ok im putting a b18c1 in my car this weekend and i cant find a p72 so im gonna us my p28 well people have told me it will work now wondering if i have to repin or can i just plug it in and go just let me know thanks everyone
ok im putting a b18c1 in my car this weekend and i cant find a p72 so im gonna us my p28 well people have told me it will work now wondering if i have to repin or can i just plug it in and go just let me know thanks everyone
anyone even know
i think u should be able to just plug it in and the car should start. of course ur IAB's wont wrk and vtec will be way too low but id have to do some more research to give u a definite answer.
if you're obd1 or have obd2-1 conversion p28 will plug in w/o any repinning, but fuel, timing, vtec, iab will all be wrong for the car.
socketing/chipping the ecu w/ p72 maps and the appropriate sensors disabled is what you'll want to do.
let me know if i can be of assistance.
MAINSTREAM PERFORMANCE & DIGITAL BOX TUNING
ECU CHIPPING/SOCKETING/TUNING-HONDATA, CROME, BRE, TURBOEDIT
HONDATA DEALER/TUNER
NISSAN REALTIME-NISTUNE
MITSUBISHI AND SUBARU TUNING AVAILABLE!
Originally Posted by BTEC
thanks man but naw im just gonna run the p28 untell i can find a p72 so you know but yeah you could help if you know were i could find a wire diagram for the disturbutor (however you spell that)
if i'm not mistaken it's on this page some where.... http://www.honda-tech.com/zerothread/642479
You know better; next time will be a ban.