Results 1 to 30 of 30

Thread: Symptoms of a blown motor?

Hybrid View

  1. #1
    Senior member
    Join Date
    Mar 2006
    Age
    42
    Posts
    1,569
    Rep Power
    22

    Default

    the check oil light came on, then the ticking started...ticking got worse...now motor won't turn over. i just did an oil change, but it wont make any apparent difference. should i just take it somewhere to make sure? where's the

    "try to turn the motor over by hand using a socket on the crank pulley bolt, if its locked down your motor is toast."

    ^ how do i go from there??? where's the crank pulley bolt at???
    Git R' Dun

  2. #2
    IA's MIA'r Sammich's Avatar
    Join Date
    Dec 2005
    Location
    Killin all imposter Sammiches
    Posts
    59,408
    Rep Power
    141

    Default

    Quote Originally Posted by TurboGSR831
    the check oil light came on, then the ticking started...ticking got worse...now motor won't turn over. i just did an oil change, but it wont make any apparent difference. should i just take it somewhere to make sure? where's the

    "try to turn the motor over by hand using a socket on the crank pulley bolt, if its locked down your motor is toast."

    ^ how do i go from there??? where's the crank pulley bolt at???

    usually the largest pulley*generally speaking*



    Quote Originally Posted by Sinfix_15 View Post
    You travel with so much luggage that it wont fit in a wagon? you dating a kardashian?

  3. #3
    Formerly Spyder Man
    Join Date
    Nov 2002
    Location
    Buford, Ga
    Age
    48
    Posts
    14,149
    Rep Power
    41

    Default

    Quote Originally Posted by TurboGSR831
    the check oil light came on, then the ticking started...ticking got worse...now motor won't turn over. i just did an oil change, but it wont make any apparent difference. should i just take it somewhere to make sure? where's the

    "try to turn the motor over by hand using a socket on the crank pulley bolt, if its locked down your motor is toast."

    ^ how do i go from there??? where's the crank pulley bolt at???
    look at the bottom of the motor where all the belts circle that is the crank pulley. in the center of that is the crank bolt which is what you are looking for... if you dont know where that is.. to be honest, not being a dick.. you shouldnt be trying to work on your own car.
    :boobies:

  4. #4
    Gods Chariot Vteckidd's Avatar
    Join Date
    Jul 2003
    Location
    Atlanta Centennial Park
    Age
    45
    Posts
    33,102
    Rep Power
    72

    Default

    Quote Originally Posted by TurboGSR831
    the check oil light came on, then the ticking started...ticking got worse...now motor won't turn over. i just did an oil change, but it wont make any apparent difference. should i just take it somewhere to make sure? where's the

    "try to turn the motor over by hand using a socket on the crank pulley bolt, if its locked down your motor is toast."

    ^ how do i go from there??? where's the crank pulley bolt at???
    you probably locked the motor up from oil starvation or your motor spun a bearing.

    the TICKING you describe was probably a ROD KNOCK. the OIL light is VERY BAD if it blinks. It means you have LESS than 5psi of oil pressure. Uusally when it blinks, its almost too late.

    Look into purchasing another motor, LS rods revving to 8000 dont last.

    The CRANK PULLEY no a B series motor is a 19mm socket, make surethe car is OUT OF GEAR an see if you can turn it by hand. but mostl ikely, its long gone.

    Cost, probably between $1000-3000 depedning on if you have a buddy do it or a shop
    Enterprise Data Resources- Ecommerce Project Manager
    -www.usedbarcode.net

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!