Results 1 to 19 of 19

Thread: injectors wont fire 1990 civic si

Hybrid View

  1. #1
    Certified Gearhead
    Join Date
    Jul 2006
    Age
    40
    Posts
    161
    Rep Power
    21

    Default

    alright that makes sense i used an obd 0 male plug and i wired it up accordingly to the obd 1 dizzy only one wire is diff color the big white goes to yellow blue or something like that but im going to try the resistor box tommarow and hook up a p28 ill keep this thread updated tommarow.i got the 4 wire o2 plug aldo thanks

  2. #2
    Certified Gearhead
    Join Date
    Jul 2006
    Age
    40
    Posts
    161
    Rep Power
    21

    Default

    Quote Originally Posted by D15B
    - Remove the resistor box and wire the one red wire to the 4 black wires
    uhmm my wiring harness has 4 red wires and a yellow wire female side and 4 black wires and a red on male male connects to the resistor box what exactly did you say to do? what i saw on rewyre was to just block off the current with a plug
    also i think your correct that is a z6 dizzy i see how that would not bolt up now lol like i said i r noob at sohc

    oh and i was wrong its a p05 ecu not p07

  3. #3
    Don Mon SiRed94's Avatar
    Join Date
    Feb 2006
    Location
    Morrow 30260
    Posts
    3,323
    Rep Power
    26

    Default

    Quote Originally Posted by D15B
    uhmm my wiring harness has 4 red wires and a yellow wire female side and 4 black wires and a red on male male connects to the resistor box what exactly did you say to do? what i saw on rewyre was to just block off the current with a plug
    also i think your correct that is a z6 dizzy i see how that would not bolt up now lol like i said i r noob at sohc

    oh and i was wrong its a p05 ecu not p07
    Let's say on the resistor box side of the plug you have 4 black wires running into the resistor box, and one red wire. Cut all of the wires off that run into the resistor box. Connect the one red wire to all of the 4 black wires. That will eliminate the resistor box.

    The P05 is equally as shitty as a P07 ecu for that engine. It is a 1 wire o2 ecu that is for a 70 hp 8 valve non VTEC engine. Try to get a P28 if possible. Your engine will run terrible with that P05.


  4. #4
    Certified Gearhead
    Join Date
    Jul 2006
    Age
    40
    Posts
    161
    Rep Power
    21

    Default

    yea i know itll run like shit for the time being but shit i jnust want to see it start also i was gone ask can a non vtec dizzy fit in the head of a vtec motor just a question i was wondering?...........ok i did the resistor box wiring and still no start this shit is rediculas lol..im also thinking maybe it wont star because maybe the map sensor is bad but im not throwing a check engine for it
    Last edited by D15B; 07-03-2009 at 04:07 PM.

  5. #5
    Certified Gearhead
    Join Date
    Jul 2006
    Age
    40
    Posts
    161
    Rep Power
    21

    Default

    all right its puddering every now and then but a small amount of smoke is coming out of the intake manifold and it smells like gas i may have to invest in new spark plugs and wires im thinking any suggestions

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!