Who's car is down right now? (fast guys only )

[Annihilation]

My car is down for Dig runs....I need to find someone to change out my clutch for cheap...damn part # pulls up as a corvette clutch and cost $400 for a stocker....so i'm like fuck...and ppl wanna charge me $400 to replace it so its like f*ck F*ck


after a long search i found a good 6 puck sprung setup for $350 , but still installation price is killing my pocket right now, so i must drive a lil slower

I knew the clutch was going out since i bought it but now its almost time, dont wanna get stuck on the side of the road

[B00STedSvT]

^^Yo Oz i'll run u from a dig whenever u get ur clutch replaced and broken in..Jus let me know bro

[LT1UltraZ]

ahha by the sounds of it there are goin to be few 600+ rwhp cars out this spring...should be some good racing, i hope i can keep up with all the big dawgs

[Nyteryder]

ahha by the sounds of it there are goin to be few 600+ rwhp cars out this spring...should be some good racing, i hope i can keep up with all the big dawgs

should be a couple of 800+whp out this spring

[jmmx258]

Dunno about fast.... maybe just a little bit qwik?
My junk's down for a couple more weeks.

More inches
More spray
More safety
Less weight

Should be a hoot when done-

Your car looks like the one in that video where the dude lets his girlfriend wreck it for her school project lol!

[Tank]

should be a couple of 800+whp out this spring

WERD

[drmcivicsi]

should be a couple of 800+whp out this spring

[Incontt]

mine is down..sold my incon kit. I am waiting for Ohio Forced Induction to finish my hot parts kit....Ill do my own cold side. Waiting on Jose @ Forced Inductions to finish my Airwerks s85 turbo. Waiting on Harlan to ship my impedance converter box....wait wait wait. I think Ill be out in April. Gonna put the roll bar in...looking at 3900 raceweight Adding hp...adding weight.....deleting cash.

[St0lenR]

Only 450whp+ here... But my 1300lb chasis makes up for that

[LT1UltraZ]

should be a couple of 800+whp out this spring

who would that be?

[slowhawk01]

mine is down..sold my incon kit. I am waiting for Ohio Forced Induction to finish my hot parts kit....Ill do my own cold side. Waiting on Jose @ Forced Inductions to finish my Airwerks s85 turbo. Waiting on Harlan to ship my impedance converter box....wait wait wait. I think Ill be out in April. Gonna put the roll bar in...looking at 3900 raceweight Adding hp...adding weight.....deleting cash.

Yeah but you forgot to add in the mid 9's

[slowhawk01]

who would that be?

Every FAST import on here yet they only run 11's at the track

[slowhawk01]

Only 450whp+ here... But my 1300lb chasis makes up for that

If it will hook that will be the

[Nyteryder]

who would that be?

[Nyteryder]

Every FAST import on here yet they only run 11's at the track

This is a new year. THere might be a few that suprise you this year

[LT1UltraZ]

cant wait to see all these 800+whp cars

[Incontt]

i plan to be 800+ flywheel in 30deg air

[Nyteryder]

cant wait to see all these 800+whp cars

Me too

[Tracy]

My car is not down

[lightspeed]

Every FAST import on here yet they only run 11's at the track

LOL, thats so ironic. Didnt you have the "900+" whp firebird that ran 12's or something?

Me too

J, thats totally ludicrous. 800 whp from an import street car? No way...I dont believe it. Its just not possible

[Nyteryder]

LOL, thats so ironic. Didnt you have the "900+" whp firebird that ran 12's or something?

J, thats totally ludicrous. 800 whp from an import street car? No way...I dont believe it. Its just not possible

Its just not possible, and some are suppose to be on a stock bottom. Now you know thats some horse shit.

[Incontt]

i think his ran 12s with no turbo


Hey Tracy!!! I am glad your car is still doing well for ya.

