Single Cam Starter PROBLEM

[1civic]

Safety neutral switch is bad... Look on clutch pedal, unplug it and put a jumper wire.. If it starts then replace the switch..

Also:

2. Ignition switch, but normally it will lose dash lights or all power if that is bad..

3. Check ground on the tranny to frame rail..

4. be sure the single wire to starter is good, the little wire.. check for 12v with key in start position..

[94_teg_ls]

Safety neutral switch is bad... Look on clutch pedal, unplug it and put a jumper wire.. If it starts then replace the switch..

Also:

2. Ignition switch, but normally it will lose dash lights or all power if that is bad..

3. Check ground on the tranny to frame rail..

4. be sure the single wire to starter is good, the little wire.. check for 12v with key in start position..

yeah we had that issue the other day with the ek