636 against blown z06

[onebadgt]

so with hopefully warmer weather approaching sometime in the near future, also now that i have installed my dry nitrous dual nozzle kit on my 636 i want to see how it compares to a blown Z06. according to another guy from one of the ZX forums his 636 with the same kit blew away a blown Z06. iam thinking not soo much. my 636 has a gearing change of -1 front +2 back and dry nitrous kit but i don't know if it will beat up on a blown z06. just curious to see. anybody on IA with a blown z06? if so post some numbers.

mine are: 2005 ZX6R 636, gearing of -1/+2, dry nitrous kit, dynojet power commander 3. who knows of excact numbers (never had her on the dyno myself) but should be putting out over 120hp

your buddys full of it. with those mods if you run about a 30shot you should be close to my pwr level on my 750, and i would say im about even with a 550rwhp vette. after that id say the vette has the adv. if you grab hold of like a 700whp blown vette hes gonna make your bike look stupid

[iloveboost]

What speed you want to go from?

[ueyedgr8tness]

What speed you want to go from?

he would def have to go from a low speed and try to keep the front down because bikes fall on there face most of the time when they pass 120mph theyget alot slower

[onebadgt]

What speed you want to go from?

ill go from a 40 kick lol

[dLux636]

your buddys full of it. with those mods if you run about a 30shot you should be close to my pwr level on my 750, and i would say im about even with a 550rwhp vette. after that id say the vette has the adv. if you grab hold of like a 700whp blown vette hes gonna make your bike look stupid

its not my buddy, just a guy i know from a ZXR forum. and i too thought he was exagerating a bit. but is your 750 stock? i hope not. because stock 636's run the 1/4 at alomost the same times as a 750. with my mods i would destroy a stock 750. 636's have awesome top end. thats why i thought maybe this guy could be right.

[onebadgt]

its not my buddy, just a guy i know from a ZXR forum. and i too thought he was exagerating a bit. but is your 750 stock? i hope not. because stock 636's run the 1/4 at alomost the same times as a 750. with my mods i would destroy a stock 750. 636's have awesome top end. thats why i thought maybe this guy could be right.

no they dont, the 636 are faster than the other 600s by a bit but go check out stock trap speeds. the gsxr 750 traps about 10mph faster than a 636. and no my bike is not stock i would say with your sprocket, pcIII you should be close to a 750. you def would not destroy them. most 750s make 123-130whp stock

[dLux636]

no they dont, the 636 are faster than the other 600s by a bit but go check out stock trap speeds. the gsxr 750 traps about 10mph faster than a 636. and no my bike is not stock i would say with your sprocket, pcIII you should be close to a 750. you def would not destroy them. most 750s make 123-130whp stock

636- http://www.dragtimes.com/Kawasaki-Ni...lip-11948.html

750- http://www.dragtimes.com/Suzuki-GSX-...slip-8014.html

this does not prove that much i know, but it does prove that 636's will ride up there with the 750's. the gap between a 750 and the 636 is never much

[onebadgt]

636- http://www.dragtimes.com/Kawasaki-Ni...lip-11948.html

750- http://www.dragtimes.com/Suzuki-GSX-...slip-8014.html

this does not prove that much i know, but it does prove that 636's will ride up there with the 750's. the gap between a 750 and the 636 is never much

try finding a 06 750, they dropped alotta weight and havemore pwr than the 05s. n i see your point, but i personally have never seen a stock 636 trap over 127. and thats a good friend of mines who weighs about 160 and is a hell of a rider

[GTslOw]

636- http://www.dragtimes.com/Kawasaki-Ni...lip-11948.html

750- http://www.dragtimes.com/Suzuki-GSX-...slip-8014.html

this does not prove that much i know, but it does prove that 636's will ride up there with the 750's. the gap between a 750 and the 636 is never much

the 750 ran in hawaii and the 636 ran in california with a very low density altitude bad comparison

[FAHHQUE700]

the 750 ran in hawaii and the 636 ran in california with a very low density altitude bad comparison

Smart guy, I was wondering if somebody was going to pick up on that...


Kawasaki ZX636 < Suzuki GSXR750

I've raced, and riden both.... hands down no comparison. I have a friend who ownes a new 750, and he said it's just as fast out on the highway as his 954. I think he might be stretching it a little, but the 750 defiantly is no joke.

[onebadgt]

Smart guy, I was wondering if somebody was going to pick up on that...


Kawasaki ZX636 < Suzuki GSXR750

I've raced, and riden both.... hands down no comparison. I have a friend who ownes a new 750, and he said it's just as fast out on the highway as his 954. I think he might be stretching it a little, but the 750 defiantly is no joke.

from a 70 kick a new 750 will prob pull a 954 if not be side by side, the 954 has a huge tq adv. it really helps them down low

[dLux636]

Smart guy, I was wondering if somebody was going to pick up on that...


Kawasaki ZX636 < Suzuki GSXR750

I've raced, and riden both.... hands down no comparison. I have a friend who ownes a new 750, and he said it's just as fast out on the highway as his 954. I think he might be stretching it a little, but the 750 defiantly is no joke.

the new 750 is way lighter, but my 636 is a 05 so iam comparing to an 05 750. a 750 is faster than a 636, but not by much. and about the comparison, sorry had to find something real quick and that is all i could find. and i to think that your friend is stretching it with being as fast a 954 on the highway. he might be close but sorry i would prefer a 954 over a 636 or 750 any day. in my opinion one of the best bikes ever made. fast as fu(k and having a honda frame which means nothing breaks it. cant beat it.
i don't hate on gixxers but what is too light? too light having to worry that you might snap your frame when you hit a pothole. the new gixxers might be fast and light but i don't ever want something like that to happen to me
pics below.