WTB/WTT SECTION (Columbus area)

Printable View

Show 100 post(s) from this thread on one page

01-16-2010, 05:10 PM
delslo

all gone sorry guys

Quote:

Originally Posted by VTEC~NO

im needin to get rid of my zex kit.. i know someone around here is wantin to go faster.. it is a wet shot.. text me and let me know if you want it or know someone that might want it.. low price and still half a bottle left.. only askin $250.00.. 706-587-5192 do not pm.. i dont get on here much anymore..

now i can beat you
01-19-2010, 05:03 PM
98tegCHICK

Jus tryin this out...I'm not a very good salesperson :cry:

wts/wtt...

My amber corners from my 98 teg

http://i670.photobucket.com/albums/v...6/DSCF2925.jpg

and K&N air filter...they sent me an extra one that's still in the box, hasn't even been opened

http://i670.photobucket.com/albums/v...448EST2009.jpg
01-20-2010, 01:52 PM
LIKEG6

Need a passenger side b series axle!
01-20-2010, 08:26 PM
SAVAGE21PRO

Quote:

Originally Posted by T2KU

Need a passenger side b series axle!

it aint the right side , its the left side like i told you
01-20-2010, 09:29 PM
LIKEG6

Left side should be right. DA halfshaft and DA axle. Left side is vibrating. You'll have to drive it tomorrow morning.
01-31-2010, 04:10 PM
slimjim

need a b series hydro tranny a f in good one 423-883-0756
02-04-2010, 10:43 PM
Miotu

lookin for wheels for my coupe pref saws or ls meshies with or w/out tires dosn't matter
02-05-2010, 10:36 AM
VIIIrs

i've got 2 12" kicker cvr's i'm trying to sell in a pro box if anyone is interested PM me....i'm asking for 325 let me know
02-11-2010, 07:58 PM
ash7

Item #1- an integra hood.

If it's chipped, dented, or paint is completely missing in some spots, that is just fine with me. In fact, the worse it looks, the better.

Item #2 - a set of 4x114.3 hubs for my integra, i'll make this short, sweet, and easy to understand:

- Option 1) You have the conversion i need - and i buy them from you.
- Option 2) We trade wheels and hubs straight up. (if your wheels are worth more; i'll pay the difference - if mine are worth more; you pay.)
- Option 3) I trade you my wheels for your conversion.

Below are a couple quick pictures of the Sportmax 002 +38s currently installed. Tires are Falken RT-615 Azenies. Two are toast, the other two will need replacing in a few months.

http://i2.photobucket.com/albums/y44...IMG_0044-1.jpg
--
http://i2.photobucket.com/albums/y44...G_0045-3-1.jpg

Best method of contact is via PM on here.

Thanks
-jonathan
02-11-2010, 10:13 PM
JDMTEG1990

WTT: my super fins for something else.. just time for a new look.. 195/45/15 no curbage. and fronts have camber wear.. something about the same size and same condition.. pic is in the sig..
02-12-2010, 08:02 AM
kr3w108

Just sell me the car. ;)

Quote:

Originally Posted by ash7

Item #1- an integra hood.

If it's chipped, dented, or paint is completely missing in some spots, that is just fine with me. In fact, the worse it looks, the better.

Item #2 - a set of 4x114.3 hubs for my integra, i'll make this short, sweet, and easy to understand:

- Option 1) You have the conversion i need - and i buy them from you.
- Option 2) We trade wheels and hubs straight up. (if your wheels are worth more; i'll pay the difference - if mine are worth more; you pay.)
- Option 3) I trade you my wheels for your conversion.

Below are a couple quick pictures of the Sportmax 002 +38s currently installed. Tires are Falken RT-615 Azenies. Two are toast, the other two will need replacing in a few months.

http://i2.photobucket.com/albums/y44...IMG_0044-1.jpg
--
http://i2.photobucket.com/albums/y44...G_0045-3-1.jpg

Best method of contact is via PM on here.

