there was one tuned not long ago with only a kb2.8 @20psi, jlt intake, longtubes, dual stock gt500 pumps and he made 850rwhp, i would guess his limitations are because of the stock fuel pump. good kill either way thoughOriginally Posted by Lankhoss
![]()
there was one tuned not long ago with only a kb2.8 @20psi, jlt intake, longtubes, dual stock gt500 pumps and he made 850rwhp, i would guess his limitations are because of the stock fuel pump. good kill either way thoughOriginally Posted by Lankhoss
![]()
2006 mustang gt
gears
bolt-ons
Is that on pump, pump + meth or race fuel? A lot of people dont want to deal with race gas or meth injection. I dont know of any smallblock cars making 850 on pure pump and no nitrous.Originally Posted by onebadgt
It does seem that most vid's Ive seen of those cars on the street are a bit disappointing. Ive seen some fast ones at the track on slicks, but on the street I just dont see them running that impressively for the power and cost (and hype.)
Last I thought that GT500 made more than that... On a side note you guys have to understand how TIM tunes those Blower cars.. The inlet temps start going up and it will pull timing.. Lets not forget that those blowers get hot quick..lol.. If I was to guess that car in the race was in the 500 to 550 range, with that GT500 being a tank that might explain getting drug down the road...lol..
![]()
Originally Posted by 1civic
Glad I'll never have to worry about that again.![]()
Why dont the SC stangs put a small shot on there to compensate for this heatsoaking issue?
H/C C6
500rwhp & 457rwtq
Originally Posted by LEAVINU
Tuners.... I said something when I worked at Modular about running NOS or Meth to cool the inlet temps, I only know of one car from Modular with Meth.. Its a Mach 1 and a 1.7 KB... Its a really good idea but Tim does not like the idea cause there is really no fail safe w/meth.. I'm sure if the idea keeps floating around the shop they will end up doing more to cool the blower down..![]()
lightspeed, you were right about the race fuel being used to make those numbers on the GT500.. Here is the link... http://www.kennebell.net/media/articles/TooMuch.pd f
If that link^^ dont work then go here, just scroll down and you will see the gt500.. http://www.kennebell.net/media/media-home.htm
I wonder which car that is? Hmm, I need to find him.Originally Posted by 1civic
They have more tools to help with that now that can pull boost and or timing if they system doesn't activate.
2003 Mach 1
Originally Posted by blackbeast99
Yeah, you need to race him I heard he should be driving an automatic cause he shifts gears like a grandma
The funny thing is that the efficiency of the GT500 set-up.... There is one thing to do X horsepower at the dyno and then see the GT500 in a real life senario.![]()
Also I will bet anything that Lankhoss car will come 150lbs short if we put the 2 cars in a scale...![]()
Rafa.
TRM Stage 2 │TRM Coilovers │ TRM Pistons │ TRM Blowthrough Tuning │ TRM MAF & Injectors │ Watch My Crazy Videos
I am sure it will be more than 150lbs. Knowing that the GT500 weighs in at like 3825lbs. Lankhoss vette is nice though, when I get my new car maybe we can run.Originally Posted by RJ's325ITS
Resize sig area!
Thanks guys,
That GT500 was probably closer to 4,000 lbs with those 20" wheels. They're 3850 or 3920 depending on the options (stereo setup, etc).
I think he was making ~640 on the street dyno that night - considering how Brad and Thrust seemed to be pretty even with Thrust's ~605 RWHP and the '03/'04 weighs 3665 lbs. That's a pretty significant difference in weight - takes a lot of HP to still hang with that ~335 lbs extra.
Tim does tune so the ECU starts pulling timing a bit sooner than a lot of other tuners, I believe it's 130* F for Tim and usually 150* for most others, including mine.
I think Brad weighed in at 3110 on the scale at Reynolds - the catted X-pipe and headers saved some weight - forget what fuel load that was with.
There you have it.... the extra HP of the GT500 didn't help, but the efficiency of the raw N/A power over power the FI set-up.Originally Posted by 03CobraAV8R
501whp / 3110Lbs = 0.161 ratio
Vs.
640whp / 4000Lbs = 0.16 ratio
I think the GT500 had to be over 4000 or Lankhoss car is lighter.![]()
TRM Stage 2 │TRM Coilovers │ TRM Pistons │ TRM Blowthrough Tuning │ TRM MAF & Injectors │ Watch My Crazy Videos
that was on pure pump, the car ran 9.70s at low 140s if i remember right, ill try to find the article on it.Originally Posted by lightspeed
2006 mustang gt
gears
bolt-ons
Originally Posted by lightspeed
I'm almost sure Kenny Bell made 800whp on 93... It was in a Mag not to long ago...![]()