LOOK MO

[CHADbee]

ALL SKEET SKEET SKEETLINE...

http://www.treadstoneperformance.com...1&phot_key=544

[Krazykouki]

that would never flow as good as a direct bolt on for his car. May cost a little more to get a direct bolt on but it would be worth it.

[TIGERJC]

that would never flow as good as a direct bolt on for his car. May cost a little more to get a direct bolt on but it would be worth it.

I dont see the problem with it, yes it won't flow nearly as well as some other intercooler but I bet it is better than some no name ebay ic

[Krazykouki]

I dont see the problem with it, yes it won't flow nearly as well as some other intercooler but I bet it is better than some no name ebay ic

It is the same exact thing. Moron. Where the fuck do you think they get the cores from? Who do you think people on ebay who sell them on ebay get their cores from? They sure as hell dont make them in house.

I'm not saying they are bad. I'm just stating that its nothing but a universal intercooler.

[TIGERJC]

It is the same exact thing. Moron. Where the fuck do you think they get the cores from? Who do you think people on ebay who sell them on ebay get their cores from? They sure as hell dont make them in house.

I'm not saying they are bad. I'm just stating that its nothing but a universal intercooler.

who cares anyway, its a $200 ic what do you expect. Yea call me a moron

*thinks to a certain time*
Tiger - MO I think you broke your clutch
Fake Mexican - NO, MO BROKE HIS slave cylinder or his shift fork.
Tiger - Man I have fucked up two clutches in the past, and that seems like a broke clutch problem.
Fake MEXICAN - I know what I am talking about, b/c I have worked on skylines more than anybody in ga (or something like that) SO that means I know everything about anything

Mo several montha later - I broke the stock clutch

[Alan®]

If I remember right Mo told me he was looking for a huge amount of horsepower and it says only 666hp efficient which is quite a few ponies short of what he was looking to run

[TIGERJC]

If I remember right Mo told me he was looking for a huge amount of horsepower and it says only 666hp efficient which is quite a few ponies short of what he was looking to run

Mo said a while back he was going to pick up a ebay ic and this may be why chad suggested this one

[Ericp]

who cares anyway, its a $200 ic what do you expect. Yea call me a moron

*thinks to a certain time*
Tiger - MO I think you broke your clutch
Fake Mexican - NO, MO BROKE HIS slave cylinder or his shift fork.
Tiger - Man I have fucked up two clutches in the past, and that seems like a broke clutch problem.
Fake MEXICAN - I know what I am talking about, b/c I have worked on skylines more than anybody in ga (or something like that) SO that means I know everything about anything

Mo several montha later - I broke the stock clutch

[Krazykouki]

who cares anyway, its a $200 ic what do you expect. Yea call me a moron

*thinks to a certain time*
Tiger - MO I think you broke your clutch
Fake Mexican - NO, MO BROKE HIS slave cylinder or his shift fork.
Tiger - Man I have fucked up two clutches in the past, and that seems like a broke clutch problem.
Fake MEXICAN - I know what I am talking about, b/c I have worked on skylines more than anybody in ga (or something like that) SO that means I know everything about anything

Mo several montha later - I broke the stock clutch

You know Tiger. I understand why sooo many people want to kick your ass. You just dont know when to shut the fuck up. You do not always have to win every arguement and you look more like a moron trying to. You twist my words all you want but you are nothing but a self centered little prick you simple little bitch. Your a fine one to be talking by calling me a "Fake Mexican" when you are the one that says you hate Black people and you wish you where white. Look in the mirror you twat, I know I am White and I jokingly talking about Mexican shit.

-Chris

[Alan®]

either way i wouldnt buy an ebay intercooler if i were building a car over 400whp and mo will be running MUCH MUCH more thatn 400whp so if Titan made an intercooler i would buy one of those

[TIGERJC]

I am starting a Mexican vaction package

The package will include the following:

1 bottle water
1 lunchable
A mexican guide
1 plane ticket to mexico

You will get to experience the mexican way. Your guide Hector will lead you 20 miles from the U.S. BORDER. Once there you are on your on and must find your way to american soil. You will be tested through out your journey back to america, like hiding from border patrol and mother nature.

