Newnan meets

**bbuba** · 10-03-2010, 09:44 PM

Originally Posted by h23bb2

its quiet in here today... blaine- you almost done with the clutch??

Nope... Dad wont let me touch anything on the trans ... I have it out of the truck ...
He has been doing research for like 5 days
He finally said that he really doesn't want to rebuild it because he hasn't seen a transmission quite as complex as this... I don't think he has a plan now

**Ricer** · 10-03-2010, 10:51 PM

**FlipA** · 10-03-2010, 11:11 PM

Originally Posted by Ricer

HAHAHAHAHAHAHAHAHAHAHAHAHA!!!!!!

I may be laughing but that may have happened to me earlier if I was naive.

**Schroeder** · 10-04-2010, 01:10 AM

Originally Posted by Ricer

When you outta here?

**bbuba** · 10-04-2010, 07:48 AM

Dam

**h23bb2** · 10-04-2010, 08:50 AM

ive seen that about a year ago. funny ass shit!!!!! lol

**bbuba** · 10-04-2010, 09:19 AM

http://www.4btswaps.com/forum/showth...003-4bt-dakota

http://www.youtube.com/watch?v=e-upI...e_gdata_player

http://www.youtube.com/watch?v=rUUcI...e_gdata_player

**Ricer** · 10-04-2010, 04:36 PM

Originally Posted by Schroeder

When you outta here?

my last day at work is friday.. then i'm rollin out on saturday as early as i can stand it

**Schroeder** · 10-04-2010, 04:43 PM

Originally Posted by Ricer

my last day at work is friday.. then i'm rollin out on saturday as early as i can stand it

Good deal!!! I will try to swing by and see you before you take off outta here.

**05IONREDLINE** · 10-04-2010, 08:30 PM

Got my waiver!!! Go to the hotel wednesday night and then go to MEPS on thursday. I'll find out when I leave for basic while there and where I'll be going.

**Mr Egg Rollllll** · 10-04-2010, 09:23 PM

Originally Posted by tnomud

If you know how to mount tires without fubaring wheels please step forward..........................um....not so fast Bobby

The Rockstar wheels are EXTREMELY hard not to scratch in the first place because they are so convex(There is no flat part of the wheel to break the bottom bead). Against our recommendations, you bought "P metric" tires, which are really flexible, instead of "LT" tires that are made for the Rockstar wheel and your specific truck. By purchasing "P metric" tires, the process of dismounting them becomes impossible without damage to the wheels. I told you that this was a very likely situation as soon as I was aware of the fact that your wheels would be damaged if I attempted to dismount. You asked me to proceed and to be as gentle as possible. I did the best job that I could with multiple associates watching and the wheels were damaged during the process of breaking the bead of the tire from the wheel. There is nothing that I, my associates, or anyone for that matter, could have done to prevent damage to the wheels. That being the case, I still feel bad for it. I wish there was something I could do to fix it, but there's nothing I can do.

**Humphrizzle** · 10-04-2010, 11:05 PM

Originally Posted by bbuba

Nope... Dad wont let me touch anything on the trans ... I have it out of the truck ...
He has been doing research for like 5 days
He finally said that he really doesn't want to rebuild it because he hasn't seen a transmission quite as complex as this... I don't think he has a plan now

I rebuild transmissions for a living... Ill help if you need me

**Tommy_T** · 10-04-2010, 11:18 PM

havnt you only worked there for about 2 weeks now billy?

**Humphrizzle** · 10-04-2010, 11:41 PM

2 months...

**bbuba** · 10-05-2010, 12:02 AM

We have a plan... It's cheaper to replace than rebuild

**FlipA** · 10-05-2010, 12:30 AM

Originally Posted by 05IONREDLINE

Got my waiver!!! Go to the hotel wednesday night and then go to MEPS on thursday. I'll find out when I leave for basic while there and where I'll be going.

You have to take a qualifications test to see if you meet the minimum educational standards right?

**Schroeder** · 10-05-2010, 12:53 AM

Originally Posted by Mr Egg Rollllll

The Rockstar wheels are EXTREMELY hard not to scratch in the first place because they are so convex(There is no flat part of the wheel to break the bottom bead). Against our recommendations, you bought "P metric" tires, which are really flexible, instead of "LT" tires that are made for the Rockstar wheel and your specific truck. By purchasing "P metric" tires, the process of dismounting them becomes impossible without damage to the wheels. I told you that this was a very likely situation as soon as I was aware of the fact that your wheels would be damaged if I attempted to dismount. You asked me to proceed and to be as gentle as possible. I did the best job that I could with multiple associates watching and the wheels were damaged during the process of breaking the bead of the tire from the wheel. There is nothing that I, my associates, or anyone for that matter, could have done to prevent damage to the wheels. That being the case, I still feel bad for it. I wish there was something I could do to fix it, but there's nothing I can do.

Give him a handie

Originally Posted by Humphries

I rebuild transmissions for a living... Ill help if you need me

Know how to rebuild Ford ZF Transmissions?

Originally Posted by FlipA

You have to take a qualifications test to see if you meet the minimum educational standards right?

It's called the ASVAB test. And If he has put in for a waiver then he has already taken it.

**FlipA** · 10-05-2010, 01:43 AM

Originally Posted by Schroeder

It's called the ASVAB test. And If he has put in for a waiver then he has already taken it.

Believe it or not, I'm considering on enlisting. I'm just researching what I need to know prior, and I guess preparing myself physically and mentally.

