Small block chevy v8 into a 240sx

[Romeyo07]

I've seen it done, curious to know what you guys think. Personally I'd love to give it a shot. Not any time soon, but I'm gonna look into it.

[Blitanicle99]

Oh god.... Make this easier on yourself get a 302 because the distributor is in a better place. Alot of yota guys swap 350s in and and you have to cut the firewall. So get the 302, (it may be ford) but its actrully an easier swap. But if it was me I would cut the frame and extend it maybe a 8-10 inches and drop a 455 big block, munchie 4 spd in that sucker. And just cut the hood up. But then again... Im a redneck and thats what I do lol

[Turbodude06]

their is an RX-7 with an LS1 in it that runs around Barret all the time it sounds turbo cause its so deep sounding.

[AE86 Dorifto]

Don't do it. It throws the weight balance off....... And it's disgusting to have an American engine in a Japanese car. Get an sr20det. They can have 800 hp and still be reliable.

[thursdaybuff]

^^i agree. i've seen the v8 conversion on some 300zx's and to me, it's just not meant to be. it kinda defeats the purpose of having a japanese car.

[BABY J]

Don't do it. It throws the weight balance off....... And it's disgusting to have an American engine in a Japanese car. Get an sr20det. They can have 800 hp and still be reliable.

Yeah, it's disgusting --> www.darius240z.com

[1439/2000]

V8's in old z's are sick.

And by the way, no 800 hp sr20 is reliable.

What the fuck are you noobs thinking?

The weight balance isnt thrown off very much considering, you can have the car corner weighted with a nice suspension setup and you'll be fine.

But for the money you can just swap in a nicer motor that bolts up.

[FDslider]

if you threw in an LS1, well, with the proper mounting, then the weight balance would be better than that with an SR + the LS1 weighs less than the SR.

YES IT DOES, I WEIGHED THE 2 ON THE SAME DAMN SCALE!

[ECMgarrett]

man some people are just fucking idiots about japanese bullshit.
dude, put the v8 in there and show these fuckers what tq is "oh but its not jdm...." hahaha FUCKERS

[1439/2000]

man some people are just fucking idiots about japanese bullshit.
dude, put the v8 in there and show these fuckers what tq is "oh but its not jdm...." hahaha FUCKERS

My car makes more tq than hp. So did my s14.

[BABY J]

Nissans typically do... but that's kool that your VR4 does. I just found 1 (gallant vr4) in Jonesboro... gonna ask the guy if it's for sale.

[mrdriftr]

i made more tq than hp to... :-)

[CRAZY_JAY]

Yeah, it's disgusting --> www.darius240z.com

His car is sick! Check out his Ducati 748 shifter kart. As for the V8 question, I think it is a great idea.

[2.0civic]

V8's in old z's are sick.

And by the way, no 800 hp sr20 is reliable.

What the fuck are you noobs thinking?

The weight balance isnt thrown off very much considering, you can have the car corner weighted with a nice suspension setup and you'll be fine.

But for the money you can just swap in a nicer motor that bolts up.

holy shit man. thats the best post i think ive ever seen you make. +1 for you!! but you hit the nail on teh head with the reliable 800hp sr20 shot

[yudalicious]

don't do it, the JDM fanboys won't be happy... a domestic engine in a Japanese car will surely throw off the balance of the car, even though the engine itself doesn't weigh more.

[EJ25RUN]

personally.... i do a 20b swap.... not cause its JdM TyTe Yo

just never seen that done before

[BigPoppaHurtm]

Do an f20c. It can handle up to 460 hp on the stock block...

[secondgencamaro]

You can build a mild 350 with 325hp/400 ft.lbs for $1500. That is with a very mild cam and a vacuum secondary carb (We were looking into building a motor for my friends '78 Buick Regal). In such a light car, you'd be stupid fast with 16MPGcity/19MPGhighway with a TH-350 tranny behind it. If it is not DD you could go alot more extreme with the motor. That one we just panned out to be a cheap, torquey motor with good mileage for a daily. Besides, you could always go SBC-TT. JDM is getting wore thin real quick in my mind. It is just the current bandwagon. Do what you want with your money. I personaly think you'd have more fun with the SBC 240. I'd be faster than all these SR20DETT cars running around and it'd be different. Also, I don't think you'd care about weight distribution if you would think about this swap.

