Results 1 to 4 of 4

Thread: tranny go shake shake shake!?!

Hybrid View

  1. #1
    F.T.W.K.T.A.
    Join Date
    Dec 2006
    Location
    Dalton
    Age
    39
    Posts
    716
    Rep Power
    20

    Default tranny go shake shake shake!?!

    ok like the title says i need BIG help with a tranny problem.. my tranny will not go into gear and when i can force it into gear the whole car shakes until i start to go.... i have had some one tell me it was my clutch not releasing there for my release bearing was the problem and someone else told me my shift forks were bent/warped, and another said my pressure plate diaphram springs took a dook.. it also started then i changed my clutch and pressure plate. i changed the pilot bearing but reused the release bearing.... i also looked at my release fork and it seams to be crooked...... any help before pull/drop the whole engine/tranny to take-a-look-C. thanx in advance to the people who are able to help, whatever info is much ablidged

    94 civic Dx 4dr - N/A Ls/Vtec
    94 Del Sol Si - Project O'SH is GO!!!
    91 Accord Lx - Totaled

  2. #2
    Just another ricer
    Join Date
    Apr 2007
    Location
    Pennsyl-fuckin-tucky ya'll
    Age
    41
    Posts
    1,487
    Rep Power
    20

    Default

    Quote Originally Posted by kain86
    ok like the title says i need BIG help with a tranny problem.. my tranny will not go into gear and when i can force it into gear the whole car shakes until i start to go.... i have had some one tell me it was my clutch not releasing there for my release bearing was the problem and someone else told me my shift forks were bent/warped, and another said my pressure plate diaphram springs took a dook.. it also started then i changed my clutch and pressure plate. i changed the pilot bearing but reused the release bearing.... i also looked at my release fork and it seams to be crooked...... any help before pull/drop the whole engine/tranny to take-a-look-C. thanx in advance to the people who are able to help, whatever info is much ablidged
    Shift forks..lol..AKA Non moving parts unless your actually shifting it. Deffinetely not the issue.


    What Kind of trans is it?? Whats it go in?

    I could see it being a bearing you didn't change. However, did it do this before you replaced the clutch? If not, you may have peckered something up in the change. Possibly bent the fork and its riding on the clutch and forcing it to wobbble. If thats the case its going to ultimately ruin a lot of $ worth of shit. Your you could've gotten a defected bearing (the one you replaced)

    Was there anything else you might have done that would cause this?
    90% of teens say "oh shit" before a wreck. The other 10% are from Pennsylvania, they say " hold my beer and watch this shit."
    EvasiveEF9: Just fill me in...if it's black, I'm all over it...

  3. #3
    F.T.W.K.T.A.
    Join Date
    Dec 2006
    Location
    Dalton
    Age
    39
    Posts
    716
    Rep Power
    20

    Default

    it's a s20 d-series tranny, and it only does it when the car is on and i try to shift into gear

    94 civic Dx 4dr - N/A Ls/Vtec
    94 Del Sol Si - Project O'SH is GO!!!
    91 Accord Lx - Totaled

  4. #4
    F.T.W.K.T.A.
    Join Date
    Dec 2006
    Location
    Dalton
    Age
    39
    Posts
    716
    Rep Power
    20

    Default

    ok new revalation i just tried to go to work...... before i started the car i was able the shift through the gears no problem, so i tried to start it in first gear... the car started shook then shut off so i started it again but in neutral, then tried to get it to go into gear and it was like trying to push through a concrete wall, so now it's down to release bearing and pressureplate, if it's the pressure plate does anyone know where to get a stage 3 pressure plate only and not a whole kit.

    94 civic Dx 4dr - N/A Ls/Vtec
    94 Del Sol Si - Project O'SH is GO!!!
    91 Accord Lx - Totaled

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!