that. You wont even make 230 whp on stock internals for long time. You need to build and dont try to up boost past tune. Not worth it.

BULL **** my girl's brother made 254whp and 217trq on a stock d16y8 with a ebay kit and drove the **** out of it for 8 months and ran it low on oil and spun a bearing. Now he put in in 120 dollar vitara pistons FJT Custom rods and dynoed 412whp 326trq at 28lbs

[w3bcod3r]

See thats the whole thing... i don't have time to bore the motor out or replace any critical parts for that matter... turbo or supercharger???
Whats the max psi would i be looking at anyhow... and no, im not expecting 20 ... maybe 13-15... sounds real or what?

[Bruce Leroy]

See thats the whole thing... i don't have time to bore the motor out or replace any critical parts for that matter... turbo or supercharger???
Whats the max psi would i be looking at anyhow... and no, im not expecting 20 ... maybe 13-15... sounds real or what?

You should be more concerned in mow much power you are going to make rather than how many psi your turbo is going to be pushing.

You should do some more research before you boost your motor. Or just take it to a shop who knows what they are doing.

This would be a great stock block street setup..

im the guy cd5 jeebies was talkin about with the t 3/4 on the accord. Its a t3/04e 48/60 with stage 3 57 trim wheel.

The 63 hot side is cool but WILL spool later. Ive got full boost by 33-3500, and it pulls like a train til redline. With all the new upgrades, im sure it will be even more brutal. Its GREAT on the street. i thought about running the 63 hot side, but decided against it, besides the stage 3 wheel in a 57 trim spools PERFECTLY in my EXPERIENCE...ask fatty.... he was grabbingfor shit to hold onto when i took him for a ride in it the first time. LOL

Stock block at 10 psi on a conservative tune got me 260 whp/270 tq. Car has run 13.89 w/ shitty 60 foots (2.3s), subs, PS, A/C, im fat, full interior on 17s.

Motor had 140000 on it when i boosted it. Ive BEATEN it for 6-7 months and around 20000 miles. I got a coolant pushing sit. goin, so i pulled the head, and the motor (sleeves-valves-pistons) still look really good. Tossing in some ARP head studs, new HG, got my exhaust mani ceramic coated, designed and built a new downpipe (coated and wrapped). 3 bar MAP, and a new tranny (H-23 for the shorter 2nd -5th gears). Not to mention the DELTA cam (hopefully it will be done thursday). Retuning for 13-14 psi, looking for 300+ whp on conservative tune

[SoLJames95]

^^
Thats different from a d series. That guy is runnin a f series from what it sounds like. I you will not make that on a d series at 10 pounds. I run 10 on a 1.5 D and I make 207 and 195. My friend runs a f series and runs 7 pounds and makes 220 and 216. All of this is on a Stock Block.

[Bruce Leroy]

^^
Thats different from a d series. That guy is runnin a f series from what it sounds like. I you will not make that on a d series at 10 pounds. I run 10 on a 1.5 D and I make 207 and 195. My friend runs a f series and runs 7 pounds and makes 220 and 216. All of this is on a Stock Block.

I know its a f series. I think the op drives an accord.

[SoLJames95]

gotcha!!!!

[superboost]

Tigger made 374hp out of a built d16 running 18psi. Just takes the right parts and setup.

the ford guys put down 500+whp all the time on SOHC and the volvo guys are making 400whp+ easily on SOHC.,

[B18c1Turboed]

Rota92 on h-t made 568 HP Single Cam @ 34 psi. His dyno chart






D16z6
GT3567R .82
34 psi
Dynapack dyno

[JDM onlyy]

Rota92 on h-t made 568 HP Single Cam @ 34 psi. His dyno chart






D16z6
GT3567R .82
34 psi
Dynapack dyno

Ummm WOW!!! Thats the shittt right there...I want that engine and set-up.

[Vteckidd]

Rota92 on h-t made 568 HP Single Cam @ 34 psi. His dyno chart






D16z6
GT3567R .82
34 psi
Dynapack dyno

and he doesnt make over 250whp till 6000+rpms. talk about LACK of a powerband. He would get WALKED on by a 250-260whp GSR with a t3 Super 60. He jumpes 250whp in 700rpm, all he is going to do is SPIN

TO the guy saying 300whp is easy on a stock motor, you are 1 of a million that had a motor stay together past 250whp on a stock D series bottom end.

