Any NA K20 or B18C Hondas want a fun run?

[40th GT]

Why would you say that?

B18A

The B18A is not considered part of the modern B-series family. This engine shares many characteristics with the B20A/B21 See Honda B20A engine.

* Non-VTEC
* Found in:
o 1986-1989 Accord Aerodeck LXR-S/LX-S (Japan)
o 1986-1989 Accord EXL-S/EX-S (Japan)
o 1986-1989 Vigor MXL-S (Japan)
+ Displacement: 1,834 cc (111.9 cu in)
+ Compression: 9.4:1
+ Bore: 81 mm (3.2 in)
+ Stroke: 89 mm (3.5 in)
+ Dual Keihin Carbs
+ Power: 100 hp (75 kW) @ 6100 rpm & 128 lb·ft (174 N·m) @ 4700 rpm
+ Transmission: A2N5, E2N5

[edit] B18A1

* NON -VTEC
* Found in:
o 1990-1993 Acura Integra usdm "RS/LS/GS" (DA9, DB1)
+ Displacement: 1,834 cc (111.9 cu in)
+ Compression: 9.2:1
+ Bore: 81 mm (3.2 in)
+ Stroke: 89 mm (3.5 in)
+ Rod Length: 137.01 mm (5.394")
+ Rod/Stroke Ratio: 1.54
+ Redline: 6500 rpm
+ Rev Limiter: 7200
+ Programmed fuel injection
+ Power: 90-91 Only: 130 bhp (97 kW) @ 6000 rpm & 121 ft·lbf (164 N·m) @ 5000 rpm
+ Power: 92-93 Only: 140 bhp (100 kW) @ 6300 rpm & 126 ft·lbf (171 N·m) @ 5000 rpm
+ Transmission: 90-91: A1,S1, cable
+ Transmission: 92-93: YS1, cable

[edit] B18B1

* NON-VTEC
* Found in:
o 1994-2001 Acura Integra "RS/LS/GS/SE" (DC4/DB7)
+ Displacement: 1,834 cc (111.9 cu in)
+ Compression: 9.2:1
+ Bore: 81 mm (3.2 in)
+ Stroke: 89 mm (3.5 in)
+ Rod Length: 137.01 mm (5.394")
+ Rod/Stroke Ratio: 1.54
+ Power: 142 hp (106 kW) @ 6300 rpm & 127 ft·lbf (172 N·m) @ 5200 rpm
+ Redline: 7200 rpm
+ Rev Limit: 7200 rpm
+ Transmission: Y80/S80

[edit] B18B4

* NON-VTEC
* Found in:
o 1996-2000 Honda Ballade 180i
+ Displacement: 1,834 cc (111.9 cu in)
+ Compression: 9.2:1
+ Bore: 81 mm (3.2 in)
+ Stroke: 89 mm (3.5 in)
+ Rod Length: 137.01 mm (5.394 in)
+ Rod/Stroke Ratio: 1.54
+ Power: 142 hp
+ Redline: 7200 rpm
# 142 hp (106 kW) @ 7000 rpm & 127 ft·lbf (172 N·m) @ 5200 rpm
+ Transmission: Y80/4254245

Would you say they have any gut? And I did say NA form.