-This vaction will stay with you for a long time
-Also this experience can help you to better understand mexicans
-And lastly this will give you a lot cred with illegal mexicans (This is perfect for you chris)

Price: 8 easy payments $99.99

Comiong soon: How to Cut grass like a Mexican

[EmminoDaGreat]

who cares anyway, its a $200 ic what do you expect. Yea call me a moron

*thinks to a certain time*
Tiger - MO I think you broke your clutch
Fake Mexican - NO, MO BROKE HIS slave cylinder or his shift fork.
Tiger - Man I have fucked up two clutches in the past, and that seems like a broke clutch problem.
Fake MEXICAN - I know what I am talking about, b/c I have worked on skylines more than anybody in ga (or something like that) SO that means I know everything about anything
Mo several montha later - I broke the stock clutch

LOLOLOLOLOLOLOLOLOL god your getting +1

[Krazykouki]

I am starting a Mexican vaction package

The package will include the following:

1 bottle water
1 lunchable
A mexican guide
1 plane ticket to mexico

You will get to experience the mexican way. Your guide Hector will lead you 20 miles from the U.S. BORDER. Once there you are on your on and must find your way to american soil. You will be tested through out your journey back to america, like hiding from border patrol and mother nature.

-This vaction will stay with you for a long time
-Also this experience can help you to better understand mexicans
-And lastly this will give you a lot cred with illegal mexicans (This is perfect for you chris)

Price: 8 easy payments $99.99

Comiong soon: How to Cut grass like a Mexican

WTF are you talking about?

[TIGERJC]

WTF are you talking about?

this will complete your mexican transformation

[Alan®]

I am starting a Mexican vaction package

The package will include the following:

1 bottle water
1 lunchable
A mexican guide
1 plane ticket to mexico

You will get to experience the mexican way. Your guide Hector will lead you 20 miles from the U.S. BORDER. Once there you are on your on and must find your way to american soil. You will be tested through out your journey back to america, like hiding from border patrol and mother nature.

-This vaction will stay with you for a long time
-Also this experience can help you to better understand mexicans
-And lastly this will give you a lot cred with illegal mexicans (This is perfect for you chris)

Price: 8 easy payments $99.99

Comiong soon: How to Cut grass like a Mexican

[Krazykouki]

this will complete your mexican transformation

Wow Tiger..If the only thing you can make fun of is things of racial discretion than you my friend really are simple and at a sub standard of intellect. Let me sum that up for you. You are an idiot, you talk all this shit and you can't even put spark plugs in you're own car.

[TIGERJC]

Wow Tiger..If the only thing you can make fun of is things of racial discretion than you my friend are really are simple and at a sub standard of intellect. Let me sum that up for you. You are an idiot, you talk all this shit and you can't even put spark plugs in you're own car.

yea I am, but I am bitch when it comes to installing things. I don't won't to fuck anything up dealing with the motor since its so fucking hard to pull that motor. I have changed my plugs since then like a big boy

[TIGERJC]

racial shit is funny to me and to most ppl I know.

[Krazykouki]

yea I do, but I am bitch when it comes to installing things. I don't won't to fuck anything up dealing with the motor since its so fucking hard to pull that motor. I have changed my plugs since then twice like a big boy

The simple fact of this matter is you came in here saying that the one Chad posted was not like those off of ebay. Well, the fact of the matter is that the ones he posted are no different.

racial shit is funny to me and to most ppl I know.

Well then you don't know me that well now do you. You call me a "fake Mexican" and to me thats hipocritical because you always talk about how "you wish you where white." I have never said anything along the lines of being "Mexican" or wanting to be "Mexican" but I did say that my family comes from Spanish orgin and when you poke fun at that with me, I take offense it because you play too god damn much and 99.9% of the time you play around at the wrong time. I have warned you, just as others have, telling you that you need to learn to shut your mouth, I guess you will never learn until you fuck up and say something to the wrong person. I'm not threatening you in anyway but I am telling you that you have 1 less person in your corner that has your back.

-Chris

[TIGERJC]

The simple fact of this matter is you came in here saying that the one Chad posted was not like those off of ebay. Well, the fact of the matter is that the ones he posted are no different.]

I wouldn't said anything negative to you if u didn't call me a moron. Shit everybody is a moron to you if they don't agree with you. All you had to do was just respectively disagree with me

Well then you don't know me that well now do you. You call me a "fake Mexican" and to me thats hipocritical because you always talk about how "you wish you where white." I have never said anything along the lines of being "Mexican" or wanting to be "Mexican" but I did say that my family comes from Spanish orgin and when you poke fun at that with me, I take offense it because you play too god damn much and 99.9% of the time you play around at the wrong time. I have warned you, just as others have, telling you that you need to learn to shut your mouth, I guess you will never learn until you fuck up and say something to the wrong person.

