Lil Shop addition progress.

[BUGMAN]

We had a little time today so we accomplished a lil more trying to get it ready for use. Hopefully be finished and playing in it by next week sometime.

[redrumracer]

i see a lone miata wheel up in the corner there.

[BKgen®]

nice! i wish my shop was that big

[KREEP]

Sweet more space for more ponies/ anything with lots of horsies
Its coming along great!

[redrumracer]

nice! i wish my shop was that big

lol thats only one part of his shop. he has a really nice shop. and when i say nice dont underestimate the word nice.

[SixSquared]

holy crap, Chris! NICE add on!

[santacruz77]

can i live in it and pay really cheap rent

[Elbow]

Looks good!

[Athens_Red_Rexin]

Nice!

[yogi08]

put me a bed near one the xbox 360s looks good man. hope you got my package in the mail.

[buddha@TeamFX]

Chris!!! Man you land is going to be covered with shops before its over with...I'm going to ride out there sometime and say hi I get bored sometimes since Razztus(Will) is always on the road with top fuel gig now...by the way do you have any convertible parts laying around I need some stuff for my grandfathers car?
Give the family my best!

[buddha@TeamFX]

Oh yeah...we all need to get together and go up and see that ole dawg in the mountains (Allan)...I haven't seen him since last year sometime...see if we can spy on his new project.

[Mr. Clean]

I WANT ONE!

[BUGMAN]

put me a bed near one the xbox 360s looks good man. hope you got my package in the mail.

Not yet. When did you ship it?

[BUGMAN]

Chris!!! Man you land is going to be covered with shops before its over with...I'm going to ride out there sometime and say hi I get bored sometimes since Razztus(Will) is always on the road with top fuel gig now...by the way do you have any convertible parts laying around I need some stuff for my grandfathers car?
Give the family my best!

I have an 84 complete that I am doing nothing with.

[BUGMAN]

i see a lone miata wheel up in the corner there.

I need 2 more dammit!!!

[yogi08]

I need 2 more dammit!!!

ive got the other two still here, we need to work out a pick up arrangement cause shipping would kill me even without tires.

i sent out the package on the 28th, and did 2 day shipping. i got the delivery confirmation number if you need it just give me a call.

[BUGMAN]

Oh I got that one I think that Monday. I thought you were talking about the wheels. Sorry about the misunderstanding but I did get the wheek key, etc.

[buddha@TeamFX]

I have an 84 complete that I am doing nothing with.

Cool I may come out and see you...I really just need a top motor...his has never worked since we got the car...I'm going to touch some things up on it then sell it.

[BUGMAN]

I will test the motor Monday when we get back in the shop and let ya know. If it is good then your welcome to it.

[dub_girl]

Nice....

[wwpms6]

i'm wanting to build a shop just like that. i was wondering how big it is?

[buddha@TeamFX]

I will test the motor Monday when we get back in the shop and let ya know. If it is good then your welcome to it.

Preciate Chris...I'm going to stop next thursday on my way up to rod run and stop and see Allan...the ole egg suckin dog!...

[BUGMAN]

i'm wanting to build a shop just like that. i was wondering how big it is?

The main shop is 30x50. Behind the Black Mustang is a 85 T-Top Mustang you can see in the last picture just to give you an idea of the space it has.

Looking past the lift you can see another room and then the new addition. The room in between them is where I keep most of the equipment as in the tire machine, press, parts washers, welders, plasma cutter, drill press, etc. This is the "messy" room with all the metal shavings, etc... This room is only 18x30 and was built strictly for the machinery to help keep the main shop a lil cleaner (didn't work).

[AlliRae]

looks great

[BUGMAN]

i'm wanting to build a shop just like that. i was wondering how big it is?

The new addition is only 30x40 and will be used mainly for storage and paint booth. The booth will be the farthest door from the shop and completely sealed off. We have caulked the entire addition, painted the floor and will be painting the walls next week.

Since your interested... The metal framed building was a gift from the wife with the lift and various other tools so I didn't have to lay on the concrete floor working on her cars anymore. No she doesn't have a sister.

The metal shop was 35k insulated and 8 inches of concrete for the slab (which was a majority of the cost). The addition that I just added which is wood framed was roughly 5-6k doing it all ourselves so far except for the concrete.

