watch the guys left thumb it looks like hes layin on horn like hes spraying the whole time. the supra may not be tuned so hes not on it hard and the supra guy in smiling the whole time. there is a big difference in the last race supra pulling hard!

this only has 257 to the wheels and look at his mod list


K20a2 (type-s head )
Port & Polish stage 2 (flow bench 300CFM)
Crower stage 2: 3/4 Race Cams
Crower Stainless Steel Valves: Exhaust (30.5mm)
Crower Stainless Steel Valves: Intake (35.5mm)
Crower Valve Springs & Titanium Retainers
ITB TWM inductions 50 MM
Peak and hold injectors 660cc
Hondata Gasket

SSR RACE HEADERS
Stainless steel Mandrel Bent 3inch exaust line
Apexi Turbo Muffler

K24a1 (CRV Base )
Machined block with oil jet squirters
Crower Maxi-Light Rods: K24A1
CP Pistons 12:5 -1

Tranny 6 speed
Exedy Organic Clutch stage 2
Exedy Light Weight Racing Flywheel 9lb
DC5 Type-R LSD ATS
Neuspeed short shifter

built K24 w/ type s head race cams ITB. it would be hard to get more HP from a N/A street car. K 20s are bad ass!

http://forums.clubrsx.com/showthread...&highlight=K24

if you go to this guys page and watch the frist video it shows a k20 EG beating a EVO. on 22psi.

http://profile.myspace.com/index.cfm...endid=46135563