Thanks
-jonathan
02-16-2010, 03:50 PM
just a honda

lookin for ls vtec parts .. let me know what u got .. i need everything to do the oil lines and a vc and some cams.......
02-17-2010, 08:36 PM
-S Double C-

looking for a intercooler before i buy a new one friday. I hit a huge brick in the road and mine is toast...lmk if anyone has one i need it right away
02-18-2010, 10:30 AM
99jdmLs

pm paul sean, aka 1d1ot
02-18-2010, 09:09 PM
ash7

I'm needing a turbo oil drain flange gasket.

Anyone have a spare that i could buy?
-jonathan
02-18-2010, 09:15 PM
mr.koupe

2.25 front 2.0 in drop rear, springs with perfectly good stock struts. came off of my ej8. first $75.00 bux takes em.
02-18-2010, 11:49 PM
ash7

Sparco Type 338 steering wheel.

Hub is not included, it is a six bolt design. (obviously, from the pictures) Wheel is in terrific shape, and has zero blemishes.

http://i2.photobucket.com/albums/y44...7/48dd3f3f.jpg

http://i2.photobucket.com/albums/y44...7/ae89a874.jpg

180firm

i can be reached via pm on here

-jonathan
02-19-2010, 02:50 PM
snowflake09

Hid bulbs anyone? I need one asap!
02-19-2010, 03:58 PM
mr.koupe

what kelvin are they ?
02-19-2010, 05:46 PM
snowflake09

Quote:

Originally Posted by mr.koupe

what kelvin are they ?

10k

ill take anything right about now though. lol
02-21-2010, 09:43 PM
just a honda

need vtech vc, gsr or itr or ctr cams or aftermarket. would like to get local in town not realy down to ride to altanta. so hit me up with what u got.
02-23-2010, 02:00 PM
just a honda

also need gsr a iac valve,and fuel rail for a b17 gsr not sure if the 1.8 gsr will work had a ls it didnt ....
02-23-2010, 02:32 PM
-S Double C-

all b series and d series iacv's are the same and you shold be able to use any b series fuel rail ls/gsr/b16/b20 etc
02-23-2010, 03:34 PM
ash7

Quote:

Originally Posted by -S Double C-

all b series and d series iacv's are the same

incorrect, obd2 IACVs are different than obd1 and obd0 types as they have a third wire (orange) which provides a ground for the servo to use as a reference ground during operation.

bolt holes also vary in placement.

edit* kinda figured you'd have some type of "knee jerk" reaction to this and challenge me to a race, or explain how unnecessary my car is... and so to somewhat curb that, i jumped on ek9.org real quick and got this picture:

http://i648.photobucket.com/albums/u...c6000/iacv.jpg

never properly thanked you for caring enough to go find the video of my car on the dyno though, so, thanks. :goodjob:
-jonathan
02-23-2010, 04:50 PM
hondalover00

lol
02-23-2010, 06:04 PM
LIKEG6

Delafave is dead on the money.
02-23-2010, 06:50 PM
-S Double C-

Quote:

Originally Posted by ash7

incorrect, obd2 IACVs are different than obd1 and obd0 types as they have a third wire (orange) which provides a ground for the servo to use as a reference ground during operation.

bolt holes also vary in placement.

edit* kinda figured you'd have some type of "knee jerk" reaction to this and challenge me to a race, or explain how unnecessary my car is... and so to somewhat curb that, i jumped on ek9.org real quick and got this picture:

http://i648.photobucket.com/albums/u...c6000/iacv.jpg

never properly thanked you for caring enough to go find the video of my car on the dyno though, so, thanks. :goodjob:
-jonathan

explain to me how tanger as a "obd2" one on his car then and its obd0 or how i have a obd1 on my obd2 civic or obd2 on my ls vtec out the hatch or obd2 on my obd1 teg. If you wanna get technical they work the same and all fit from what ive seen i just took one off my old d16 manifold a few weeks ago and put in on my victor x manifold. BTW that was a sad dyno pull my girls 5 series would amuse us better on it then that.
02-23-2010, 06:58 PM
just a honda

well i didnt test fit it but the person i am helping put this together said the one off of his ls iac bolts wont line up on the b17 valve cover.. also the bolt hole from the fuel rail will not line up also... soo dont know about the one he needs but i will take the one off my gsr and try it so i will know what sensor and rail is needed ..... but thanks everyone for given info
02-23-2010, 08:23 PM
kr3w108

kpro

I am wanting to buy kpro'd ecu for my ep. I can buy brand new right now but want to see if anyone on here has or knows of anyone wanting to sell their kpro'd ecu. Who is "prather"? is he on IA ? would like to get intouch with him about this. thx...........:goodjob:
02-23-2010, 10:28 PM
snowflake09

