Results 1 to 31 of 31

Thread: DIY: Mothers Clay Bar System...

Hybrid View

  1. #1
    Rock the 40oz GTScoob's Avatar
    Join Date
    Mar 2005
    Location
    GA Tech
    Age
    40
    Posts
    2,717
    Rep Power
    23

    Default

    ^^^ Good writeup, although I normally wash top to bottom, starting at the roof and working down. That way the dirt from the top washes down the car and then gets washed away later. If the bottom is clean then junk from up high will rinse down over the clean sections of paint.
    02 WRX Sport Wagon


  2. #2
    www.jasontbarker.com speedminded's Avatar
    Join Date
    Nov 2003
    Posts
    22,589
    Rep Power
    53

    Default

    Quote Originally Posted by GTScoob
    ^^^ Good writeup, although I normally wash top to bottom, starting at the roof and working down. That way the dirt from the top washes down the car and then gets washed away later. If the bottom is clean then junk from up high will rinse down over the clean sections of paint.
    Washing from top to bottom prevents you from knowing what has been washed and what hasn't because of all the run-off covering what you haven't washed yet...almost always guaranteed to have a missed spot or two, you know those little dirty triangles only discovered once the car is dry.

    If the car was properly washed then everything will be removed with the rinse anyways.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!