Quote Originally Posted by Crowml
Depends what line? Diamond Hex series is unbeatable in my book. I used to run a nationally ranked db setup (162 no wall 1 amp 2 subs). So you may take my word as you please. But the imaging in the hex series is a+. Fidelity is long lasting and as mentioned before quality is unbeatable. However, be advised that I don't recommend cranking on this setup. Silk tweets and compound cones don't hold well to humidity and stress. So enjoy it with moderation.
Hope this helps. You're welcome to catch my vehicross at any meet, I'm running hex 6.5 components, coaxs and a pair of Xtant 10"s

Hex componets are also available with aluminum tweets; depending on the install, might be better suited. Depends on the music, location, and personal preferences. Silk typically has a smoother response, a bit more mellow of a sound, and also typically with a bit of natural roll-off in the upper frequencies.

Aluminum typically has a bit more crisp sound (compared to silk). The sound might be more "forward" compared to the sound of a silk tweet. Frequency does not tend to roll off quite like the silks.

If your tweets are up high (sail panels or a-pillars) I might suggest starting with the silks. If your tweets are lower (lower door or kickpanel), I might suggest starting with the aluminum. Of course, this is just a starting point...there are very few definates in auto sound.

I have not experienced the breakup of the hex cones that you are talking aobut. Mine have been in my car for nearly 4 years now...but dont get played every day. When they do get used though, they typically get handed some difficult material (jazz, orchestra, classical, and rock) for critical listening.

Just my experiences...

John