my build thats almost done

[all-mota]

The skunk 2 have 12.6 mm of lift with 264 duration on the intake and the exhaust has 11.9mm of lift at 264 duration.

The juns are 12mm of lift and 11.5 mm on exhaust both with 304 duration.I don't think there's going to be a.15-20 hp difference between the 2 cams.there 2 different cams aswell skunk 2 are more mid range power where jun is more top end

sure thing whatever you say man i've only seen it happen plenty of times i never said they will make 15 to 20 peak whp but they make more power everywhere over the jun 3's when setup properly. pro 1's and 2's make more power down low and up high compared the the jun 3's and make more torque along with having a better torque curve.
but if you don't believe me you can gladly try it yourself. or i'll give you the phone number to the guy that has done numerous cams test with rocket motorsports skunk2 crower jun endyne and every other cam on the market thats worth a crap.

my bro actually made more power with the jun3s than pro1s....go figure...

that can have alot to do with his setup or the person tuning the car the pro series cams need a nice intake manifold throttlebody and header to perform really well.