Alright finally got some updates to share with you guys. I was able to get the rest of the car painted and cleared. I think everything turned out pretty good, no runs or sagging anywhere and it appears the the metallics were spread evenly. I'm going to wait for a sunny day so I can pull the car out and get a good look at it.

I was able to spray the base coat on Sunday and had to wait until today to spray the clear coat. It got too cold to fast when the sun went down on Sunday so I figured it would have been better to wait. The only problem that I found was I had the air lines that run to the paint booth hooked up to the wrong side of the air compressor. This made it to where there was way to much pressure coming to the spray gun. Because of this a lot of trash ended up in my clear coat, as all the dust was being stirred up. I've been doing a lot of research on color sanding and I've decided that I'm going to start with 1500 grit and work my way up in 500 grit increments all the way up to 3000 grit. Let me know what you guys think, I think that I should be able to get most of the trash out with color sanding and buffing. Thanks for the comments so far and I welcome any advice. Try to ignore the quality of the photos, I used my cell phone to take the pictures and there was still quite a bit of clear coat still floating around the paint booth lol.