Quote Originally Posted by D15B
uhmm my wiring harness has 4 red wires and a yellow wire female side and 4 black wires and a red on male male connects to the resistor box what exactly did you say to do? what i saw on rewyre was to just block off the current with a plug
also i think your correct that is a z6 dizzy i see how that would not bolt up now lol like i said i r noob at sohc

oh and i was wrong its a p05 ecu not p07
Let's say on the resistor box side of the plug you have 4 black wires running into the resistor box, and one red wire. Cut all of the wires off that run into the resistor box. Connect the one red wire to all of the 4 black wires. That will eliminate the resistor box.

The P05 is equally as shitty as a P07 ecu for that engine. It is a 1 wire o2 ecu that is for a 70 hp 8 valve non VTEC engine. Try to get a P28 if possible. Your engine will run terrible with that P05.