Project D series Build is under way!!

[crxsiguy]

whats up all! well i thought I would post up some pics of my build im doin, I've had b16 b18c b17a and so on but i wanna do something different so i thought i would do a single build! so heres a couple shots of whats to come...Enjoy!!

Eagle Rods and Vitara pistons

Clutchmaster Stage 3 clutch and lightened flywheel

Skunk 2 Camgear

Turbonetics T3/T4 60 trim

Turbonetics Deltagate 2

theres alot more stuff but you get the idea im goin for 350 whp or so in a D16z6. Also i will be taking pics of the actuall build it self and update this thread so let me know what yall think..
Thanks for reading

:Update: Well i got everything all torn down and hopefully it will hit the machine shop sometime this week and get this thing done! here are a few pics of the progress so far ...

[Tank]

uh oh look out halfwit

[Slowboy]

sweet man vitara's FTW

[Elbow]

cool, d series ftw

[aaronfelipe]

no vtak ftw

[crxsiguy]

no vtak ftw

D16Z6 = SOHC VTEC lol, but thanks guys, I'll post up some pics of the head build also

[aaronfelipe]

lmao i thought i read d16a6= no vtec

[crxsiguy]

lmao i thought i read d16a6= no vtec

lol im not bold enough to try a non vtec SOHC build, eventhou single cam vtec doesnt really count lol

[crxsiguy]

No love for the D series...

[1SwollDude]

mikes really doin it...good luck with it yo

[EJ_Allmota]

Good luck homie.. Vitara's is where is @ for a SOHC.. Im thinkin about buildin a SOHC myself..

[green91]

I dont understand going through a build and still using cast pistons, but GL with the build! D-series def. have alot of potential. I enjoyed mine for a long time.

[HeLLo iM iZzY]

Halfwit best watch out, y0 !

[CHADbee]

halfwit is gonna get PWN3D!!!!!!!!!11111111

[crxsiguy]

halfwit is gonna get PWN3D!!!!!!!!!11111111

but thanks guys, hopefully it should be done by newyears or around that time, lol

[Halfwit]

uh oh look out halfwit

i aisnt worried

Halfwit best watch out, y0 !

i run the d-series game around here

halfwit is gonna get PWN3D!!!!!!!!!11111111

impossible

CRXSIGUY- U KNOW THIS MEANS WAR

on the side note, ive heard good things from vitaras, and that is a big turbo,but

we gone race!

i must have fastest d series. and i will.

[crxsiguy]

i aisnt worried


i run the d-series game around here


impossible

CRXSIGUY- U KNOW THIS MEANS WAR

on the side note, ive heard good things from vitaras, and that is a big turbo,but

we gone race!

i must have fastest d series. and i will.

LoL I'm down for a race, but its gonna have to be on the track but its always good to have a friendly rival! And i think im gonna have to have the Fastest single cam y0! i might just have to up my goals 400WHP y0!!

[OG-Skinny]

Mike, hate to bust your bubble, but Your Vitara Piston's won't hold 350+ for long.

Should of just went ahead and got aftermarket pistons. Good thing is that the D-series sleeves are strong.

I'd suggest a A6 bottom end and a Z6 head.

[crxsiguy]

well if it blows up, it wont cost but maybe a grand to make it better than it weas before so im not too worried about it, but i have seen alot of high HP Vitara builds that have been around for a while so we will see

[OG-Skinny]

p.s.. I know a few D-series tricks myself. I could make some power with a A6/Z6 combo.

[green91]

i call BS on skinny

[Halfwit]

LoL I'm down for a race, but its gonna have to be on the track but its always good to have a friendly rival! And i think im gonna have to have the Fastest single cam y0! i might just have to up my goals 400WHP y0!!

track is fine. be ready top get pwnered

[SoLJames95]

Thats right me Half Wit know whats going down Try a D15 B7. Half Wit knows. I will build and will conquer. I got yo back D Series FTW.

[ranj]

so how long u thinking this will last.
just so you know this isn't a smartass question i'm serious i would like to know for my own personal reasons lol
gl with build

[£G2♣]

k series FTW

[5spdfrk]

Good luck mike!

[seksehowy]

wow how much was that t3/t4 turbonetic?

[Halfwit]

Mike, hate to bust your bubble, but Your Vitara Piston's won't hold 350+ for long.
Should of just went ahead and got aftermarket pistons. Good thing is that the D-series sleeves are strong.

I'd suggest a A6 bottom end and a Z6 head.

WRONG. its all about tuning/ stup.
----------------------------

93 civic sedan
stock z6 head, im, cam, tb
y8 block, arp studs, vitara pistons, eagle rods
drag manifold (oldstyle)
ssauto wastegate 7psi spring, dump into drivers fender
t3/t4 57 trim .60/63 stage 3 wheel
3"dp, 2.5" test pipe, 2.25 Apexi exhaust
2.5" ic pipes, 30x12x3 eaby ic
hks ssqv bov
greddy catch can (modded to vent design)
motorola 2.5bar map sensor
presiscion 750cc injectors
ebay dual stage boost controller (7psi low, 25psi high)
crome pro fuel management
z6 tranny
obx lsd
clutch masters stage 4 clutch
16" Rota sub-sero's in gold, 205/45/16 bf-goodrich g-sports
kyb agx struts, skunk2 coilovers
del sol vtec front sway bar, gsr rear sway bar

405 hp / 314 ft-lbs

----------------------------------

heres a vid, racing, track, dyno. hes been running it FOR A WHILE.

http://turbod16.com/viewtopic.php?t=28996

[Halfwit]

so how long u thinking this will last.
just so you know this isn't a smartass question i'm serious i would like to know for my own personal reasons lol
gl with build

D series are reliable when turboed ALL COMES DOWN TO TUNING.

