who bulds the best honda motors
who builds the best honda motors
who bulds the best honda motors
Honda
what? like a shop in town or nationwide or international...........
spoon
"I remember the first time I had sex – I kept the receipt."
If you're talking local; I'd go to Main Stream. My 600hp Honda was daily driven and sold last year. After 2 other owners, the most recent one bent some valves, but it's still going strong...
Originally Posted by dELfONiK
LOL at you Delfonik. There is alot of good shops local that can build nice motors. Its all in the machine work and assembly.
Truth
NISMO hands down
TRD - Toyota Racing Development
72 Datsun 510 goon SR
83 Datsun Maxima RB
80 Toyota Cressida 4M
Sk2 for drag racing...
hmm.. I'ma try their sleeve saving technology real soon.......CEMENT THAT BITCH
DART
X2
yeah they make one mean ass
K20A3-DET
Depends on what you want to do. OEm, HONDA for sure. Drag racing? there's so many places that build stuff it's hard to say, WHO is best.
i need someone in the ga area, like i said is going to do a good job, machining it and putting it together. i dont want to take it anywhere where there going to just slap it together. its goin to be for nitrous, fully built motor and head, b series. i want a place or person with good reviews that rarely has problems, problems are going to happen sometimes. about mainstream ive herd half bad and half good. i want a motor built but i want it done right.
High Compression + nitrous
or
low compression + nitrous
Which are you choosing to go with
10.5 to 1 plus nitrous so when no nitrous it will still have power like on the way to work.
10.5.1 and nitrous is fine. get it tuned and it'll be a fun daily driver. Since you're on the south side, hit up NV performance. He builds alot of high HP cars. He built AnclyT's car on here. He is rated 4th in the top 10 in the kills forum.
Local Shops:
Batlground aka Batlground.com or email [email protected]
Vuongs Garage -770-374-9449
Mainstream Performance 678-567-9384 aka mainstreamperformance.com
ILOVEBOOSTs motor was NOT built by mainstream, it was built by GOLDEN EAGLE in california.
However Mainstream did the turbo kit and tuning,top end assembly and the car made TONS of power. IIRC it still runs to this day over 40k miles later, not bad for a 630whp LS
Not trying to start anything daniel, just saying that GOLDEN EAGLE shipped that shortblock already assembled.
Which leads me to the next choice:
Golden Eagle Manufacturing can ship you a sleeved and assembled block for around $3200 with rods, pistons, sleeves, bearings , machine work already included. youll need to purchase the timing belt, oil pump, oil pan, etc seperately, but its a built motor backed with somewhat of a warranty.
It will all come down to preference. Call everyone, email everyone, ask around GA, and you will come to the answer you want.
All 4 places i listed you can trust.
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
I say Peter Hue that owned Import Source Performance,but now works at Balanced Performance Phone: (678) 546-3133.
He has Built alot of HIGH Hp honda/Acura in Ga. He also built his Nitrious Gsr motor, that he was spraying a 200 shot on.
or Peter at Balanced, i forgot he was over there!
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
It's been so long I forgot really...Local Shops:
Batlground aka Batlground.com or email [email protected]
Vuongs Garage -770-374-9449
Mainstream Performance 678-567-9384 aka mainstreamperformance.com
ILOVEBOOSTs motor was NOT built by mainstream, it was built by GOLDEN EAGLE in california.
However Mainstream did the turbo kit and tuning,top end assembly and the car made TONS of power. IIRC it still runs to this day over 40k miles later, not bad for a 630whp LS
Not trying to start anything daniel, just saying that GOLDEN EAGLE shipped that shortblock already assembled.
Which leads me to the next choice:
Golden Eagle Manufacturing can ship you a sleeved and assembled block for around $3200 with rods, pistons, sleeves, bearings , machine work already included. youll need to purchase the timing belt, oil pump, oil pan, etc seperately, but its a built motor backed with somewhat of a warranty.
It will all come down to preference. Call everyone, email everyone, ask around GA, and you will come to the answer you want.
All 4 places i listed you can trust.
I still think Charles/Main Stream are more than capable of building a high horsepower motor that lasts. And yes, the Integra is still running strong and is now on the 4th owner, lol. It was recently sold again. 4 different people beating on it and it's still going, lol.
LOL that thing gets passed around more than...........well, you know.
Mainstream is more than capable, of course, i wasnt trying to say they werent., i was merely going to list golden eagle as one of my choices, and i was going to use your motor as an example.
I could do it correctly without correcting you
do you ever miss it?
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
All the time. I kick myself for not getting slicks for it and running it, heh. I don't miss driving it, wasn't nearly as fun as the Z.LOL that thing gets passed around more than...........well, you know.
Mainstream is more than capable, of course, i wasnt trying to say they werent., i was merely going to list golden eagle as one of my choices, and i was going to use your motor as an example.
I could do it correctly without correcting you
do you ever miss it?
peter is slow and he doesnt know anything :P he's scared i'll spank that ass with the mighty 2JZ
he only knows what the mighty Bee tells him.
94 Supra= 500rwhp
To be honest, have the sleeving company do the build on the bottom end if you are after HIGH HP.(thats if you are sleeving it) They have all the precision measuring tools to make the clearance dead on versus using plastigage on bearings like most people do. OF course, more $$$ I am about to do a K-series 500HP RSX build for a customer and I am letting Laskey Racing ( Benson sleeves ) do the sleeves and bottom end assembly.
mainstream built the bottom end on my last boosted db8...it wasn't sleeved, just pistons and rods. and it ran like a champ, had no issues with it b4 i totalled the car, lol. i sold it to juanb...he had it in a civic and i think now is using that same motor in an integra shell. and that was a good 9 months or so ago...
i'd go with mainstream...fair prices and they stand by their work
Why in the hell would you let a "SHOP" build youre motor.
Why don't you go to a machine shop....its kinda what they do.
As you know, it takes more than a strong bottom end to keep a car together. My car has had 4 different owners since it was built last year. I doubt each and every one of them has taken it easy on the car too. It's still together and still running strong.
I dont' care to be in the middle of your crap slinging contest, but you can't deny MSPi has built great cars and will continue to do so. It's why they are still in business making people happy. They must be doing something right.
Posts deleted and thread cleaned up
stay on topic
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
A lot of machine shops don't particularly specialize in engine building.
Most engine building shops have some sort of machinist backround, and do the neccessary work in house. A place here in PA, Specializes in mostly big/small block V8's. However they've told me several times when I wanted a big bore done, that they'd do it for 150+ parts. Which isn't to bad deal, considering they'd have to bore, hone, and/or sleeve. I dont know for sure off hand.
Sure a machine shop would be good just for the clearance and such, but engine shops who do this work daily, would be my first choice. Hands down.
90% of teens say "oh shit" before a wreck. The other 10% are from Pennsylvania, they say " hold my beer and watch this shit."
EvasiveEF9: Just fill me in...if it's black, I'm all over it...
I don't know any machine shops that don't assemble.
Like i said b4. Mainstream Performance (MSPi) does great work at reasonable prices. Just ask for Joe 6 pack or Charles. LOL!!!!
is scotts machine shop in fayetteville any good
yes
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
^X2. I've used them many times.
thanks for the info guys, since i live in fayetteville i think im going to let scotts machine shop assemble the engine.
i guess next time im throwing something together in the garage ill let them do the boring, honing, and balancing. ill look em up in the phone book. besides, i heard mike jawnz talk about them quite often. he seems to know a lil bit more than nothing.
x2 Viet knows his shit!!
He's right off of Ga 54 in Forest Park.
Posting Permissions
Reply With Quote
