Results 1 to 12 of 12

Thread: Dyno'd the car at DynoLab in Marietta yesterday, pics inside

Hybrid View

  1. #1
    MetroSpeed3
    Join Date
    Feb 2009
    Location
    Atlanta, GA
    Age
    41
    Posts
    11
    Rep Power
    0

    Default Dyno'd the car at DynoLab in Marietta yesterday, pics inside

    Mods are in sig, dyno picture is attached. The dyno is accurate as there was a 134hp VW Jetta wagon on there that put down around 109 to the wheels with a manual. Runs were in 4th gear (1:1) with the hood down. Did two runs and both were within 1-2 hp and tq.


    ---------------------

    2008 Mazdaspeed3 Sport
    Metropolitan Gray / 6spd Manual

    - Mazdaspeed Intake (Short Ram Setup)
    - AEM MAF Straightener
    - HTP Powdercoated 2.5" Turbo Inlet Pipe
    - OEM Tuning
    - OEM Intercooler
    - OEM BPV
    - OEM Exhaust w/Two Deleted Resonators

    Dyno: 264whp / 292wtq

  2. #2
    Senior Member Bruce Leroy's Avatar
    Join Date
    Mar 2006
    Age
    39
    Posts
    3,324
    Rep Power
    23

    Default

    nice numbers.... wrong section

  3. #3
    AmbitiousButRubbish EJ25RUN's Avatar
    Join Date
    Sep 2005
    Location
    Daytona Beach
    Age
    38
    Posts
    15,152
    Rep Power
    45

    Default

    Quote Originally Posted by Bruce Leroy
    nice numbers.... wrong section
    Correct.

    I don't remember a dyno being racing.

  4. #4
    JDM TYTE AnthonyF's Avatar
    Join Date
    Aug 2003
    Location
    Cumming
    Posts
    24,318
    Rep Power
    61

    Default

    dynolab = Arthur is tha man!

    -Ant.
    The Carbon Fibered R6

  5. #5
    530TQ + FWD = FAIL!! Kason23's Avatar
    Join Date
    Jan 2007
    Location
    Rockmart
    Age
    43
    Posts
    582
    Rep Power
    19

    Default

    Quote Originally Posted by AnthonyF
    dynolab = Arthur is tha man!

    -Ant.
    X2 ..thats where I always go.
    Neon PoWa
    Now Delta 46 equipped
    432whp/425wtq on lower boost

  6. #6
    Ghost AirMax95's Avatar
    Join Date
    Jun 2005
    Location
    On a Plane
    Posts
    4,431
    Rep Power
    27

    Default

    Nice numbers! I heard these cars had potential, but wow.

  7. #7
    Chadbee Photography CHADbee's Avatar
    Join Date
    Oct 2005
    Location
    Kennesaw
    Posts
    20,312
    Rep Power
    50

    Default

    nice numbers, i want to line them up if you ever take it out the the track

  8. #8
    MetroSpeed3
    Join Date
    Feb 2009
    Location
    Atlanta, GA
    Age
    41
    Posts
    11
    Rep Power
    0

    Default

    What's your SRT-4 running at the track these days (assuming based on your sig)? Mods?

    I always did like those cars. Not a huge fan of the exhaust tone but they were fast and reliable. Much nicer than the new Cobalt SS Turbo too, that think is plastic econo-heaven with a turbo engine. They're looking for $25k+ sometimes for those things. What I did not like was the shady dealers where i went to test drive one who kept pulling some tubes off to let the turbo hit 20+psi so the customer would really want the car. I should have told their Corporate division about that in Savannah.

    I have not been out yet in this car. The Speed3's are rated at 14.0-13.9 stock, which is about 225hp and 240tq at the wheels. Dunno though what it will do with the traction issues I am having.
    ---------------------

    2008 Mazdaspeed3 Sport
    Metropolitan Gray / 6spd Manual

    - Mazdaspeed Intake (Short Ram Setup)
    - AEM MAF Straightener
    - HTP Powdercoated 2.5" Turbo Inlet Pipe
    - OEM Tuning
    - OEM Intercooler
    - OEM BPV
    - OEM Exhaust w/Two Deleted Resonators

    Dyno: 264whp / 292wtq

  9. #9
    Chadbee Photography CHADbee's Avatar
    Join Date
    Oct 2005
    Location
    Kennesaw
    Posts
    20,312
    Rep Power
    50

    Default

    Quote Originally Posted by cboney
    What's your SRT-4 running at the track these days (assuming based on your sig)? Mods?

    I always did like those cars. Not a huge fan of the exhaust tone but they were fast and reliable. Much nicer than the new Cobalt SS Turbo too, that think is plastic econo-heaven with a turbo engine. They're looking for $25k+ sometimes for those things. What I did not like was the shady dealers where i went to test drive one who kept pulling some tubes off to let the turbo hit 20+psi so the customer would really want the car. I should have told their Corporate division about that in Savannah.

    I have not been out yet in this car. The Speed3's are rated at 14.0-13.9 stock, which is about 225hp and 240tq at the wheels. Dunno though what it will do with the traction issues I am having.
    i like the SS's cause of the brakes and suspension, both are far superior to ours =/

    ran 13.2 at SDR with intake, wastegate with 3 more PSI than stock and a catless 3 inch downpipe with cut-out on stock tune.

    screw traction issues just get some GOOD tires, like non DOT ones

  10. #10
    aka....RAFA RJ's325ITS's Avatar
    Join Date
    Jul 2006
    Location
    Stockbridge, Ga.
    Posts
    728
    Rep Power
    20

    Default

    Arthur is the shit

    TRM Stage 2 │TRM Coilovers │ TRM Pistons │ TRM Blowthrough Tuning │ TRM MAF & Injectors │ Watch My Crazy Videos

  11. #11
    Needs More powa!! sleepys4's Avatar
    Join Date
    Jun 2006
    Location
    In a mansion
    Age
    38
    Posts
    2,297
    Rep Power
    23

    Default

    A friend of mine was their dynoing his car yesterday.black gti.

  12. #12
    Certified Gearhead SiKsTanG16's Avatar
    Join Date
    Oct 2008
    Location
    Winder
    Age
    37
    Posts
    252
    Rep Power
    18

    Default

    I dyno'd the stang there a few weeks ago. Nice place and nice guy.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!