im all motor running 13.8 in the 1/4

[BABY J]

lol. pwnt.

[2.0civic]

OK im not your buddy it isnt a stock b16 it does have cams skunk 2 stage2 dc-header 4-1 p&p head lsd port matched intake ECU it is sleeved and bored but i tired of explianing things to you I dont have to so fuck ya and see ya

what cams do you have? must be beastly...your header adds like 3 hp lol...what did you have done to the head too

people get pissed cause other people run faster times with less mods then people with serious mods and dont want to believe it

most people on here dont have sleeved blocks

oh yeah it dont matter any more cause i drop a valve last night the car is shit now so laugh it up ha ha ha it is funny thought anybody need any parts

you should sell that "built" motor you have...

lol. pwnt.

not really i just think if he had a over 200 whp NA B series, someone else on here could back him up

[BABY J]

Hey jdm - where are you shifting at??

[boostedb16]

hey he lives his life 13 seconds at a time.

[gijoe0720]

I call bs cause Steele does not prep there track that good. As someone said ealier snatch ran a 14.2 on drag slicks there and I ran a 15.8 on street tires spinning all the way through third gear. Me and Matt(snatch) ran on the street and I would get him.

[AnthonyF]

holy shit. nice numbers man! damn u light cars!!


do you know what u weighed?? i'm 3600lbs. yea-uh!

[KevinT707]

holy shit. nice numbers man! damn u light cars!!


do you know what u weighed?? i'm 3600lbs. yea-uh!

Heavy Chevy foO!

[boosted_nonv]

Heavy Chevy foO!

I swear he has a mustang in his sig

[boosted_nonv]

And i never understand why everyone on IA thinks that if ya car is fast we would all know on here, that shit is funny, alot of people think its too much petty drama on here, if the guy runs 13.8 just call in out and run him on the street or something before calling it BS, so if it is actually slow or fast we all could see the results, Triniboy out

[xext12mvx]

BULLSHIT 13.8 ON STREET TIRES ON CRX U MIGHT RAN 14.5

[Vteckidd]

its possible, johnzm ran 13.2s with 165whp an slicks in a 1800lb chassis.

on street tires i find it hard to beleive a b16 could go that fast. i just dont think a FWD car will get anywhere near the 60ft required to run that fast with a 150-160whp car.

[Vteckidd]

i really dont see how a 2.1 60ft will run that fast.

my GSR CRX ran 13.8 with 190whp on kuhmp HP4 passenger tires with a 2.0-2.1 60ft

i had 190whp and a 13x TQ and i was revving to 9900 with LSD. i would finish the 1/4 in 3rd gear.

I just dont see a b16 being able to do it. an if you have a 200-215whp b16, then i would know who you are, because you just set records

[AnthonyF]

I swear he has a mustang in his sig

his vizion blurrry. all he saw was red flash. lol. j/p

[KevinT707]

I'm calling this guy out to a 60-120 pull. Accept or not?

[2.0civic]

i really dont see how a 2.1 60ft will run that fast.

my GSR CRX ran 13.8 with 190whp on kuhmp HP4 passenger tires with a 2.0-2.1 60ft

i had 190whp and a 13x TQ and i was revving to 9900 with LSD. i would finish the 1/4 in 3rd gear.

I just dont see a b16 being able to do it. an if you have a 200-215whp b16, then i would know who you are, because you just set records

i knew you would pop up in here eventually

[2.0civic]

holy shit. nice numbers man! damn u light cars!!


do you know what u weighed?? i'm 3600lbs. yea-uh!

how did you gain almost 300 pounds over stock

a fully loaded GT is 3,450......

[gijoe0720]

how did you gain almost 300 pounds over stock

a fully loaded GT is 3,450......

How did you pass math?

3,600-3,450=150. That isn't that close to 300

[2.0civic]

How did you pass math?

3,600-3,450=150. That isn't that close to 300

before you try to call me out on math, notice i said "fully loaded GT" (thats a v8 with leather blah blah blah)

The v6 (AS trymy4.0s car is) weighs in a Tad under 3300 pounds....