**Schroeder** · 10-05-2010, 03:21 AM

Originally Posted by FlipA

Believe it or not, I'm considering on enlisting. I'm just researching what I need to know prior, and I guess preparing myself physically and mentally.

I did 4 years in the Air Force. Loved every minute of it. I wish I would have never got out. You'll never have the type of friendships or camaraderie that you will get from your military brothers and sisters anywhere else. Some days were better than others, but you'll never regret doing it if you give it 100%. Alot will depend on what branch you go in, what squadron (or Det, Squad for other branches) and the area you end up getting orders to, but all in all it was a great experience.

I went Air Force cause I knew I didn't like to run every day, i didn't want to live in a tent, and I didn't want to be a ground pounder. I know alot of people who do like to do that type of crap, but that wasn't for me. I stayed in hotels, drove rental cars, and ate good food everywhere i went. I did have to go to the desert for a few months, but we all just made the best of it.

I ended up working on F-15's, got my A&P license, got out and went to work for the airlines. Looking back now I should have picked a different career field, but i would still do it the same even if I had the chance to change it.

Here's one of me way back in the day in Las Vegas at Nellis.

**tnomud** · 10-05-2010, 06:19 AM

Originally Posted by Mr Egg Rollllll

The Rockstar wheels are EXTREMELY hard not to scratch in the first place because they are so convex(There is no flat part of the wheel to break the bottom bead). Against our recommendations, you bought "P metric" tires, which are really flexible, instead of "LT" tires that are made for the Rockstar wheel and your specific truck. By purchasing "P metric" tires, the process of dismounting them becomes impossible without damage to the wheels. I told you that this was a very likely situation as soon as I was aware of the fact that your wheels would be damaged if I attempted to dismount. You asked me to proceed and to be as gentle as possible. I did the best job that I could with multiple associates watching and the wheels were damaged during the process of breaking the bead of the tire from the wheel. There is nothing that I, my associates, or anyone for that matter, could have done to prevent damage to the wheels. That being the case, I still feel bad for it. I wish there was something I could do to fix it, but there's nothing I can do.

I wornte your name on the spokes

**h23bb2** · 10-05-2010, 11:12 AM

those were nice wheels... not trying to stir the pot, just saying.

anyway- i hate school......

**bbuba** · 10-05-2010, 11:33 AM

Originally Posted by h23bb2

those were nice wheels... not trying to stir the pot, just saying.

anyway- i hate school......

Agreed
What are you schooling for?
Any of y'all have plans on going to any benefit car shows or drives?

**h23bb2** · 10-05-2010, 11:42 AM

taking core/required classes for nursing program.
i wanna go to a new/different/decent meet. can't make the V this week...,
wish our meets didn't suck so bad....

**SHHHH** · 10-05-2010, 11:55 AM

They used to be bumping, this time last year we had a full lot. Still a fun crowd, just smaller.

**h23bb2** · 10-05-2010, 01:16 PM

alot smaller.

**bbuba** · 10-05-2010, 01:41 PM

Where you schooling at?

And I just Got an endoscopy.
Feelin loopy lol!

**chriskm** · 10-05-2010, 02:34 PM

Hell yeah! Slit my knee open with a utility knife while working in the garage last night. All the way to the bone, but I didn't feel it.

**Humphrizzle** · 10-05-2010, 04:18 PM

Oh das nasty

**roxie911** · 10-05-2010, 04:19 PM

Originally Posted by h23bb2

alot smaller.

maybe if you'd bring your ass out and stop complaining it would be a little bigger

**bbuba** · 10-05-2010, 05:54 PM

Lol git him roxie

**h23bb2** · 10-05-2010, 07:13 PM

im goind racing :-D lol
idk... depending on how i feel i may come out this week.

**Mr Egg Rollllll** · 10-05-2010, 07:40 PM

I should be out this week...getting the sol registered tomorrow.

**Schroeder** · 10-05-2010, 07:57 PM

Originally Posted by chriskm

Hell yeah! Slit my knee open with a utility knife while working in the garage last night. All the way to the bone, but I didn't feel it.

Looks good! Gonna be sore for awhile though! Shoulda called me up, I still have the stapler from the last time I got stapled back up. Wouldn't have cost you a thing!

**chriskm** · 10-05-2010, 08:09 PM

I'm only... oh, wait, I just have gas money in it.
No out of pocket for stitches, tetanus shot is covered, and the antibiotic I have to take was free from Public.

Plus I have a bunch of gauze and the lidocaine they were supposed to use on me.

**bbuba** · 10-07-2010, 10:45 PM

Yay we are back up and runnin

**firby911** · 10-07-2010, 10:48 PM

This layout sucks so hard.

**bbuba** · 10-07-2010, 11:01 PM

I hate the colors
You go to the vmeet?
And I think we should have a newnan street racer thugs thread on iz

**Schroeder** · 10-07-2010, 11:35 PM

Originally Posted by bbuba

I hate the colors
You go to the vmeet?
And I think we should have a newnan street racer thugs thread on iz

Newnan Ppl dont Skreet Race!

**Bacon** · 10-08-2010, 06:58 AM

New IA colors are horrible.

**roxie911** · 10-08-2010, 07:27 AM

I hate this layout.
I hate IA.

Thread: Newnan meets

Thread Tools

Display

Tags for this Thread

Posting Permissions

About us

Announcement