basic turbo engine build info needed.
i need to know a good camshaft kit one that will come with springs or atleast a reference to the correct springs for high boost. and should i replace my valves?should i do a basic rebuild on the head or get nasty with porting and bigger valves.im use to good old american iron so i gotta ask some of this is a little new..some of it
and what it the best reccomended head gasket for a d16y8
and how much hp will the stock igniton support and will i really need a msd box.
and also if i get me crank turned will it weaken the crank to where i should not run it with high boost the bottom end will be made up of eagle rods and im debating between vitara or higher dollar piston most likely vitaras and arp head studs rod bolts and so on.
1 more question i need to know the best rod and main bearing kit i can buy best quality.
if anyone as any ideas on the questions i have asked let me know and be serious. thanks
i lied one more question is there a such thing as a high performance oil pump and water pump for the d16y8?
and i have no idea at the moment of my hp goals or turbo size that is up in the air im am lookin to build a solid motor that can take a good bit of boost with ***stock cylinders**
Reply With Quote