Results 1 to 25 of 25

Thread: 1992 accord

  1. #1
    FREE BUJU StarBwoy's Avatar
    Join Date
    Feb 2007
    Location
    IDK
    Age
    33
    Posts
    1,920
    Rep Power
    20

    Default 1992 accord

    my accord wont start it turn over but wont run can i have sum advice on it plzit would help thanks.


    my dads said it the distributor but hes not sure

  2. #2
    General Tech Hater
    Join Date
    Aug 2005
    Age
    40
    Posts
    1,935
    Rep Power
    22

    Default

    Quote Originally Posted by jdmcivcc View Post
    Hey guys, my Honda Accord won't start. The starter turns the engine over, but it does not actually run. Could someone please help me with some ideas on what could be wrong? Please help.

    Also my father said it could be the distributor, but he is not quite sure.
    This is pretty broad man. You're going to need to check a host of things. Have you checked it for spark at the spark plugs? Have you checked to make sure the main relay is sending a signal to the fuel pump? Have you checked to make sure the fuel pump is operational?
    Official "Delete the clubs/crew section of IA" Member #1


    Quote Originally Posted by chouston86 View Post
    So this is how it goes down when I beat you I want the cash and the respect. To some people thats more important. Sounds familiar?

  3. #3
    B-Town Crunk Force
    Join Date
    Aug 2008
    Location
    Statesboro, GA
    Posts
    1,375
    Rep Power
    20

    Default

    Check for spark.


    Check for fuel.


    Post back.


  4. #4
    FREE BUJU StarBwoy's Avatar
    Join Date
    Feb 2007
    Location
    IDK
    Age
    33
    Posts
    1,920
    Rep Power
    20

    Default

    i check the spark and the fuel is great .but i found a video on how it sounds http://www.youtube.com/watch?v=qK3PByIs7nw

    timing belt!

  5. #5
    buy me some STP octane booster whatever210's Avatar
    Join Date
    Aug 2006
    Location
    MCD
    Age
    37
    Posts
    1,692
    Rep Power
    0

    Default

    have you pulled the valve cover off yet?

  6. #6
    FREE BUJU StarBwoy's Avatar
    Join Date
    Feb 2007
    Location
    IDK
    Age
    33
    Posts
    1,920
    Rep Power
    20

    Default

    Quote Originally Posted by whatever210 View Post
    have you pulled the valve cover off yet?

    yep but im going to check again

  7. #7
    B-Town Crunk Force
    Join Date
    Aug 2008
    Location
    Statesboro, GA
    Posts
    1,375
    Rep Power
    20

    Default

    Quote Originally Posted by jdmcivcc View Post
    yep but im going to check again

    What? lol


  8. #8
    Senior Member | IA Veteran
    Join Date
    Jul 2007
    Location
    Not on IA Anymore !!!!!
    Posts
    17,879
    Rep Power
    0

    Default

    take the oil cap off and spin the motor over if the valve train is not moving timing belt!!!!! then head work!!!!

  9. #9
    FREE BUJU StarBwoy's Avatar
    Join Date
    Feb 2007
    Location
    IDK
    Age
    33
    Posts
    1,920
    Rep Power
    20

    Default

    Quote Originally Posted by ASE*Tech View Post
    take the oil cap off and spin the motor over if the valve train is not moving timing belt!!!!! then head work!!!!

    ok i will be doing this

  10. #10
    Senior Member DustnU's Avatar
    Join Date
    Apr 2006
    Location
    I'm on a boat!!
    Age
    41
    Posts
    2,256
    Rep Power
    23

    Default

    I had one that did the same thing, Igniter inn the Dizz was bad thats it. $40 and it ran like a champ. Try that.
    Work in progressneed slicks!

  11. #11
    Senior Member
    Join Date
    Jun 2006
    Age
    43
    Posts
    1,133
    Rep Power
    21

    Default

    Do a compression test.

  12. #12
    Barefoot Motorsports
    Join Date
    May 2003
    Location
    jonesboro
    Age
    42
    Posts
    7,939
    Rep Power
    36

    Default

    fuel air spark compression what are u missing.