Thanks though

[sleepys4]

How fast was vteckidd 237 whp car in quarter?

[2.0civic]

lol slow....too much wheelspin..

j/k

[jdmcrxfreek]

I'm calling this guy out to a 60-120 pull. Accept or not?

I GUESS YOU CANT READ SO GO BACK A COUPLE OF PAGES WHEN YOU WERE BITCHING BEFORE LIKE THE LITTLE GIRL YOU ARE....AND SEE WHERE I DROPPED A VALVE...SO SHUT UP =]

[Black R]

OK im not your buddy it isnt a stock b16 it does have cams skunk 2 stage2 dc-header 4-1 p&p head lsd port matched intake ECU it is sleeved and bored but i tired of explianing things to you I dont have to so fuck ya and see ya

This explains it all right here.

It's not even a b16 except for the stamp on the block, and with headwork I'd expect him to be pushing 200whp with a built bottom end.

[2.0civic]

This explains it all right here.

It's not even a b16 except for the stamp on the block, and with headwork I'd expect him to be pushing 200whp with a built bottom end.

Im still calling BS lol

[BABY J]

I still wanna know about this magic carpet prototype ECU.

[WhiteAccord]

I GUESS YOU CANT READ SO GO BACK A COUPLE OF PAGES WHEN YOU WERE BITCHING BEFORE LIKE THE LITTLE GIRL YOU ARE....AND SEE WHERE I DROPPED A VALVE...SO SHUT UP =]

Why dont you just run kevin and get it over with caus obviously you have no proof(vid) of the run, you have time slips but those can be made up... if you have that 13 sec potential, then you should have the balls to run a 14 sec car... Then basically if you dont run... YOUR ONE LYING SACK OF SHIT...

[Benefit]

he dropped a valve , his car isnt running anymore...i believe him though

[Nissangeek]

I bet he remembered not to granny shift, and to double clutch like you're supposed too, and thats how he was able to do it. Either that or it was the direct port NOS with a fogger kit. lol.

[Mr2raceworks]

LS VTEC will get your better numbers

[lsxtreme]

OK im not your buddy it isnt a stock b16 it does have cams skunk 2 stage2 dc-header 4-1 p&p head lsd port matched intake ECU it is sleeved and bored but i tired of explianing things to you I dont have to so fuck ya and see ya

hmm now everything sounds nice and all.. but running 13.8s is believable.. just like my buddys civic sedan.. and kevin and vouch.....

bored out, sleeved.. why?? i understand the bore .. but why the sleeves.. your N/A right or are you sleeved for further plans down the road..? but watever it is.. just scan that timeslip.. and ................ u know the rest..

[Black R]

sleeved you can go 87mm max, so that's probably why..... "it's just a b16"

[Tech5]

humm

[Tech5]

tell us the specs of your cam?? like duration lift etc, ? like to know? thanks Asshole

[Tech5]

Also why get mad when we call you out on your word that this car runs 13.8 an NO proof sounds like you trying to get big headed on here an to make someone to be like aww man that is a bad ass ride ,that shit is fast as hell, but knowing yourself its still is a Piece of shit Sohc Tbi

[allmotoronly]

yea talk is useless without proof. and obviously if you spent all that money sleeving the block and on prototype ECU's and whatthefuckever else, then you would have had some decent valve springs and retainers and hopefully would not "drop a valve". I have ran the hell out of my cars, over revved a few times, and never "dropped a valve". I bent a valve once when I was trying to show off and did a 4th to 3rd at 120. The engine pulled about 12k rpm, and the valve bent, not "dropped" but bent.

[Mr_S13®]

Nice driving :thumbsup

[chsdog55]

Im not saying it isnt possible because i witnessed a hatch at Steele this weekend turn 13.9 but he had a b18 bored and was pushing somewhere around 220whp. His is on street tires and spinning through 1st off the rev limit so with slicks i could see 13.7 or maybe 13.6