[SoLJames95]

I 2nd that. I have a 1.5 Vtech Turboed that I have been running for 6 months at 10 psi
I havent had a problem. DAILEY DRIVER!!!

D15B7 (JDM)
Garrett T-25
Stock Internals
450 cc injectors
Chipped ECU
Johnny Race Car Intercooler
Log Manifold
212WHP/194Torque

Tuning all done by Scottie at MSPI. Thats where you get the power is TUNNNNNNNING!!!!!!

Less Cash Its been Done To Much Cash
DSeries= BSeries= KSeries=

[ranj]

D series are reliable when turboed ALL COMES DOWN TO TUNING.

hey that's a pretty cool setup u got there.
how long have u been running that engine?

[SoLJames95]

6 months, Im fixin to rebuid it. Everybody does the 1.6 Iwanna do a 1.5. It ran a 13.8 in the 1/4 mile at 107 mph. Its quick. There real reliable. You thinkin about doin one. im going for a 325whp.

[Vteckidd]

The pistons wont hold past 350whp from what i have seen, an from what we have learned on halfwits motor, you will not see much past 300whp without a ported cylinder head an oversized valves.

the D heads run out of steam at 300whp. I have seen guys making over 300whp on simple setups, but i dont believe it, the turbo D series world is weird.

guys with stock motors, or Vitara pistons an STOCK heads make 400whp, then the next guy with a fully built an sleeved motor, ported head, cam, only make 350whp.

but still, that kind of power is still fun cause they make so much torque.

400whp i think is seriously out of reach without a crazy head

[Vteckidd]

WRONG. its all about tuning/ stup.
----------------------------

93 civic sedan
stock z6 head, im, cam, tb
y8 block, arp studs, vitara pistons, eagle rods
drag manifold (oldstyle)
ssauto wastegate 7psi spring, dump into drivers fender
t3/t4 57 trim .60/63 stage 3 wheel
3"dp, 2.5" test pipe, 2.25 Apexi exhaust
2.5" ic pipes, 30x12x3 eaby ic
hks ssqv bov
greddy catch can (modded to vent design)
motorola 2.5bar map sensor
presiscion 750cc injectors
ebay dual stage boost controller (7psi low, 25psi high)
crome pro fuel management
z6 tranny
obx lsd
clutch masters stage 4 clutch
16" Rota sub-sero's in gold, 205/45/16 bf-goodrich g-sports
kyb agx struts, skunk2 coilovers
del sol vtec front sway bar, gsr rear sway bar

405 hp / 314 ft-lbs

----------------------------------

heres a vid, racing, track, dyno. hes been running it FOR A WHILE.

http://turbod16.com/viewtopic.php?t=28996

run 25psi through anything an it will make good power, but it wont last long. i call bullshit on that too, thats prob that 4 door civic that was for sale. it must have been on a dynapack. So your telling me with a 2.25in exhuast, 2.5in test pipe, an a 7psi wg spring he did 400whp it must have been 1 time an spiked like a motherfucker. i dont see how you get 25psi from a 7psi spring

i just dont see him making over 400whp with a STOCK head, im and cam. But hes got a BIG ASS TURBO, so im sure his powerband is a nice 500rpms.

peak numbers isnt everything. halfwits doesnt make as much power, but it hits full spool FAST an holds, making it a fun an fast car

[ranj]

Mr. KiDD, how much boost can a stock d15b7 take safely? i don't know if you work with these motors often.

[Vteckidd]

1psi less than when it blows up.

ie if it pops at 19psi, turn it back to 18psi

any d series STOCK motor, no more than 10psi

[ranj]

1psi less than when it blows up.

ie if it pops at 19psi, turn it back to 18psi

any d series STOCK motor, no more than 10psi

thnx, cause i have recently been thinking about turboing my civic, but i had wanted to do a minime with a y8 head just so i can test out my new port and polishing abilities, but i don't know yet, i'm leaning a lil more on the minime side.
but sorry if i'm gettin off topic.
G/L with build.

[SoLJames95]

D15B7... Just wait Mike were going to break records. D Series Fury. I will build that motor and we will rule. I will make a name for D series and I will make 400 whp.... No matter what Mike. Sleeved, Pistons, Rods, ZC tranny, T3, BLOCKGUARD, TDF Crazy Manifold. We will DOMINATE!!!! Mainstream will be known for D Series Power HAHAHAH!!!! I have to sell my hatch first. Damn It.

[Vteckidd]

D15B7... Just wait Mike were going to break records. D Series Fury. I will build that motor and we will rule. I will make a name for D series and I will make 400 whp.... No matter what Mike. Sleeved, Pistons, Rods, ZC tranny, T3, BLOCKGUARD, TDF Crazy Manifold. We will DOMINATE!!!! Mainstream will be known for D Series Power HAHAHAH!!!! I have to sell my hatch first. Damn It.

when you figure out how to run a CABLE tranny in a HYDRO car seeing as their are no conversion kits for it, let me know

There are hydro zc trannys, but Full-Race had to make custom axles from DSS to get it to work properly.

youll need the biggest ballin head to support 400+whp, and i would def do a 1.6L. displacement is king

[OG-Skinny]

Vitara pistons won't hold 350whp for long at all.. it's cast aluminum. Not forged.

Highest WHP out of any SOHC XXXX D-series was a guy from UTAH.. 611WHP, top mount, t4, 82mm D16Z6 with a 1.7L crank, and 34psi. Guy spend a SHIT-TON of money on it.