That person won't be you, so its ok

*Sarcasm* I want to be white *Sarcasm off* I only say that when ppl call me white boy which I just laugh at.

[R.Kelly]

im staying up out dis thread, shit bout to go downs

[Krazykouki]

I wouldn't said anything negative to you if u didn't call me a moron. Shit everybody is a moron to you if they don't agree with you. All you had to do was just respectively disagree with me


That person won't be you, so its ok

*Sarcasm* I want to be white *Sarcasm off* I only say that when ppl call me white boy which I just laugh at.

Thats just it. I don't respect you at all because you are a fucking MORON!

I am quite sure that a lot of people agree with me because you talk to much shit.

[TIGERJC]

Thats just it. I don't respect you at all because you are a fucking MORON!

I am quite sure that a lot of people agree with me because you talk to much shit.

Ok so don't cry like a bitch when I comeback at you and make jokes when u call me a moron

[Krazykouki]

Ok so don't cry like a bitch when I comeback at you and make jokes when u call me a moron

Dude...get a fucking clue and SHUT THE FUCK UP.

[TIGERJC]

Dude...get a fucking clue and SHUT THE FUCK UP.

I am in PMS and this is the PMS section. Non PMS members are not allowed to tell anyone not to post in the PMS section

[Krazykouki]

I am in PMS and this is the PMS section. Non PMS members are not allowed to tell anyone not to post in the PMS section

Cry me a river bitch boy. I dont give 2 shits about you and your cry baby ways and I highly doubt anyone else cares either. Don't get mad Tiger, its not my fault you piss everyone off.

[TIGERJC]

Currently Active Users Viewing This Thread: 5 (3 members and 2 guests)
TIGERJC, UPMotorsport, blacktc
did you two enjoy the lil show???

[Verik]

Psh, all mo needs is that HKS fmic that is like 6 inches thick. That will satisfy just about any goal he could ever think of :P

[CHADbee]

Who do you think people on ebay who sell them on ebay get their cores from? They sure as hell dont make them in house.

from trewadstone wesite....

Treadstone Intercooler features superb quality highly efficient bar and plate construction. Our quality cast end tanks ensure evenly distributed airflow and low-pressure drop. Our intercoolers are pressure checked to 150psi and come with a 1-year warranty against manufacture defect. Bar & Plate Intercoolers are proven to be the most efficient air to air intercoolers on the market. Older styles of tube and fin intercoolers just don�t stack up. If your ultimate goal is to cool the Air to the maximum you have to go Bar & Plate.
We manufacture our bar and plate cores with strict guidelines, and are specifically designed to maximize cooling using the most surface area possible in any given space. Our cores give the perfect balance between heat exchanging efficiency and flow. Our internal fin structure design is top notch, and is where the most important changes can be made to enhance the cooling rate. Treadstone intercooler cores feature a high heat-dissipating "Inner fin" design. This is ideal for medium to high boost levels on higher horsepower or upgraded turbo engines. The larger internal surface area provides superior cooling efficiency for radiating excessive heat and minimizing heat soak. We manufacture the internal fins thickness gauge smaller to dissipate more heat. We use a staggering of the internal fin to provide more surface area and dissipate more heat, this staggering of the fins causes turbulence in the air passing through the intercooler, which slows it down to be dissipated to the ambient air side of the intercooler (the atmospheric air). The external fins are also manufactured with smaller gauge to dissipate heat to the atmosphere more efficiently. They are also louvered to slow down the ambient air causing turbulence enhancing the cooling rate even more. In general, these design characteristics is what gives Treadstone Intercoolers the leading edge in intercooler technology.

no cheap china made cores here, all american made, good quality shit. this is not an ebay core!!!!

and i wasnt showing this to Mo to buy the FMIC, its a midnight purple R33 GTR

and i thought it was pretty cool that it was the same car he has in the same rare color

[TIGERJC]

from trewadstone wesite....

