JUST RACE!!!!!!!!!!
Lol I am not free till Sunday.... so it can't happen till then.
K-What?!?!
What was up with that cobra?
Lol Vteckidd should get me... he traps 5mph faster... The hatch on motor really would be a closer race... don't know why he wants to waste time on me... But I'll run for shits and giggles cause I don't give a FUCK, every day of my life... All I do.. All I do......
K-What?!?!
Oh and Nemo, Full weight coupe.
K-What?!?!
Ok let me explain it as simply as possible.
I said you make more power starting at 3000rpms. I said you had a much more powerful powerband. You keep saying that I am somehow stating that you make more power at 3000rpms
you idiot I'm saying starting at 3000 and continuing to redline you make an average of 20-30 more tq than me. I beat you in peak hp but only for about 300rpms
but from 3000-8200 you have more power
of fucking course 3000 -4000 rpms doesn't mean shit in a drag race but I never said it did. I just said that your motor makes more power everywhere over mine
but it's obvious you can't read a dyno or you don't know how to look at area under the curve or what a multiple cells mean.
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Quit bench racing talking about 4mph trap speeds lol. Tom ran 13.3 with 101 trap but I guess I would be faster huh
just line them up
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Lol So you make 120 torque? How the FUCK do I make 20-30 more torque EVERYWHERE if I make 141 and you make 139?
Slowly some factual basis comes out of your argument.... but your ORIGINAL CLAIM was that my "30 ft/lbs of torque gave me an advantage..."
"you idiot I'm saying starting at 3000 and continuing to redline you make an average of 20-30 more tq than me. I beat you in peak hp but only for about 300rpms"
-VtecKidd
AND FOR FUCKS SAKE I CAN READ A FUCKING DYNO GRAPH THAT'S HOW I KNOW I DON'T MAKE 20-30 MORE TORQUE EVERYWHERE! JESUS FUCKING CHRIST KIDD.
You look like the one that cannot read right now.
Last edited by ejohnson88; 10-29-2009 at 12:52 PM.
K-What?!?!
How short is your 4th gear, if your running to 106 in third? And no I am not saying your wrong.
K-What?!?!
And area under the curve? I've taken more calculus classes than you'll ever take lol Don't try to school me on Area under the curve, you probably don't even know how to solve the most basic of integrals and derivatives. And that was Calc 1 for me :P
K-What?!?!
if you are running a basic B16 tranny which ends around 112ish mph at 8000rpm in 4th if you rev it to 9000rpm you should be able to go 125 no? as Far as gear ratios are concerned.
Here is my information... correct me if I am wrong please.
http://hondaswap.com/reference-mater...-vs-mph-28672/
K-What?!?!
again learn how to read a dyno. That statement right there shows you have no idea what you are talking about.Lol So you make 120 torque? How the FUCK do I make 20-30 more torque EVERYWHERE if I make 141 and you make 139?
Do you think I make 139tq from idle to redline?
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
You're the one saying that I make 20-30 EVERYWHERE which would mean that you only make a max of 120 if my max is 140. Lol simple math much? Lol and and where in my statement did I say that I THINK you make 139 torque across the graph? Please show me how you pulled that out of my statements? All of your statements are really starting me make me question what your "Real World Experience" has taught you.
AND AGAIN SHOW ME WHERE I HAVE DISCREDITED MY ABILITY TO READ A DYNO. I HAVE YET TO SEE PROOF. I love how you put words in my mouth and state things I have never stated in order to Discredit me. It really helps your argumentPromise!
Anyways I offered 45-130, take it or leave it. That's the race I will give you if you want to race me... Otherwise it's a no.
K-What?!?!
Jesus it's like arguing with amateurs.
At certain rpms ou make more power than me it tapers off toward the top
do you have any idea what displacement means? So if I said I have an h22 that makes 204 and my car makes 202 it's an even race right? Let me show you how it's NOT
I'll post dynoes when I get home
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
u know it and now show me where i said i am taking out loans? Speakin out of ur ass again?
Mr. IknowItAll, i am truely impressed by your worthless cheap shot comments...no kidding. I'll be at meet tonight, but sadly won't be running anyone...lets set it up next week, day time run. I know u luv creating drama, but try to hold it back this time around.
Desi you won't do shit fix your car an let me know when it's ready not when I think it's ready.
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Nah goat he tried to run last thursday after I said I couldn't make it 4 hours earlier.
I told people I was gping tonight so magically "he's not racing"
alas I won't be out bstone cancelled he's got strep we will reschedule
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Upsidedowndesi took out a loan on his mint fd lol thought he was ballin
run a carfax onhis fd an see if you can figure out why it dissappeared for 5 years
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Just like last time you didn't have time, i don't have time today. I am only gonna be there for 30 mins or less, goin out with friends, but if anything cancels, I'll be there and down to run tonight.
If i show you the title to FD in my hand, (edit) you sign the title of CRX as it sits to me and if don't have the title i sign the title of WRX and give it to you. Time for you to get ur facts rite and tuck ur tail and run.
You seriously are a stalker aren't you, follow me around here, facebook, other forums, to clubs, and now running carfax's on my cars....wow. (BTW how did u get my vin?)
