Closed up both holes with a little tlc from a nice sized hammer and dolly.
Before
And after
Here it looks like someone pinged the tail lamps on purpose, its the same on both sides.
More Ghettofab stuff, ford 6x9s all the wayy around
Also picked up a set of protege 15s from 1991, with decent tires. had a little rash from the curbs and decent tires, for 100$
Build update
More Ghetoofab Stuff
Looks to be an oem muffler off of a full size sedan with a z8. ill have to get a sound bite up just to let you guys listen to it. no coffee can or weed eater sound here, though it was welded on to the oem end muffler tube, it was held up by wire and a cut oem bracket... at leat they put new rubber hangers on there.
Air filter was duct taped on.. well with electrical tape.
Engine and bent core support.
The core support was bent in on the passengers side from what looks like an impact from a parking meter.... it will need to be replaced... but i have to pull it out for now to get the left and right sides re aligned. it was nocked in about 4 inches on top next to the head light and about 7 inches in where the far passenger rad support is.
And finally, the wheels. They came off the mazda protege (1991). i assumed they were oem. they arent. they are a Prime 15x7 4x100 and have humongous tires (195/60/15) which make the car sit even higher.
going junkyarding tomorrow. have o pick up some stuff for a delsol and ek build for a guy in Marietta.
Posting Permissions
Reply With Quote