Treadstone Intercooler features superb quality highly efficient bar and plate construction. Our quality cast end tanks ensure evenly distributed airflow and low-pressure drop. Our intercoolers are pressure checked to 150psi and come with a 1-year warranty against manufacture defect. Bar & Plate Intercoolers are proven to be the most efficient air to air intercoolers on the market. Older styles of tube and fin intercoolers just don�t stack up. If your ultimate goal is to cool the Air to the maximum you have to go Bar & Plate.
We manufacture our bar and plate cores with strict guidelines, and are specifically designed to maximize cooling using the most surface area possible in any given space. Our cores give the perfect balance between heat exchanging efficiency and flow. Our internal fin structure design is top notch, and is where the most important changes can be made to enhance the cooling rate. Treadstone intercooler cores feature a high heat-dissipating "Inner fin" design. This is ideal for medium to high boost levels on higher horsepower or upgraded turbo engines. The larger internal surface area provides superior cooling efficiency for radiating excessive heat and minimizing heat soak. We manufacture the internal fins thickness gauge smaller to dissipate more heat. We use a staggering of the internal fin to provide more surface area and dissipate more heat, this staggering of the fins causes turbulence in the air passing through the intercooler, which slows it down to be dissipated to the ambient air side of the intercooler (the atmospheric air). The external fins are also manufactured with smaller gauge to dissipate heat to the atmosphere more efficiently. They are also louvered to slow down the ambient air causing turbulence enhancing the cooling rate even more. In general, these design characteristics is what gives Treadstone Intercoolers the leading edge in intercooler technology.

no cheap china made cores here, all american made, good quality shit. this is not an ebay core!!!!

and i wasnt showing this to Mo to buy the FMIC, its a midnight purple R33 GTR

and i thought it was pretty cool that it was the same car he has in the same rare color

So are you telling me this is not the same ic thats found everywhere on ebay?

[Krazykouki]

Ok...then why did you say differently? You said that they buy cores and put end tanks on them. You then said yourself that they are the same as Ebay intercoolers.

That color is not rare. There is another R33 in Conyers that is the same exact color. There are MANY that are the same exact color.

[Krazykouki]

Hmm.....makes you wonder doesnt it.

Overall these 2 intercoolers I have posted are the same exact size.

[CHADbee]

So are you telling me this is not the same ic thats found everywhere on ebay?

no it is not

Ok...then why did you say differently? You said that they buy cores and put end tanks on them. You then said yourself that they are the same as Ebay intercoolers.

That color is not rare. There is another R33 in Conyers that is the same exact color. There are MANY that are the same exact color.

no i said that kalebs old FMIC was the same core as whats sold on ebay, i never said anything about treadstones cores being the same, and i put my life on that.

i didnt know that about the color, i thought that was a rare color, oh wells.

[CHADbee]

Hmm.....makes you wonder doesnt it.

different core sizes.

treadstones are 22 wide and that one is 26.5 yet that flow the same but treadstones is 4.4 inchs shorter.

i will say this once and once only. theese are not powerXS or XSpower or whatever cores, theese cores are not made in china they are made in mami FL

[Krazykouki]

different core sizes.

treadstones are 22 wide and that one is 26.5 yet that flow the same but treadstones is 4.4 inchs shorter.

i will say this once and once only. theese are not powerXS or XSpower or whatever cores, theese cores are not made in china they are made in mami FL

Length X Width X Hieght

not trying to be an ass, but do the math on it.

200~205 area.

they have the same exact area and Air volume and flow rate are the same. They may not be manufactured the same but they are the same none the less.

[CHADbee]

find theese on ebay...

notice whats stamped on the side of the cores...

[CHADbee]

They may not be manufactured the same but they are the same none the less.

if they are not manufactured the same, then they are the same....

[TIGERJC]

no it is not


no i said that kalebs old FMIC was the same core as whats sold on ebay, i never said anything about treadstones cores being the same, and i put my life on that.

i didnt know that about the color, i thought that was a rare color, oh wells.

I'm shocked, I can't believe chris could be wrong about something

[Krazykouki]

I'm shocked, I can't believe chris could be wrong about something

How am I wrong?

The intercoolers are the same. Look at the damn pix "MORON" that I posted and do the damn math yourself.

They are both appx. 200~205 Cu. In.

[TIGERJC]

How am I wrong?

The intercoolers are the same. Look at the damn pix "MORON" that I posted and do the damn math yourself.

so any ic that has the same dimensions as a name brand one is the same?