Originally Posted by ASE*Tech take the oil cap off and spin the motor over if the valve train is not moving timing belt!!!!! then head work!!!! if its an interference engine this is a bad idea
need to check to see if its sparking, if it is then you need to check to see if the fue pump is turning on. if its not then try replacing the main relay.
About to approach beast mode
Originally Posted by ballistic08 if its an interference engine this is a bad idea No it's not!!!! Your not gonna spin it backwards.
Work in progressneed slicks!
Originally Posted by DustnU No it's not!!!! Your not gonna spin it backwards. if its an interference engine and you turn it over with a broken timing belt then you're gonna bend valves.
Originally Posted by ballistic08 if its an interference engine and you turn it over with a broken timing belt then you're gonna bend valves. it is and he can get lucky like i did when my h22 snapped timing belt while driving and bent no valves. did a compression test and it was all good.
Forum Rules