Here are a few shots of it where it is now. Yes I know it is bright purple but the kid's love it and that's all that matters! The purple actually made it look 1/2 the size.

[BUGMAN]

looks great

Ah you finally got my nudes did ya? JK...



Thanks! We have sweated our azz's off on this one. You gonna see it in person Saturday night right?

[dynoman14]

Chris,
Gotta be proud of that...a lot of hard work there, I know...

You'll have to come by our place, once we get out engine side put together... or come run on the dyno any time.

We have got a lot of equipment to move in the next couple weeks but it will eventually get there. I will mainly specialize in heads and carbs with the Serdi Head machine and Valve grinders, follow-up with Superflow bench.

We have other machines for balancing and block work but most folks are not willing to pay for high quality work so we will probably be doing existing customer work and almost anyhing for our own projects including, balancing, sleeves, boring, honing, surfacing etc.

I see you have a Dodge sitting around, need any Dodge Cup engine parts etc.

Got 850hp and 9500rpm ??? It is all Evernham and Penske stuff, I am a cherry picker as each of the engine shops has their good parts. I can usually assemble an ARCA engine capable of 850-870hp and they are as much as 20-30 better than the Cup teams ARCA engines.

Later,
Mark
dynoman14

[japan4racing]

shop looks rad man...i met you down at twiggs a couple weeks ago we were next t you with the really slow civic and the hotdogs...heard yall had probs with the track and dipped early..sorry to hear that but at least you got a rad ass shop and some quick ass stangs!!

[BUGMAN]

Chris,
Gotta be proud of that...a lot of hard work there, I know...

You'll have to come by our place, once we get out engine side put together... or come run on the dyno any time.

We have got a lot of equipment to move in the next couple weeks but it will eventually get there. I will mainly specialize in heads and carbs with the Serdi Head machine and Valve grinders, follow-up with Superflow bench.

We have other machines for balancing and block work but most folks are not willing to pay for high quality work so we will probably be doing existing customer work and almost anyhing for our own projects including, balancing, sleeves, boring, honing, surfacing etc.

I see you have a Dodge sitting around, need any Dodge Cup engine parts etc.

Got 850hp and 9500rpm ??? It is all Evernham and Penske stuff, I am a cherry picker as each of the engine shops has their good parts. I can usually assemble an ARCA engine capable of 850-870hp and they are as much as 20-30 better than the Cup teams ARCA engines.

Later,
Mark
dynoman14

Are you going to be doing any porting of heads by any chance? I always have someone asking for someone that is local to work heads and port them.

What is your addy? Someone told me that you were only 15-20 minutes from us.

[BUGMAN]

shop looks rad man...i met you down at twiggs a couple weeks ago we were next t you with the really slow civic and the hotdogs...heard yall had probs with the track and dipped early..sorry to hear that but at least you got a rad ass shop and some quick ass stangs!!

Honestly it was our own issue but the VP guy acted like a freaking prick so we came home and cooked some more dogs!

Your crowd is exactly what we expect when we pit beside someone at the track. Couldn't of asked for better people and we really enjoyed meting everyone of you.

Thanks again for the use of the grill and dogs, that was a blast.

Chris

[santacruz77]

oooo ooo i was in there not to lond ago... ive said it befor but ill say again your shops is nice as fauck along with pretty much eveything else you own haha. can i come play with you................................

[BUGMAN]

Oh yeah we destroyed the shop today painting the walls, putting up the ceiling fans, running wire and air outlets and whatever else to make it a disaster. Figured I would through up a few shot of it in it's worse stages just for fun.

I will update again Friday at the latest and see what it looks like by then. I won't have time to do anything on it until Friday am so it will sit in it's current stage until then.

Enjoy...

[BUGMAN]

Remember these were taken with a $25 camera phone.

[BUGMAN]

Last ones for now.

Oh and that Lasagna chit wasn't too bad for a Lean Cuisine.

[KREEP]

Looking good! When are you going to put that wall up for the PB?

[BUGMAN]

Looking good! When are you going to put that wall up for the PB?

Probably going to end up doing a "drop curtain" as soon as we get the filters and fans installed. Which of course will be shortly after we get power ran in the shop.