umm..... you should just make your own down pipe.

i dont like how you got your drain line...... i see you blowing that turbo in the future.......

a bad feed and drain is what kills most turbos......



you should also get a 90 degree bend welded on the turbo compressor housing...... turbonetics makes a cast weld elbow.....


honestly that turbo is going to make your budget build not so budgeted.....




i have a welder and could make you a downpipe...... for around 25 bux you can buy a 2.5 " multiple mandrel bend on ebay and get a o2 bung......

get 2 o2 bungs.... one for your ecu and one for the wide band the tuner will need.....


good luck