Results 1 to 5 of 5

Thread: Single Cam Starter PROBLEM

  1. #1
    Sohc Me Beautiful geezy's Avatar
    Join Date
    May 2009
    Location
    With Your Mom
    Age
    35
    Posts
    1,417
    Rep Power
    18

    Default Single Cam Starter PROBLEM

    so this week i got off to eat.. once i came back my car didnt wanna start... so we did the pushed trick and it started..... everyone told me it was the starter so i bought a new starter, and still dont turn on... i checked battery. its good. cables and fuses and still dont turn on.. it dont make ANY clickin noise. it basicly dont make ANY noise at all but i can hear my gas pump turn on... What could this problem be??
    key switch maybe???

  2. #2
    Look Behind You !!! -EnVus-'s Avatar
    Join Date
    Sep 2006
    Location
    Projects
    Posts
    8,743
    Rep Power
    35

    Default

    Check the starter relay since it sounds like no juice is getting to the starter itself.

  3. #3
    Certified Gearhead
    Join Date
    Jan 2009
    Location
    West Ga
    Age
    41
    Posts
    285
    Rep Power
    17

    Default

    basic but check your fueses also...

  4. #4
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    32

    Default

    Safety neutral switch is bad... Look on clutch pedal, unplug it and put a jumper wire.. If it starts then replace the switch..

    Also:

    2. Ignition switch, but normally it will lose dash lights or all power if that is bad..

    3. Check ground on the tranny to frame rail..

    4. be sure the single wire to starter is good, the little wire.. check for 12v with key in start position..

  5. #5
    del sol? 94_teg_ls's Avatar
    Join Date
    Nov 2007
    Location
    stockbridge---- 72.167.163.194----
    Age
    37
    Posts
    1,173
    Rep Power
    20

    Default

    Quote Originally Posted by 1civic View Post
    Safety neutral switch is bad... Look on clutch pedal, unplug it and put a jumper wire.. If it starts then replace the switch..

    Also:

    2. Ignition switch, but normally it will lose dash lights or all power if that is bad..

    3. Check ground on the tranny to frame rail..

    4. be sure the single wire to starter is good, the little wire.. check for 12v with key in start position..


    yeah we had that issue the other day with the ek
    /sig

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!