Top 5 IA kills forum cars ( Street/track racers only ) !!

[ZOSICK]

5 cars out? I hope you weren't talking to me. Not sure about built drag car but its a hot 429 ls3/7 hybrid built in my kitchen by yours truly, with a 4l80/transbrake and some other misc. go fast things. . Makes a touch over 600 to the tire on motor through the automagic with a little extra for hurting feelings on occasion.

Wasnt talking to you ... i was speaking to draggbody. but im curious how do you have a ls3/ls7

Zosick makes ruffly 800whp with his 2 kits on... And it's only slow cause he can't drive it!!

I only need to use one kit smart guy.. only reason for second baby shot is if im dig racing with slicks and wanting to leave on spry in 1-2 then hit the who's yo daddy kit in 3rd if needed... recess time ..

Pick up the new issue of super street and look at the article of the crazy 640whp mazda 3 in there...
Then do a youtube search. There's a few videos of me pulling him on the highway.
I'll probably be around July sometime. When it's more convenient and I'm in the area I'll make a callout. We'll see.

Make the call out ill be here ... but i dont run for free

[Dietcoke]

Wasnt talking to you ... i was speaking to draggbody. but im curious how do you have a ls3/ls7

Ls7 top with modified valve angle on an LS3 bottom

[ZOSICK]

Ls7 top with modified valve angle on an LS3 bottom

Thats differnt.. what bore did ya go with ? Just wondering why that head set up


Not trying to bust your balls but if you stroked the 6.2 ls3 to 429 the power adder options are very limited due to piston and stroke.... Im guessing your at a 4.1 bore on stock deck height but then you said you have spry so a good nitrous piston your suppose to stay away from the 4.1 stroke.... as you increase stroke your piston gets smaller or your rod gets smaller both of which are not good on a nitrous motor.. which limits you to a 100-150 max

So make the call out and ill show you why a simple street motor vette is on top of the list

[Dietcoke]

Thats differnt.. what bore did ya go with ? Just wondering why that head set up


Not trying to bust your balls but if you stroked the 6.2 ls3 to 429 the power adder options are very limited due to piston and stroke.... Im guessing your at a 4.1 bore on stock deck height but then you said you have spry so a good nitrous piston your suppose to stay away from the 4.1 stroke.... as you increase stroke your piston gets smaller or your rod gets smaller both of which are not good on a nitrous motor.. which limits you to a 100-150 max

So make the call out and ill show you why a simple street motor vette is on top of the list

I make over 600 n/a through an automatic... good luck doing that with ls3 heads. I promise I know how to put a motor together. I didn't pay a shop to do it for me. Lulz. Couple months.

Edit: It's 4.07*4.125
Also "piston (or rod) gets smaller?" Are you fucking retarded? Lolol. Good thing LWA built your shit. At least they have a clue.



Plenty of piston there capn.

[ZOSICK]

I make over 600 n/a through an automatic... good luck doing that with ls3 heads. I promise I know how to put a motor together. I didn't pay a shop to do it for me. Lulz. Couple months.
Edit: It's 4.07*4.125
Also "piston (or rod) gets smaller?" Are you fucking retarded? Lolol. Good thing LWA built your shit. At least they have a clue.
Plenty of piston there capn.

Obviously you dont have anyclue ^ if 2 months is along time to built a car..so i wont argue! But you bored the block, balance the new crank, clearanced the pistons, ported the heads, did the valve job, etc etc etc all in your garage.. thats damn pretty impressive i gotta see this garage

lets see the dyno sheets my friend since your not hiding the power 600 plus in auto is great!!! Since you said it had spray im just saying i know it cant be to big of a shot due to your stroke and piston.. so go ahead and think what you want..

Tell ya what Ill run your 600 plus hp motor vs Me all motor for a little cabbage ?

Because i would really hurt your feelings if we ran spray for spray for my spot on the list

[Dietcoke]

Obviously you dont have anyclue ^ if 2 months is along time to built a car..so i wont argue! But you bored the block, balance the new crank, clearanced the pistons, ported the heads, did the valve job, etc etc etc all in your garage.. thats damn pretty impressive i gotta see this garage

lets see the dyno sheets my friend since your not hiding the power 600 plus in auto is great!!! Since you said it had spray im just saying i know it cant be to big of a shot due to your stroke and piston.. so go ahead and think what you want..

Tell ya what Ill run your 600 plus hp motor vs Me all motor for a little cabbage ?

Because i would really hurt your feelings if we ran spray for spray for my spot on the list

Couple months as in I'll be in GA in couple months. Explain to me how exactly you clearance pistons again? Lolol.

[1civic]

Careful, he knows it all.. He is a owner of a consruction company and makes 6 figures!!

Couple months as in I'll be in GA in couple months. Explain to me how exactly you clearance pistons again? Lolol.