Marcin, what you doing now? I never installed the 75# injectors I got from ya...sold em and got 96#....that oughta hold me at ls1 fuel pressure

[LT1UltraZ]

i think his ran 12s with no turbo


Hey Tracy!!! I am glad your car is still doing well for ya.

Marcin, what you doing now? I never installed the 75# injectors I got from ya...sold em and got 96#....that oughta hold me at ls1 fuel pressure

aww you know....just dumping more money into it ( new heads ). yeah 96# should hold you over. (thats what i have) When is your car going to be back on the road? All i know is i better be at the GAFBA this year..i have plenty of time to get it done

[Incontt]

I think April...depends on how long i have to wait for stuff. Once I start getting some parts, I can start knocking things off the list

[Tank]

Its just not possible, and some are suppose to be on a stock bottom. Now you know thats some horse shit.

[crafty]

Well i just can't wait til everyones shit is back together... I'm really starting to have withdraws from racing.. So now I just take the bike up 575 and I'm good for about a week... LOL

[Sayajin]

Well Im not quite running with the big dogs yet, however since some of the mid guys posted, and I am as fast as them I will mention myself as well.

I am also currently down for a few months. However I will be back out strong as hell once I get my baby back up and running.


-Sayajin

[b0ki]

LOL, thats so ironic. Didnt you have the "900+" whp firebird that ran 12's or something?

J, thats totally ludicrous. 800 whp from an import street car? No way...I dont believe it. Its just not possible

Not a import ... u must have a V8 for that at least a LS1 to make that kinda power

[Curmudgeon]

Your car looks like the one in that video where the dude lets his girlfriend wreck it for her school project lol!

The car you speak of is a Vette.
Nobody drives my junk-

[Curmudgeon]

ahha by the sounds of it there are goin to be few 600+ rwhp cars out this spring...

Looking for something north of 800 rwhp on the hose we'll see

Btw.... from what I've seen/heard.... you're not having any problems keeping up with the big dogs.

Should be a BUNCH of qwik cars this spring. Gonna be more than a few folks caught by surprise and left confused-

[LT1UltraZ]

Not a import ... u must have a V8 for that at least a LS1 to make that kinda power

show me an import that can make 800rwhp on pump gas

But ya i know how u feel boris, since i got a LT1 i am only putin down mid 500s maybe one day ill swap it for a LSx

[lightspeed]

show me an import that can make 800rwhp on pump gas

what does that matter? pump gas is for pussies

Anyway, I know at least one import here making 700+ on pump (no meth.)
With meth, I know a couple in the 800 whp area
I guess meth is cheating, too

[2.3 Evo 8]

Cmon man "The Evil" has been coming for a year now...Where is the evil does anyone know where the evil is....anyone..looking for the evil.. j/k of course

Umm, I've only owned the car a year.

Its coming baby, its coming. :idb:

Southeast muscle car track day owned me.

Should be ready soon and yes Crafty that track day sounds like a good idea with none of the internet bullshit involved. Maybe grab a beer or two.

[Vteckidd]

weve made 7xx on pump gas.

im shooting for 650-700whp

[Tank]

weve made 7xx on pump gas.

im shooting for 650-700whp

[Vteckidd]

my turbo isnt big enough to make 800 and honestly, in a S13, i dont want that much power. not unless i seam weld it.

if i make 550-600 on pump, ill prob leave it there an get used to the car before i try to rape it.

im interested to see how my 280 460 lift cams will idle

[WINDSOR]

my turbo isnt big enough to make 800 and honestly, in a S13, i dont want that much power. not unless i seam weld it.

if i make 550-600 on pump, ill prob leave it there an get used to the car before i try to rape it.

im interested to see how my 280 460 lift cams will idle

you will never have it running

[Curmudgeon]

im interested to see how my 280 460 lift cams will idle

In a small displacement motor..... like a pissed off hooker....

[Vteckidd]

on crowers website it says

IDLE: NONE

[Vteckidd]

you will never have it running

on the contrary my mustang friend