help please

[eg mike]

i checked the check engine light code and i counted 58 1 second flashes with about 5 or 6 seconds between flashes with the ecu that ran my d series. so with that many flashes that far apart. was it telling me it was a code 10? if so thats the IAT sensor. i will check it tomorrow with the p28.

58 1 second flashes


there is a delayed flash and a quick flash..

delayed flash = 10
quick flash = 1

If there is more than 1 code there will be an even bigger delay for the next code. You know your done when you get the same code twice...

[boostedb16]

58 1 second flashes


there is a delayed flash and a quick flash..

delayed flash = 10
quick flash = 1

If there is more than 1 code there will be an even bigger delay for the next code. You know your done when you get the same code twice...

on honda-tech the sticky about checking code's said "one second flash= 10's and half second flash= 1's.