if anyone can provide an exhaustive list of the parts I would need to do this on a 95 civic ex, it would be greatly appreciated
auto to manual conversion
if anyone can provide an exhaustive list of the parts I would need to do this on a 95 civic ex, it would be greatly appreciated
Starter
Flywheel
Clutch kit
Pedals
Vehicle Speed Sensor (if it didn't come with the tranny tranny)
ECU
Clutch master cylinder
Clutch fluid resivoir
Clutch slave cylinder
Clutch fork
Clutch Bolts
Hydro Lines
Shift linkage
Shifter
Shifter bushings
Shift knob
Flywheel bolts
Tranny bolts
Starter bolt (It's longer than the auto starter)
Flywheel cover (inspection plate)
Throttle cable
Center console (If you mind the existing auto one)
cotter pins (to connect pedals to clutch, etc)
Long black tranny bracket
And any other screws and bolts that come off the donor car.
*Either a Auto to Manual tranny mount OR a Manual Chassis bracket
G/L
BlkCD5, I now respect you as a god among men, thank you for this info, very very much. This is exactly what i needed
Originally Posted by jakerd4892
Why?! Its not hard naming everything needed for a Auto-to-Manual swap.
"Damn, Its Tyler"RaceReadyDevelopments
ha, well for me it is, and to get all of it in one place is great, and if anyone wants to help on some installation tips, that would also be great
ive answered this question about 4 times last month a few the month before. search before asking simple questions please.
no mo hondas, honestly, stop getting onto people for doing nothing wrong. I have searched and could not find a proper answer, plus it is sometimes better to get an answer from an actual human than a random source. I could understand if I was asking something that didn't even make sense. It isn't like I have been PM'ing YOU over and over again asking this question, therefore, it did not bother you in the least. Resulting in the fact that you have no need to say what you just said. The only reason I can think of is that you are pissed off at the world. If that is the case, get over it man and chill out. Just relax and let people do what they do. You seem to be knowledgeable around the boards man, props for that. I just wish you wouldn't be all pissy to people trying to get some advice. But I do respect you for the help you have given people, Hell, I've even read some of what you have written and used it. So thanks personally. But asking a question doesn't harm you, so no need to get onto me about it.
^ lmao wtf
Actually I answered this very same question with the proper answer about a month ago if not a month 1/2.
"Damn, Its Tyler"RaceReadyDevelopments
that applies to like 100 ia members
smalls just wasted your time typing all that. for that im sry. you would have your answer with out making another pointless over talked about thread. im not tryin to be a dick but im tired of seeing the same questions week after week.
just a few
General Transmission Swap Questions
Auto to Manual Conversion
Auto to manual conversion
SEARCH BEFORE U ASK
alright man, just wondering, and i'm not asking in an as*hole-ish way at all. Just honest curiosity, have you performed this conversion before? If you have, I was just gonna ask how difficult you thought it was
its not bad the hardest part for me is getting the few bolts under the dash because i have big hands. if u got small hands there shouldnt be a problem with anything.
alright, sounds great, can it be done in a weekend?
^^ yes i did mine in a couple days..
I did the same thing your trying to do about a year ago when i had SOHC!!!
ha, thats what I have now, but I'm waiting until I buy my new motor and doing it all at once. So your conversion went well Black4DrEK?
yea it was good, but i went B series shortly after blowing the Single cam!!!!
ive done them in a day so a weekend shouldnt be a problem.
what parts do you still need for your conversion???
I need all of them, haha
i have
Pedals
Clutch master cylinder
Clutch fluid resivoir
Clutch slave cylinder
Hydro Lines
Throttle cable
cotter pins (to connect pedals to clutch, etc)
Long black tranny bracket
auto-manual tranny mount
all is yours for $350
lemme look into that, but i'm sure i'll be pm'ing you soon, where are you located
henry county, down by summit racing
where did you get all of those parts from?
i converted my del sol from auto to manual.. did have a d15b7, now has a B18b1 LS
car got totalled, now im parting it out. getting pics together to make a part out thread
what about the motor? or did that get totaled also?
no, its fine, i drove it around the neighborhood today, took it up to 60mph and let it run for a few min. its in great shape, its got 136k miles on the swap, 1995 obd1 LS with LS tranny, 1200 for full swap
alright man, lemme look into that
lol @ looking into it
just lmk
Posting Permissions
Reply With Quote
