Ok i just recently bought a b16a with Built Head. stage 2 comp cams, and all valvetrain done. Hytec rep header.
\How much more HP do you think the fully built head adds? thanks.
HP on built B16a
Ok i just recently bought a b16a with Built Head. stage 2 comp cams, and all valvetrain done. Hytec rep header.
\How much more HP do you think the fully built head adds? thanks.
hey
im not sure but i know you can get alot of power from a built headOriginally Posted by Black4DrEK
yea i hope. umm... anymore,,,,,,,,,,,,,,,??
maybe 10hp.. plus.. minus.. what kind of power you're looking for?
i atleast want to hang wit my boyz CTR.. probly 180-190 or sooo... i want to add CTR pistons as well
1.6L don't really make that much power unless you put a crap load $$$ into it which i see it's pointless but everyone have their own taste..it's hard to get 180-190 on a b16 but goodluck...
i know alot of b16 that make that + ..... but yea thankx,,, ANYONE POST UP your B16 HP.....!!!!
it's hard to get 180-190 on a b16 but goodluck...[/QUOTE]
Who told you that? Don't get mad but thats BS bro.
"Damn, Its Tyler"RaceReadyDevelopments
Lol yea its pretty expensive making that ,but what car is it going in? b16 work wonders trust me I kno.With the right stuff you can make that but its gone run you my friend has a stock b16 in a hatch.He eats type rs,and gsr,its weird that b16s and ls are under estimated
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
just what i heard but im not much of a b16 guy so i don't know to much but hey i learn as i go so there's no point of getting mad..
Who told you that? Don't get mad but thats BS bro.[/QUOTE]it's hard to get 180-190 on a b16 but goodluck...
hey a fully built b20vtec only broke 200+ and thats with skunk2 pro3 cams so dont expext that much from a b16
ONE DAY
Who told you that? Don't get mad but thats BS bro.[/QUOTE]it's hard to get 180-190 on a b16 but goodluck...
Sorry homie, but that's the truth. If you are building a motor for n/a, the worst motor (besides a d-series) is a b16. Fully built you "may" touch 180-190hp, but you're have about 115lbs of torque. If you were to put the same effort (if not less) into a 1.8 (or up), you would yield alot greater results.
*Original poster*
You will better off getting a 1.8L or 2.0L block and using your head.
That's kinda low?!?
Are you using a good header? What size exhaust are you running? Is you're motor high compression? Are you tuned? Those cams might not be the best for your setup, if you're not high compression.
Well it may not happen much, but my dads buddy has a civic hatch with a b16a n/a... running right at 205whp on the dyno with 110oct gas
"Damn, Its Tyler"RaceReadyDevelopments
Since your pops needs 110oct, I'm guessing he's over 12.1 c/r. If so, that car isn't a DD.
Yeah, its not a DD.... but every once in a while, my dads buddy will take it out on the streets.
"Damn, Its Tyler"RaceReadyDevelopments
don't get mad but i've told you..lol..jk.....
Who told you that? Don't get mad but thats BS bro.[/QUOTE]it's hard to get 180-190 on a b16 but goodluck...
ok thanks for yalls response. highly appreciated
You might make 150whp.
The EMPIRE
ok. you guys are puttin my whip together now by the way. thanks...
1.6L don't really make that much power unless you put a crap load $$$ into it which i see it's pointless but everyone have their own taste..it's hard to get 180-190 on a b16 but goodluck...
a stock obd0 jdm b16 makes 170...
keep the head, trash the block. enough said
ls vtec FTW
a stock obd0 jdm b16 makes 170...
Lol show me one
The EMPIRE
Stock, more like 130-140 WHP buddy.a stock obd0 jdm b16 makes 170...
Anywho back on subject, with that 'built head' and Hytech header you might make like 150-160 WHP.
at crank or wheels?????
lol not
Soon!!
B.S.- no "stock" b16 in a hatch(even gutted out) can pull a stock type-r
the only way the hatch would pull would be from a dig and it'll be in front for just a second or two cuz of the weight difference.
Someone lied to you my friend ran a type r .From a roll when ppl used to chill at Full throttle he walked on the type-r.The dude was mad as hell then he was like what ya got popped the hood and he saw a stock ass b16.So what are you talking about
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
^^^ its so funny seeing ppl talk about their stories and they own all. there could have been something wrong with the type r, ****ty driver, etc etc. there are soooo many variables. just because you saw a type r lose to a b16 one time, doesnt mean if you have a b16 hatch, it will beat a type r. if you look at the numbers and math involved, typically a stock itr will make 175whp + -. a b16 makes 140whp + -. take into account the weight difference of say 300lbs or so and you still have the type r winning. so mathematicaly, the type r would win. like i said, there are a lot of variables that come into play when comparing two cars.
to the OP, i would buy a gsr shortblock and use your head on it, that will yield much better results. then boost it
GCO Member
NRA Member
nah no one lied to me, i've had seat time with many type-r's, and if that was tru that the "stock" b16 hatch walked on a type-r, he had to have some internal work or prob just spray.
you are probably lookin at 155-165.I like tha b16.. im on my second one.they are deff. underestimated. Although they are quite torqueless.
97ek hatch
No spray it was a rebuilt b16.Type-R had test pipe and cams I dont know what Type-Rs run in the quarter.But alot of people say they arent that fast.From the ones I have seennah no one lied to me, i've had seat time with many type-r's, and if that was tru that the "stock" b16 hatch walked on a type-r, he had to have some internal work or prob just spray.waste of money unless you just love tegs.I would just get a gsr and drop that money in it.
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
yea true the b16 are torqless but thats why they came with the short geared trannies, it was about 2 years ago i had a b16 with the LS tranny, OMFG tht **** went no where!!lol
Patrick4588 yea there are many things that come into play but the Type-R was running strong.Alot of spinnage tho I dont know if yall feel the same way I do.But I have noticed that sum ppl that have alot of mods usually cant drive.So seems like they spend more money on there car to try to make up for the inexpirence.
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
+1 million hp
Heres a tip, DYNO IT AN FIND OUT
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
I beat it screamed down the highway tho.
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
why not?:
ITRs are mid 14 second cars!~ Just cause its a ITR doesnt means its god gift to VTEC.
stop benchracing, its easily possible for any swapped hatch to beat an ITR, even a b16.
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
you have STAGE 3 not PRO3 cams
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Then he has the highest whp b16 in the state, if not the country.
POSTA DYNO CHART or i call BS
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Posting Permissions
Reply With Quote
