I've notice alot of tuners much rather build b and d series than the h series. Why is that? Dont get my wrong i LOVE any honda motor, but it seems b and d are more favorable.
Proper valve job(not porting) will pick up power in a stock block?
yes. Most OEM bottom end builds dont have enough compression to push a good ported head. THats why a valve job will get you more power.
Power is in the valve job. These theories and advice can be used with the H series as well. The H series are even more simple than B series. you can do stock Bottom ends with Cams, an a header an hit 200-210whp. Hell, Goinfasterthanu has a STOCK H22 with a DC Header that makes 193whp
while i appreciate your input kevin, i have not seen proof that those EBAY headers make the same power as the DC Header. The DC uses bigger primaries, most of the headers i have seen of yours or EBAY style arent quite the same.
Im listing PROVEN name brand products, until i see a PROVEN ebay company, im leaving it out. You get what you pay for
great write up +1. mike i got a write up ive been compiling for about a week that im going to post later tonight but ill let you scope it out when i get it complete
I've looked at a lot of Honda heads while hanging out and various shops and the one thing that I've noticed about most of the heads that made good power is that they have had very little material actually removed. Somebody didn't just go in and go buck wild with a grinder.
vBulletin Message