D16

[southside]

LMAO ^^^

[ueyedgr8tness]

man my wife got her single built the other day were trying to break in now but so far i love it on 5lbs for a women she should be really happy with it when she can crank it up later

[allmotorX]

Lol you guys a silly

[SC3]

well i got a question then what can you get out of a d15b2 n/a with maybe 2500 cash for parts and labor with knowing machine shops to do labor and what exactly is the history on that motor would it be a good realiable build as a peppy built daily driver ??

[southside]

well i got a question then what can you get out of a d15b2 n/a with maybe 2500 cash for parts and labor with knowing machine shops to do labor and what exactly is the history on that motor would it be a good realiable build as a peppy built daily driver ??

Depending on what shop and parts.But alot of people say for the power you will make might as well put that amount of cash into a b series.But if you wanna be different whatever floats your boat.I would use Suzuki pistons friend is going to use those pistons.They are cheap and have a big dome.

[DustnU]

Good luck Casey!!!! I will be building a b7 block with a milled z6 head, sk2 valves, springs and retainers, crower stg 2 cam, zc pistons, sk2 int mani, 68mm t/b, G-SR injectors, 2 layer head gasket, hondata and I,H,E. We'll see what I can do puttin it in a fully gutted 95 cx if all goes well LOL. When we're done we'll run aight!!!!!

[DustnU]

oh yeah. my brother had a 93 cx fully gutted had a d16y8 with I,H,E and a chipped ecu ran low 14's all day. 13's will be easy with your build bro.

[98blackcivic]

lol good luck getting past 150whp

[98blackcivic]

Good luck Casey!!!! I will be building a b7 block with a milled z6 head, sk2 valves, springs and retainers, crower stg 2 cam, zc pistons, sk2 int mani, 68mm t/b, G-SR injectors, 2 layer head gasket, hondata and I,H,E. We'll see what I can do puttin it in a fully gutted 95 cx if all goes well LOL. When we're done we'll run aight!!!!!

damn nice
if youre doing that much, get that head ported and polished
also make sure you do other upgrades like msd ignition, fuel rail maybe bigger injectors..?
just upgrade stuff like that

[dorin48]

Craziest high hp hardware for a d series while keeping in a budget is:

Z6 head (straight ports vs. Y8's offset)
01+ Civic GX pistons
LS rods
ITBs (if really going cheapo then the Y8 manifold flows the best of a d's)
Bisimoto cam & valvetrain
and the other common stuffs: h/e bla bla

Minus the itbs it should still break 150 tuned

There is a guy in Washington state that has a old d15b2 with weber carbs, bisi valvetrain and cam, bisi header, and exhaust. Dyno'd 152 to the wheels on the original 150K mile bottom end.

[pinedo88]

z6 head wit some p29 pistons.

[allmotorX]

Good luck Casey!!!! I will be building a b7 block with a milled z6 head, sk2 valves, springs and retainers, crower stg 2 cam, zc pistons, sk2 int mani, 68mm t/b, G-SR injectors, 2 layer head gasket, hondata and I,H,E. We'll see what I can do puttin it in a fully gutted 95 cx if all goes well LOL. When we're done we'll run aight!!!!!

I wanna run you when you get done if thats cool, and that 68mm tb will be overkill!!! But do as you please

[DustnU]

Ok. What do you have? And I have been thinking about that 68mm t/b. I will prolly go with a 62 instead. Parts are slowly coming so it might be a while.

[Starrfire]

Oh, and gsr injectors are the same as your b7 injectors

[allmotorX]

Ok. What do you have? And I have been thinking about that 68mm t/b. I will prolly go with a 62 instead. Parts are slowly coming so it might be a while.

I have slightly modded z6. If i were you i wouldn't go higher than a 60mm tb that way you wont loose much bottem end

[DustnU]

Oh, and gsr injectors are the same as your b7 injectors

Thanks! Didn't know that. And we'll see about the t/b may just leave it stock to save some ca$h!!!! If anyone else has any pointers for me they are greatly appreciated, this is my 1st build EVER!!!!!!!

[KDM>JDM]

I have slightly modded z6. If i were you i wouldn't go higher than a 60mm tb that way you wont loose much bottem end

Did you ever go pick your car up?

[allmotorX]

Did you ever go pick your car up?

No not yet

[southside]

No not yet

DAMNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN whats taking these JJspec people so long.Doesnt seem like they take their customers serious.

[allmotorX]

DAMNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN whats taking these JJspec people so long.Doesnt seem like they take their customers serious.

lol that aint the problem

[KDM>JDM]

cars been done

[JJSPEC Racing]

DAMNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN whats taking these JJspec people so long.Doesnt seem like they take their customers serious.

We do take our customers serious. That car is going to be serious when it is tuned! Nice project allmotorX has going on!

[CaTcH22]

DAMNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN whats taking these JJspec people so long.Doesnt seem like they take their customers serious.

Yeah man, dont jump to conclusions and go shop bashing if you dont know the whole story.

[Evil Goat]

True, the car was completed over 2 weeks ago....We can't wait to see what kinda #'s this thing puts down!

[DustnU]

slightly modded z6 huh???????? RIGHT!!! I guess we'll see when I'm done hope you put down good #'s though!!!

[DustnU]

what do yall think about a vx block and z6 head combo???????? WORTH IT OR NOT??? I have a b7,z6 and a z1 block and b7, two z6 and two y8 heads as well.