Quote:

Originally Posted by kr3w108

I am wanting to buy kpro'd ecu for my ep. I can buy brand new right now but want to see if anyone on here has or knows of anyone wanting to sell their kpro'd ecu. Who is "prather"? is he on IA ? would like to get intouch with him about this. thx...........:goodjob:

PM Brooks (T2KU). He can get up with him. :goodjob:
02-23-2010, 10:40 PM
LIKEG6

You're buddy JDMTEG1990 has my number if he saved it. I have pretty much everyones number that gets on here regularly or know how to get in touch with most people in the Columbus "scene". Just let me know. I'll pm you my number tomorrow dude.
02-23-2010, 11:59 PM
ash7

Quote:

Originally Posted by -S Double C-

If you wanna get technical they work the same

wrong again. If they did, then why would you need to do this:

http://www.ff-squad.com/tech/wiring/...-98_a-plug.jpg

or this:

http://www.ff-squad.com/tech/wiring/...-01_b-plug.jpg

Quote:

Originally Posted by -S Double C-

and all fit from what ive seen

here's the problem ^

edited ash7 fun fact: the three wire types were only equipped on civics equipped with ATs from 96-00.

Quote:

Originally Posted by -S Double C-

BTW that was a sad dyno pull my girls 5 series would amuse us better on it then that.

i sure would hope so. Why don't you share some of your own, very impressive dyno videos with us?
-jonathan
02-24-2010, 08:06 AM
kr3w108

Quote:

Originally Posted by T2KU

You're buddy JDMTEG1990 has my number if he saved it. I have pretty much everyones number that gets on here regularly or know how to get in touch with most people in the Columbus "scene". Just let me know. I'll pm you my number tomorrow dude.

Alright man.
02-24-2010, 10:03 AM
ej1boy95

I am wanting to trade my rims for some different ones. The ones I want to trade are in my sig.
02-24-2010, 12:34 PM
-S Double C-

Quote:

Originally Posted by ash7

wrong again. If they did, then why would you need to do this:

http://www.ff-squad.com/tech/wiring/...-98_a-plug.jpg

or this:

http://www.ff-squad.com/tech/wiring/...-01_b-plug.jpg

here's the problem ^

edited ash7 fun fact: the three wire types were only equipped on civics equipped with ATs from 96-00.

i sure would hope so. Why don't you share some of your own, very impressive dyno videos with us?
-jonathan

tanger has a dyno of my coupe on his old phone. Still need to explain how were using different iacv's with no CEL's and perfectly running
02-24-2010, 12:37 PM
TangDang

i smoke crack outta light bulbs:crazy:
02-24-2010, 04:36 PM
snowflake09

Quote:

Originally Posted by TangDang

i smoke crack outta light bulbs:crazy:

Lol
02-24-2010, 05:08 PM
mr.koupe

Quote:

Originally Posted by TangDang

i smoke crack outta light bulbs:crazy:

doesn't surprise me. :no:
02-24-2010, 08:34 PM
ash7

Quote:

Originally Posted by -S Double C-

Still need to explain how were using different iacv's with no CEL's and perfectly running

you said that all b and d series operate and mount the same as well as all being interchangeable. I have showed you clearly, in more ways than one that is not the case.

No explanation necessary
-jonathan
02-24-2010, 09:01 PM
TangDang

Quote:

Originally Posted by ash7

you said that all b and d series operate and mount the same as well as all being interchangeable. I have showed you clearly, in more ways than one that is not the case.

No explanation necessary
-jonathan

where now you listen her sunny boy de man gave me dat der obd2 off his old y8 swap and it worked out parfect....know whata mean?

Show 100 post(s) from this thread on one page