I will go ahead and post the dyno graphs so we don't have to wait. I went ahead and did a rough overlay since I don't have the dyno software to overlay the two graphs... but you can just take a loot at the originals and the overlays. The Over lay has my Power in Green and Torque in Orange. Vteckidds Torque and Power are both in Black. The ONLY Time that I have more power THROUGH OUT ENTIRE RPM BAND is is a small gap between 4600 and 5000 and about 5100 to 6100, with a peak gap of about 20hp at about 5500-5600ish. Now torque which you have been claiming I make 20-30 more torque through out the ENTIRE POWER BAND
"you have a 30 ft/lb TQ advantage over me too (2.0 vs 1.8 and yes i have overlayed our dyno graphs)."
"As far as the TQ increase, again, stop looking at PEAK numbers, you have roughly a 30ft/lb advantage over me under the curve starting from 3000rpms. sometimes its less, sometimes its more. Thats what having a 2.0l does"
"I said STARTING AT 3000 meaning from the jump you make more power throughout the ENTIRE POWER BAND."
"you idiot I'm saying starting at 3000 and continuing to redline you make an average of 20-30 more tq than me. I beat you in peak hp but only for about 300rpms"
"but from 3000-8200 you have more power"
Alright lets look at those Torque Curves:
We make the SAME TORQUE FROM 3000 to 4500ISH I take the lead in torque from 4500 to 6200ish where I make 20ish more torque from 5400 to 5800... a whole 400 RPM Whoop Dee Doo... Then from 6200 on... well would you look at that we make just about the SAME TORQUE All the way to Redline!! and You Rev 900 RPM higher than me.
"Pretty much what i accomplished was now i can safely rev to 9500 with the PRO valvetrain."
That 20 trq Difference in the mid 5k's still doesn't really give me an advantage over you like you say it does because if you are Revving to 9500 like you say you do, then You're Power band that is used during RACING is never going to go near that... You're gear ratios are too close for you to shift at 9500 and drop to 5500.... Hell I shift at 8600 and I don't even go below 6k.
Now who knows how to read a Dyno graph? Good Fucking Lord.
K-What?!?!
Hey Evan what gear were those done in?
I'm not going to debate any further cause it turns into 20 pages of bullshit. See you Sunday
Meet at bp
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Oh and theoretically since your 4th gear tops out at 112ish mph revving to 9500 should net you around a top speed of 133 mph. Unless you have some set of unknown gear ratios.
So like I said 45-130 is the race I will give you.
K-What?!?!
i like how you make assumptions on my setup when you have zero knowledge. I know EVERYTHING about your car, you dont know anything about mine. YOu have no idea what FD i have, what gearset im running etc.
As i have stated 1000000 times before, my car STOPS at 115mph. I WILL NOT RACE YOU TO 130mph and thats retarded considering we BOTH trap under 110 in the quarter.
So either you run 40-120 (we will both lift before 120 but we can say 120 if that makes you feel better)
or 20-110
45-130 is retarded and is NOT going to happen, i dont have the chassis even close to setup to run those kind of speeds, especially with the diff i have
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
LOL, more downplaying and made up "facts" from Vteckidd!
2006 Corvette Z06
2" Stainless Works LT Headers
Random Technologies 3" X-pipe, with high flow polished cats
Callaway "Honker" cold air intake
Ported throttle body and intake
Custom dyno tune by MTI Racing Atlanta
496rwhp/478tq
Exactly Why I Said "UNless You have an unknown set of Gear Ratios." Can't you fucking read?
K-What?!?!
I LOVE how you idiots say i make up shit but
1) My timeslips are all over the internet
2) My setup, engine, parts list is ALL OVER the internet
3) Ive race plenty of people to know how fast my fucking car is
4) ive run at tracks where other IA people VIDEOTAPED me and saw how fast my car is
5) I have video tape of my car running through the gears and me shifting
WHAT THE FUCK ELSE DO YOU WANT? Downplaying? Evan is skewing the information to make his point, hes missing one key component but im not going to tell him what it is, ill wait till after we race.
Its really simple. If anyone is downplaying its him, not me. He said he ran 13.5 with a passenger in the car? so one tenth off my BEST time and he weighs 400-500lbs more with a passenger AND mishifted ? And im the one sandbagging, right.Originally Posted by Evan
Whats even funnier is how i make up facts, and im a ricer, but you are ALL OVER Btstone nuts and he can quote numbers straight out of his ass with no facts and its "why should he have any proof"
I have fucking proof an you still dont believe me lol
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
I can do 40-120.
K-What?!?!
Lol How is that downplaying I ran what I ran. I was saying that if I could do that, when you get your 60' down and find a set of slicks that works for you you'll definitely be in the 12's.
K-What?!?!
you talk mighty tough on the internet, we will see how it is in person. Pretty high and mighty for someone that wouldnt even take a phone call from me.
No more rhetoric, stay on topic. Answer the last part of post
So either you run 40-120 (we will both lift before 120 but we can say 120 if that makes you feel better)
or 20-110
45-130 is retarded and is NOT going to happen, i dont have the chassis even close to setup to run those kind of speeds, especially with the diff i have
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
You just cried about how this guy is making all this torque "under the curve" than you are, throughout his entire RPM band. Then he posted a dyno that showed you guys pretty much have the same power bands, minus some weird area where yours dips at almost the exact same time his spikes.
You're a fucking cry baby, and I have seen you get owned by your false claims in EVERY SINGLE CALLOUT THREAD you are a part of.
I don't even need to insult you, everyone gets to see this stupidity unfold from you publicly, without my help lol
2006 Corvette Z06
2" Stainless Works LT Headers
Random Technologies 3" X-pipe, with high flow polished cats
Callaway "Honker" cold air intake
Ported throttle body and intake
Custom dyno tune by MTI Racing Atlanta
496rwhp/478tq