serious problem

[2.0civic]

plus theres no reason yet to take cams out anyway if all your doing is a headgasket

[SLow_POke]

liek he said lossen the T or honestly wait for some one to give you a hand if you cant take to a shop.

but if you insist on DIY, buy the manual. and dont warpt he head when your taking it off. carefull on setting the timing belt when your all done .(might as well replace it )

and BUY the manual.

[SLow_POke]

http://www.hondatuningmagazine.com/t...k_timing_belt/

hsould help you out IF IT DOESNT DO NOT! CONTINUE and go to a shop

[RB25DET240sx]

Or you can just take the all the bolts that hold the head down out then turn the head up on the back end and slide the belt off and replace head gasket then do reverse to put it all back together. thats what i did when i replaced my piston rings.