http://go-autoworks-store.com/tuac.html
Or if you have a hydraulic shop close to you go there instead. It's a lot cheaper for them to build you oil lines than it is to buy them. Take the turbo with you so they can give you the correct fitting for it.
Also, you might should think about getting some ARP headstuds. It's a good investment.
Now for a turbo. If you're wanting to go big numbers, look at some holset turbos. You'll either find a rebuilt one or one that needs to be rebuilt but they're good turbos for making some good power for cheap.
http://go-autoworks-store.com/gosptubybupo.html This is also a very good turbo and I think you'll be happy with it.
If you decide to order anything from Go-Autoworks call and talk to the owner he's been extremely helpful to me. As he built my manifold, downpipe, intercooler piping, sold me my turbo wastegate bov radiator, fan, fan shroud, and a few other things also. He's a great guy.
If you have any other questions I'll try to help you. But make sure you don't cheap out on stock head bolts. Even if you pick up a used set of ARP head studs it'll be better than your stock headstuds.