b20/vtec questions?? help??

[Grimm Reeper]

ok i have a b20b block and am currently building it, i have a few questions and im sure some of you know what your talking about.

Im putting a gsr head on it that i already have just waiting on the head bolts to come in,

ok so here's the questions,

1. can someone tell me exactly how i adjust the head timing (the cams) to the proper way?
2. do i need to get a gsr water pump or can i use the b20 water pump?
3. is there a certain type of distributor i need?
4. i have the p28 ecu so do i need to get it chipped or is it already vtec ready? and if i do have to get it chipped, is that an easy process?
5. what type of timing belt do i need? b20 or gsr?

i do believe that is all the questions i need answered, any help at all would be greatly appricated.
**im sure these sound like dumb questions, but im just wanting to make sure im doing everything right**
and i have tried looking up the information myself but im not having any luck.

you can either post the answers here or pm them.
and if you really know what your doing (or have done this swap before) and live in columbus then pm so we can meet up to help me, (will pay of course)

thanks.

1. Listen to DaGreat
2. GSR or any other 22T water pump
3. Dizzy depends on your harness
4. You could run off the P28, but it's still running of the SOHC MAP.......
5. GSR Timing Belt

[B20Civic92]

thanks guys, that helped out a lot,
but on my p28 ecu, it was runnin a stock b20, (dohc), so wouldn't that mean that its already ready?