Power to weight ratio > weight distribution

[2.0civic]

You can build a mild 350 with 325hp/400 ft.lbs for $1500. That is with a very mild cam and a vacuum secondary carb (We were looking into building a motor for my friends '78 Buick Regal). In such a light car, you'd be stupid fast with 16MPGcity/19MPGhighway with a TH-350 tranny behind it. If it is not DD you could go alot more extreme with the motor. That one we just panned out to be a cheap, torquey motor with good mileage for a daily. Besides, you could always go SBC-TT. JDM is getting wore thin real quick in my mind. It is just the current bandwagon. Do what you want with your money. I personaly think you'd have more fun with the SBC 240. I'd be faster than all these SR20DETT cars running around and it'd be different. Also, I don't think you'd care about weight distribution if you would think about this swap.

Power to weight ratio > weight distribution

no offense but i dont see a carbed 350 with a cam and a 3 speed auto getting that kind of mpg

[secondgencamaro]

no offense but i dont see a carbed 350 with a cam and a 3 speed auto getting that kind of mpg

You just gotta build right. The cam I was talking about was very mild and described for a daily or bracket car. With vacuum secondaries, you just gotta keep out of the pedal to keep from opening the secondaries. I get 16/18 out of my 305 all day if I drive nice. If I dont, 13/15. Depends on how throttle happy you are.


EDIT I was also assuming he used 2.83s or 3.08s. Anything shorter and I'd be afraid of breaking out the rear-end real easy 'cause of the weight of the car.

[2.0civic]

You just gotta build right. The cam I was talking about was very mild and described for a daily or bracket car. With vacuum secondaries, you just gotta keep out of the pedal to keep from opening the secondaries. I get 16/18 out of my 305 all day if I drive nice. If I dont, 13/15. Depends on how throttle happy you are.

you gotta take that rear end ratio into effect to cause if your talking about a 10bolt say with 3.73??'s itll be quick but barely tap the gas and youll be doing like 60 turning hell of some rpm

[secondgencamaro]

you gotta take that rear end ratio into effect to cause if your talking about a 10bolt say with 3.73??'s itll be quick but barely tap the gas and youll be doing like 60 turning hell of some rpm

I have 3.08s. I edited my last post when you posted this, lol.

[2.0civic]

lol, still though. that cam would have to be small as hell to get that. my cousin has a fuel injected 350 in his s10 and never gets on it and barely squeeks out 12/13 and thats only with 3.42's

[jdmcrx12]

yeah my uncles camaro got about 7 miles to the gallon with 650 hp and my mothers suburban only gets 14-18 with the stock 327 i dont think the gas mileage #s are corect

[jdmcrx12]

i would go ka24det personally i researched it and there some pushing 350 whp on stock bottom end

[2.0civic]

TISMO CONVERSION FTW!!!

[secondgencamaro]

yeah my uncles camaro got about 7 miles to the gallon with 650 hp and my mothers suburban only gets 14-18 with the stock 327 i dont think the gas mileage #s are corect

My dad built a mileage motor for towing a boat with his friend's truck. It had gobs of torque and got 18 hwy with a TH-350 and the boat attached. When I get the chance, i'll upload some print screens from Dyno2000 and show y'all the cam. I'm just not on the right computer now.

[BABY J]

Hey wicked. PM me. I gotta 91 Caprice collecting dust w/ a 305. Runs PERFECTLY... just have not registered it. Let's say I give you 2k limit... what would you do. Waiting.

[tattoodlude]

or you bore the 350 and runa 490/511 cam and put a toilet bowl of a carb on it and kiss gas milage good buy



that is why my toy sits outside rarely driven...

[EmotorsportsE]

383 stroker, can build one for aroun 2.5k, drop it into a old Z, boost it for anothe 2.5, and have yourself a good ole time. Also weren't there a couple of LS1 swapped drift cars at this years D1 event? Yeah!

E

[Leadfoot_mf]

383 stroker, can build one for aroun 2.5k, drop it into a old Z, boost it for anothe 2.5, and have yourself a good ole time. Also weren't there a couple of LS1 swapped drift cars at this years D1 event? Yeah!

E

yeah mike peters was running an ls1 240 but broke the clutch linkage. i didnt get to see it but i talked to him about it. i hope he sorts it out for next race and brings it back. there is no replacement for displacement

[jdmcrx12]

that defeats buying a 240