Is that only the ground wire to the convertor? It looked like the wire from the convertor is combined with wiring going into the loom originally to me, which is why I said check it. However, if that is just twisted up and not connected to any other wire, then that is not. The other thing I would check is if the T-Taps possibly broke one of the stock wires and is no longer sending signal to the sub. Just disconnect the blue/red connector/tap and see if the wire is still connected. In the end, it could be 100 different things. I would call or take it by the original shop that performed the installation. If not local, take it to another shop.






Reply With Quote