  13. #13
    FREE BUJU StarBwoy's Avatar
    Join Date
    Feb 2007
    Location
    IDK
    Age
    33
    Posts
    1,920
    Rep Power
    20

    Default

    Quote Originally Posted by DustnU View Post
    I had one that did the same thing, Igniter inn the Dizz was bad thats it. $40 and it ran like a champ. Try that.

    tell me more

  14. #14
    IA Member d00d's Avatar
    Join Date
    Jul 2009
    Location
    macon,ga
    Age
    37
    Posts
    134
    Rep Power
    17

    Default

    I would check compression, and timing belt. Most of the time its air, fuel, or spark. Always check the big 3 first.

  15. #15
    Certified Gearhead
    Join Date
    Feb 2008
    Location
    griffin
    Age
    51
    Posts
    932
    Rep Power
    0

    Default

    i had one do that on me and it was my main fuel relay

  16. #16
    FREE BUJU StarBwoy's Avatar
    Join Date
    Feb 2007
    Location
    IDK
    Age
    33
    Posts
    1,920
    Rep Power
    20

    Default

    o ok

  17. #17
    desde lejos.... Franco Tirador's Avatar
    Join Date
    Aug 2006
    Location
    hang a left, make a right and you're there
    Age
    40
    Posts
    2,712
    Rep Power
    23

    Default

    it may be the distributor the o ring went bad on my 93 accord so oil went in the distributor, just get another dist

  18. #18
    FREE BUJU StarBwoy's Avatar
    Join Date
    Feb 2007
    Location
    IDK
    Age
    33
    Posts
    1,920
    Rep Power
    20

    Default

    i will be checking that ^

  19. #19
    @ballengine ballistic08's Avatar
    Join Date
    Jul 2007
    Location
    Grayson, Georgia
    Age
    35
    Posts
    227
    Rep Power
    19

    Default

    Quote Originally Posted by ASE*Tech View Post
    take the oil cap off and spin the motor over if the valve train is not moving timing belt!!!!! then head work!!!!
    if its an interference engine this is a bad idea

  20. #20
    Senior Member
    Join Date
    Mar 2005
    Age
    43
    Posts
    2,071
    Rep Power
    24

    Default

    need to check to see if its sparking, if it is then you need to check to see if the fue pump is turning on. if its not then try replacing the main relay.
    About to approach beast mode

  21. #21
    Senior Member DustnU's Avatar
    Join Date
    Apr 2006
    Location
    I'm on a boat!!
    Age
    41
    Posts
    2,256
    Rep Power
    23

    Default

    Quote Originally Posted by ballistic08 View Post
    if its an interference engine this is a bad idea
    No it's not!!!! Your not gonna spin it backwards.
    Work in progressneed slicks!

  22. #22
    @ballengine ballistic08's Avatar
    Join Date
    Jul 2007
    Location
    Grayson, Georgia
    Age
    35
    Posts
    227
    Rep Power
    19

    Default

    Quote Originally Posted by DustnU View Post
    No it's not!!!! Your not gonna spin it backwards.
    if its an interference engine and you turn it over with a broken timing belt then you're gonna bend valves.

  23. #23
    buy me some STP octane booster whatever210's Avatar
    Join Date
    Aug 2006
    Location
    MCD
    Age
    37
    Posts
    1,692
    Rep Power
    0

    Default

    Quote Originally Posted by ballistic08 View Post
    if its an interference engine and you turn it over with a broken timing belt then you're gonna bend valves.
    it is and he can get lucky like i did when my h22 snapped timing belt while driving and bent no valves. did a compression test and it was all good.

  24. #24
    @ballengine ballistic08's Avatar
    Join Date
    Jul 2007
    Location
    Grayson, Georgia
    Age
    35
    Posts
    227
    Rep Power
    19

    Default

    yeah he could get lucky. but its a good chance hes got valves open and they will bend if he turns that over, but I guess its up to him if he wants to buy new valves and a valve job.

  25. #25
    buy me some STP octane booster whatever210's Avatar
    Join Date
    Aug 2006
    Location
    MCD
    Age
    37
    Posts
    1,692
    Rep Power
    0

    Default

    Quote Originally Posted by ballistic08 View Post
    yeah he could get lucky. but its a good chance hes got valves open and they will bend if he turns that over, but I guess its up to him if he wants to buy new valves and a valve job.
    thats exactly what i did and i got lucky as well. i was like holy shit i got lucky as fuck lol

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!