Anyone LOCALLY that has made over 350whp BLOWS UP. They arent made to last. I only know what i have seen and tried.

Turbo D series on a stock block are good for 220-230 with VTEC and 180-200 NON VTEC. anything past that, be prepares to build or swap the motor withing MONTHS. IT WILL BLOW UP, you can have Jeff Evans tune it, it still wont last.

Your asking a 80whp-120whp motor to make double or triple what it came with from the factory.

Dont believe everything on Honda-Tech or on the internet.

[Big J]

Dont believe everything on Honda-Tech or on the internet.

you just shattered all my hopes and dreams

[B18c1Turboed]

Anyone LOCALLY that has made over 350whp BLOWS UP. They arent made to last. I only know what i have seen and tried.


Dont believe everything on Honda-Tech or on the internet.

Mike,if you dont read it or see the car, Dont belive it hasnt been done, there is a certain d series making over 350Hp locally.He has been making that power for over a year.

[Vteckidd]

Mike,if you dont read it or see the car, Dont belive it hasnt been done, there is a certain d series making over 350Hp locally.He has been making that power for over a year.

STOCK BLOCK?

ok there is 2 out of a million

[JDMjoe]

D-series is just a waste of money, b-series power can be obtained with less money D< B

[LSTurboHatch]

D-series is just a waste of money, b-series power can be obtained with less money D< B

haha....
gsr swap=2500=163whp.
boosted d setup=2500=300horse.
who wants to do the math....

i own both a b and a d. gsr's cost around 1200 for just the engine. i can build a d-series bottom end for 1000. i would much rather blow up a d-series and replace it than blow up a b-series.

[daddij]

haha....
i can build a d-series bottom end for 1000. i would much rather blow up a d-series and replace it than blow up a b-series.

he is so fucking right

[-S Double C-]

Rota92 on h-t made 568 HP Single Cam @ 34 psi. His dyno chart






D16z6
GT3567R .82
34 psi
Dynapack dyno

Rota92's car is sick runs 9.1's I bought his old Head package from that setup.. with his RLZ Head he made 585whp. And to the fool who said not a bad way to spend 10 grand he actually has right at 5 in motor and stuff.

[qwick]

Depending on how much you spend it is possible to get 600-700 hp out of a fully built and tunned SOHC honda, but that cost mucho denaro(sp?)

[-S Double C-]

Depending on how much you spend it is possible to get 600-700 hp out of a fully built and tunned SOHC honda, but that cost mucho denaro(sp?)

honestly i could make that kinda power with about 800 more in my setup for sleeves but i dont want that much. My EF will weighs around 1300-1500 without the motor so 500-550whp is more then enough. I actually know some with a built and sleeved d16 block for 1500 shipped i thought about getting for a back up.

[B18c1Turboed]

Rota92's car is sick runs 9.1's I bought his old Head package from that setup.. with his RLZ Head he made 585whp. And to the fool who said not a bad way to spend 10 grand he actually has right at 5 in motor and stuff.

He did not run 9.1 he ran high more like 9.7s wich is still impressive,But nowhere near 9.1 theres only a few cars that have ran that and he wasnt one of them...

Just to clairfy it was a 9.85 @ 145 - SOHC
And the car also has wheelie bars and is a Hot Rod car, that means pure drag car!

[Da_unknown]

^^^now thats some sick shiy right there

[SoLJames95]

Not a bad way to spend 10,000.

[RBS]

Full Race had a single cam D that put out 500+ hp with stock sleeves

[bernard]

Full Race had a single cam D that put out 500+ hp with stock sleeves

460 on stock sleeves but built bottom end. For a cheaper setup for the sohc. Run the vitara pistons and scat rods. And good rings. and block guard. Ported and polished head. Your good for some good numbers. The rest depends on you. Turbo kit, injectors exhaust. All has life in your hp numbers. Good luck on your decision.