Alright damnit i'm tired of these mushy brakes

[Sammich]

and i'm kinda thinking of redoing my whole brake system brand new all the way down to the booster and master cylinder....so yesterday i finally was able to replace my rear calipers...bled them properly until there was a steady stream coming out of them, the pedal was hard prior to starting the car up. i go to test drive it and damnit if the pedal doesnt go almost all the way down

wtf gives? i mean should i be bleeding all four corners since i replaced the rear calipers?

a little background as well i have been riding around w/ my calipers leaking for about a little over a week, having to constantly pop my hood, fill up the brake fluid, and the two days before i parked it, i was to the point to where i had to pump my brakes to get feeling, but then the pedal would slowly go down to the floor. i dont know if that has anything to do w/ my brakes going down so far now, but whats recommended? bleed all four? or should i just do as i'm thinking?!? any help is appreciated.

[mocha latte cupcake]

amazing... you're a tard. yes you should bleed the full system (i personally would)

[Sammich]

i would hijack haley and rape joy..jus sayin...thanks for the info eminem

[Supraboy87T]

My Ej had the same problem when I got it the brake pedal would slowly got to the floor. I bled all 4 corners and filled with new fluid. Problem solved at least in my case it was.

[88civic_hatc]

BLEED ALL OF THEM YOU TARD if it still goin to the floor you need a mastercylinder

[Supraboy87T]

Oops I forgot bout the master cylinder I had to replace that as well.

[speedminded]

1) Is it losing ANY fluid?

2) Was the entire system, all four wheels, bled starting at the furthest point from the master cylinder?

[ATL86]

x5 Not to beat it to death, but yeah bleed all four corners(RR-LR-RF-LF). If it still goes to the floor, replace the master cylinder.

[civicturbo10]

tru bleed all four...use a whole new bottle since your already going thru the motion. New fluid in the system feels very strong...

[Sammich]

1) Is it losing ANY fluid?

2) Was the entire system, all four wheels, bled starting at the furthest point from the master cylinder?

RESOLVED LOL

I BLED ALL FOUR CORNERS PER MAXIMA INSTRUCTIONS (REAR RIGHT, FRONT LEFT, REAR LEFT, FRONT RIGHT) ALL GOOD NOW FELLAS, THANKS

PS THIS THREAD CAN BE DELETED